Description

It monitors the ONL (Open Network Linux) hardware parameters like Fan status, Fan speed, Power supply status, Temperature reading and Temperature status. Validated on Switch Light OS SWL-OS-BCF-4.0.0(0) and BMF(Big Monitoring Fabric)-6.1.

Prerequisites

SNMP should be enabled in end device and device should support OCP-ONL-SENSOR-MIB OIDs and SNMP credentials should be attached against the device in portal.

How to Apply: This template is All instance selection based. It will not ask user to select any instance(s) while assigning it to a device.

Metric Parameters

Metric Parameters
ParameterDescription
Frequency
  • Frequency is the interval in which you want to probe and collect metric data from the target device/resource
  • Frequency is defined in minutes (min).
  • Warning ThresholdIf the metric value satisfies the condition defined along with Warning Threshold value, then a notification is sent to the user.
    Critical ThresholdIf the metric value satisfies the condition defined along with Critical Threshold value, then a notification is sent to the user.
    AlertThe alert value can be set to either Yes or No. If it is Yes, then an alert message is sent to the user.

    Metrics

    ocp.onl.fan.status

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.42623.1.2.2.1.3
    ExpressionNULL
    DescriptionIt monitors the ONL(Open Network Linux) fan status.
    [OCP-ONL-SENSOR-MIB OIDs: 1.3.6.1.4.1.42623.1.2.2.1.2, 1.3.6.1.4.1.42623.1.2.2.1.3, 1.3.6.1.4.1.42623.1.2.2.1.5]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameONL (Open Network Linux) - Fan
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency51 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical OperatorEQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold2[{"0":"missing"},{"1":"good"},{"2":"failed"}]
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    ocp.onl.fan.speed

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.42623.1.2.2.1.5
    ExpressionNULL
    DescriptionIt monitors the ONL(Open Network Linux) fan sensor speed in RPM.
    [OIDs: 1.3.6.1.4.1.42623.1.2.2.1.2, 1.3.6.1.4.1.42623.1.2.2.1.3, 1.3.6.1.4.1.42623.1.2.2.1.5]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameONL (Open Network Linux) - Fan
    Unitrpm

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency51 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical Operator
    Critical Threshold
    Critical Repeat Count
    AlertNoYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    ocp.onl.psu.status

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.42623.1.2.3.1.3,
    1.3.6.1.4.1.42623.1.2.3.1.4
    ExpressiononlPSUSensorsStatus
    DescriptionIt monitors the ONL (Open Network Linux) power supply unit sensors status.
    [OIDs: 1.3.6.1.4.1.42623.1.2.3.1.2, 1.3.6.1.4.1.42623.1.2.3.1.3, 1.3.6.1.4.1.42623.1.2.3.1.4]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameONL (Open Network Linux) - Power Supply Status
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency51 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical OperatorEQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold2[{"0":"missing"},{"1":"good"},{"2":"failed"}]
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    ocp.onl.temperature.status

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.42623.1.2.1.1.3
    ExpressionNULL
    DescriptionIt monitors the ONL (Open Network Linux) Temperature sensor status.
    [OIDs: 1.3.6.1.4.1.42623.1.2.1.1.2, 1.3.6.1.4.1.42623.1.2.1.1.3, 1.3.6.1.4.1.42623.1.2.1.1.4]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameONL (Open Network Linux) - Temperature
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency51 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical OperatorEQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold2[{"0":"missing"},{"1":"good"},{"2":"failed"}]
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    ocp.onl.temperature.value

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.42623.1.2.1.1.4
    ExpressionNULL
    DescriptionIt monitors the ONL (Open Network Linux) Temperature sensor reading in mC. [OCP-ONL-SENSOR-MIB OIDs: 1.3.6.1.4.1.42623.1.2.1.1.2, 1.3.6.1.4.1.42623.1.2.1.1.3, 1.3.6.1.4.1.42623.1.2.1.1.4]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameONL (Open Network Linux) - Temperature
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency51 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical Operator
    Critical Threshold
    Critical Repeat Count
    AlertNoYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph