Description
Applicable on the Avaya Gateway G450. Monitors the CMG Hardware Fault Mask, CMG Registration State, CMG H248 Link Status.
Prerequisites
SNMP should be enabled in end device and device should support g3-avaya-mib OIDs and SNMP credentials should be attached against the device in portal.
How to Apply: This template is All instance selection based. It will not ask user to select any instance (s) while assigning it to a device.
Metric Parameters
Parameter | Description |
---|---|
Frequency | Warning Threshold | If the metric value satisfies the condition defined along with Warning Threshold value, then a notification is sent to the user. |
Critical Threshold | If the metric value satisfies the condition defined along with Critical Threshold value, then a notification is sent to the user. |
Alert | The alert value can be set to either Yes or No. If it is Yes, then an alert message is sent to the user. |
Metrics
cmg.h248.linkstatus
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.6889.2.9.1.3.3.0 |
Expression | NULL |
Description | Provides the Cisco media gateway h248 link staus. Status of the H248 link connecting this media gateway to its active call controller. Possible status values are 1- Up, 2- Down. Alert will get generated when status is 2- Down. [OID: 1.3.6.1.4.1.6889.2.9.1.3.3.0] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Avaya Gateway G450 Application Monitor |
Unit |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 5 | 1 – 1440 (mins) |
Filter | ||
Warning Operator | ||
Warning Threshold | ||
Warning Repeat Count | ||
Critical Operator | EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 2 | [{"1":"up"},{"2":"down"}] |
Critical Repeat Count | 1 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
cmg.h248.link.errorcode
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.6889.2.9.1.3.4.0 |
Expression | NULL |
Description | Most recently received H.248 error code affecting the link between this media gateway and its active call controller. If cmgH248LinkStatus is up(1), this value will be zero. [OID: 1.3.6.1.4.1.6889.2.9.1.3.4.0] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Avaya Gateway G450 Application Monitor |
Unit |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 5 | 1 – 1440 (mins) |
Filter | ||
Warning Operator | ||
Warning Threshold | ||
Warning Repeat Count | ||
Critical Operator | ||
Critical Threshold | ||
Critical Repeat Count | ||
Alert | No | Yes/No |
Graph (Yes/No) | No | Yes/No |
Sample Output
No graph
cmg.registration.state
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.6889.2.9.1.3.1.0 |
Expression | NULL |
Description | Provides the Cisco media gateway registration state. Shows whether this media gateway is currently registered with any call controller. Possible status values are 1- Registered, 2- Not Registered. [OID: 1.3.6.1.4.1.6889.2.9.1.3.1.0] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Avaya Gateway G450 Application Monitor |
Unit |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 5 | 1 – 1440 (mins) |
Filter | ||
Warning Operator | ||
Warning Threshold | ||
Warning Repeat Count | ||
Critical Operator | EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 2 | [{"1":"registered"},{"2":"notRegistered"}] |
Critical Repeat Count | 1 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph