Description
It monitors the Barracuda firewall metrics like Active VPN Tunnels, Box Service Status, Disk Space, Server Services Status and Traffic Statistics.
Prerequisites
SNMP should be enabled in end device and device should support PHION-MIB and SNMP credentials should be attached against the device in portal.
Metric Parameters
Parameter | Description |
---|---|
Frequency | Warning Threshold | If the metric value satisfies the condition defined along with Warning Threshold value, then a notification is sent to the user. |
Critical Threshold | If the metric value satisfies the condition defined along with Critical Threshold value, then a notification is sent to the user. |
Alert | The alert value can be set to either Yes or No. If it is Yes, then an alert message is sent to the user. |
Metrics
barracuda.fw.active.vpn.tunnels.count
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.10704.1.11.0 |
Expression | NULL |
Description | Number of live client-to-site VPN tunnels. [PHION-MIB::vpnUsers - 1.3.6.1.4.1.10704.1.11] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Barracuda FW - Active VPN Tunnels |
Unit |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 5 | 1 – 1440 (mins) |
Filter | ||
Warning Operator | ||
Warning Threshold | ||
Warning Repeat Count | ||
Critical Operator | ||
Critical Threshold | ||
Critical Repeat Count | ||
Alert | No | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
barracuda.fw.box.service.status
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.10704.1.0.1.2 |
Expression | NULL |
Description | It monitors the box services (like log, bdns, bsms, dist, boxfw, bsnmp, cstat, event, phibs, qstat, bsyslog, control, logwrap, psyslog, boxconfig etc) status. Service status possible values: 0 : down 1 : up, 2 : block, 3 : wild, 4 : removed. [PHION-MIB::boxServiceName - 1.3.6.1.4.1.10704.1.0.1.1, boxServiceState - 1.3.6.1.4.1.10704.1.0.1.2] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Barracuda FW - Box Service Status |
Unit |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 5 | 1 – 1440 (mins) |
Filter | NULL | Not Applicable |
Warning Operator | IN_LIST | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Warning Threshold | 2,3,4 | [{"0":"down"},{"1":"up"},{"2":"block"},{"3":"wild"},{"4":"removed"}] |
Warning Repeat Count | 1 | 1-12 |
Critical Operator | EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 0 | [{"0":"down"},{"1":"up"},{"2":"block"},{"3":"wild"},{"4":"removed"}] |
Critical Repeat Count | 1 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
barracuda.fw.disk.space.utilization
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.10704.1.13.1.5 |
Expression | NULL |
Description | Reports the used space in percent of the disk partition. [PHION-MIB:: partitionName - 1.3.6.1.4.1.10704.1.13.1.1, partitionUsedSpacePercent - 1.3.6.1.4.1.10704.1.13.1.5] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Barracuda FW - Disk Space |
Unit | % |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 5 | 1 – 1440 (mins) |
Filter | NULL | Not Applicable |
Warning Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Warning Threshold | 70 | 0-100 |
Warning Repeat Count | 1 | 1-12 |
Critical Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 90 | 0-100 |
Critical Repeat Count | 1 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
barracuda.fw.server.service.status
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.10704.1.1.1.2 |
Expression | NULL |
Description | It monitors all server(s) services (like S1_VPN, S1_HTTP, S1_NGFW, S2_VPN etc) status on the box. Service Status 0 : down 1 : up, 2 : block, 3 : wild, 4 : removed [PHION-MIB:: serverServiceName - 1.3.6.1.4.1.10704.1.1.1.1, serverServiceState - 1.3.6.1.4.1.10704.1.1.1.2] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Barracuda FW - Server Services Status |
Unit |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 5 | 1 – 1440 (mins) |
Filter | NULL | Not Applicable |
Warning Operator | IN_LIST | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Warning Threshold | 2,3,4 | [{"0":"down"},{"1":"up"},{"2":"block"},{"3":"wild"},{"4":"removed"}] |
Warning Repeat Count | 1 | 1-12 |
Critical Operator | EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 0 | [{"0":"down"},{"1":"up"},{"2":"block"},{"3":"wild"},{"4":"removed"}] |
Critical Repeat Count | 1 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
barracuda.fw.current.sessions.count
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.10704.1.10.1.1 |
Expression | NULL |
Description | It monitors the number of live firewall sessions count. [PHION-MIB::firewallSessions - 1.3.6.1.4.1.10704.1.10.1.1] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Barracuda FW - Traffic Statistics |
Unit |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 5 | 1 – 1440 (mins) |
Filter | NULL | Not Applicable |
Warning Operator | ||
Warning Threshold | ||
Warning Repeat Count | ||
Critical Operator | ||
Critical Threshold | ||
Critical Repeat Count | ||
Alert | No | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
barracuda.fw.current.packets.rate
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.10704.1.10.1.2 |
Expression | NULL |
Description | It monitors the number of live packets / second. [PHION-MIB::packetThroughput - 1.3.6.1.4.1.10704.1.10.1.2] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Barracuda FW - Traffic Statistics |
Unit | packets/sec |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 5 | 1 – 1440 (mins) |
Filter | NULL | Not Applicable |
Warning Operator | ||
Warning Threshold | ||
Warning Repeat Count | ||
Critical Operator | ||
Critical Threshold | ||
Critical Repeat Count | ||
Alert | No | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
barracuda.fw.data.rate
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.10704.1.10.1.3 |
Expression | NULL |
Description | It monitors the Data throughput in bits / second. [PHION-MIB::dataThroughput - 1.3.6.1.4.1.10704.1.10.1.3] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Barracuda FW - Traffic Statistics |
Unit | bps |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 5 | 1 – 1440 (mins) |
Filter | NULL | Not Applicable |
Warning Operator | ||
Warning Threshold | ||
Warning Repeat Count | ||
Critical Operator | ||
Critical Threshold | ||
Critical Repeat Count | ||
Alert | No | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph