Description
Monitors checkpoint modules like 1) Firewall: Checks module state, packet statistics and connections. 2) CPU: Overall and per core CPU utilization. 3) Memory: Hash memory and kernel memory failures. 4) Disk: Disk utilization. 5) Sensors: Checks fan, temperature and voltage sensor’s status. 6) Power Supply: Checks power supply. 7) Servers: Checks SVN,Log-server and Policy-server status. 8) High availability: Checks HA state and HA problem (usually: Synchronization,Filter, cphad and fwd) status.
Prerequisites
SNMP should be enabled in end device and device should support CHECKPOINT-MIB OIDs and SNMP credentials should be attached against the device in portal.
How to Apply: This template is All instance selection based. It will not ask user to select any instance(s) while assigning it to a device.
Metric Parameters
| Parameter | Description |
|---|---|
| Frequency | Warning Threshold | If the metric value satisfies the condition defined along with Warning Threshold value, then a notification is sent to the user. |
| Critical Threshold | If the metric value satisfies the condition defined along with Critical Threshold value, then a notification is sent to the user. |
| Alert | The alert value can be set to either Yes or No. If it is Yes, then an alert message is sent to the user. |
Metrics
checkpoint.disk.util
Metric Details
| Applicable for | Device |
| SNMP OID | 1.3.6.1.4.1.2620.1.6.7.6.1.3, 1.3.6.1.4.1.2620.1.6.7.6.1.4 |
| Expression | (multiDiskUsed/multiDiskSize)*100 |
| Description | Provides disk utilization in percent. [OIDs: 1.3.6.1.4.1.2620.1.6.7.6.1.2, 1.3.6.1.4.1.2620.1.6.7.6.1.3, 1.3.6.1.4.1.2620.1.6.7.6.1.4] |
| Category | SNMP monitors |
| Collector Type | Gateway |
| Monitor Name | Checkpoint Disk Utilization |
| Unit | % |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 15 | 1 – 1440 (mins) |
| Filter | NULL | Not Applicable |
| Warning Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
| Warning Threshold | 80 | 0-100 |
| Warning Repeat Count | 1 | 1-12 |
| Critical Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
| Critical Threshold | 90 | 0-100 |
| Critical Repeat Count | 1 | 1-12 |
| Alert | Yes | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
Disk Utilization
checkpoint.fan.sensor.status
Metric Details
| Applicable for | Device |
| SNMP OID | 1.3.6.1.4.1.2620.1.6.7.8.2.1.6, 1.3.6.1.4.1.2620.1.6.7.8.2.1.3, 1.3.6.1.4.1.2620.1.6.7.8.2.1.4 |
| Expression | fanSpeedSensorStatus |
| Description | Provides fan speed sensor status. [OIDs: 1.3.6.1.4.1.2620.1.6.7.8.2.1.2, 1.3.6.1.4.1.2620.1.6.7.8.2.1.3, 1.3.6.1.4.1.2620.1.6.7.8.2.1.4, 1.3.6.1.4.1.2620.1.6.7.8.2.1.6] |
| Category | SNMP monitors |
| Collector Type | Gateway |
| Monitor Name | Checkpoint Fan Status |
| Unit | None |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 5 | 1 – 1440 (mins) |
| Filter | NULL | Not Applicable |
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | NOT_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
| Critical Threshold | 0 | [{"0":"OK"},{"1":"OUTOFRANGE"},{"2":"READINGERROR"}] |
| Critical Repeat Count | 1 | 1-12 |
| Alert | Yes | Yes/No |
| Graph (Yes/No) | No | Yes/No |
Sample Output
No graph
checkpoint.fw.num.connections
Metric Details
| Applicable for | Device |
| SNMP OID | 1.3.6.1.4.1.2620.1.1.25.3.0, 1.3.6.1.4.1.2620.1.1.25.1.0, 1.3.6.1.4.1.2620.1.1.25.4.0 |
| Expression | fwNumConn |
| Description | Provides number of concurrent IPv6 and IPv4 connections, peak number of concurrent connections since last reboot and name of security policy currently enforced. [OIDs: 1.3.6.1.4.1.2620.1.1.25.1.0, 1.3.6.1.4.1.2620.1.1.25.3.0, 1.3.6.1.4.1.2620.1.1.25.4.0] |
| Category | SNMP monitors |
| Collector Type | Gateway |
| Monitor Name | Checkpoint FW Connections |
| Unit | None |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 10 | 1 – 1440 (mins) |
| Filter | ||
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | ||
| Critical Threshold | ||
| Critical Repeat Count | ||
| Alert | No | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
Firewall Concurrent Connections
checkpoint.fw.log.server.state
Metric Details
| Applicable for | Device |
| SNMP OID | 1.3.6.1.4.1.2620.1.1.30.3.1.3, 1.3.6.1.4.1.2620.1.1.30.3.1.4 |
| Expression | fwLSConnState |
| Description | Connectivity state with the log server Ok(0), Error(1) and Not Active(2) and if error occurs, its description will be provided. [OIDs: 1.3.6.1.4.1.2620.1.1.30.3.1.3, 1.3.6.1.4.1.2620.1.1.30.3.1.4] |
| Category | SNMP monitors |
| Collector Type | Gateway |
| Monitor Name | Checkpoint FW Log-Server Connectivity |
| Unit | None |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 15 | 1 – 1440 (mins) |
| Filter | NULL | Not Applicable |
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | NOT_IN_LIST | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
| Critical Threshold | 0,2 | [{"0":"Ok"},{"1":"Error"},{"2":"NotActive"}] |
| Critical Repeat Count | 1 | 1-12 |
| Alert | Yes | Yes/No |
| Graph (Yes/No) | No | Yes/No |
Sample Output
No graph
checkpoint.fw.hmem.failed.alloc
Metric Details
| Applicable for | Device |
| SNMP OID | 1.3.6.1.4.1.2620.1.1.26.1.21.0 |
| Expression | NULL |
| Description | Hash memory allocation failures. [OID: 1.3.6.1.4.1.2620.1.1.26.1.21.0] |
| Category | SNMP monitors |
| Collector Type | Gateway |
| Monitor Name | Checkpoint FW Memory Failures |
| Unit | None |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 10 | 1 – 1440 (mins) |
| Filter | ||
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | ||
| Critical Threshold | ||
| Critical Repeat Count | ||
| Alert | No | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
Hash Memory Allocation Failures
checkpoint.fw.hmem.failed.free
Metric Details
| Applicable for | Device |
| SNMP OID | 1.3.6.1.4.1.2620.1.1.26.1.22.0 |
| Expression | NULL |
| Description | Hash memory free failures. [OID: 1.3.6.1.4.1.2620.1.1.26.1.22.0] |
| Category | SNMP monitors |
| Collector Type | Gateway |
| Monitor Name | Checkpoint FW Memory Failures |
| Unit | None |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 10 | 1 – 1440 (mins) |
| Filter | ||
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | ||
| Critical Threshold | ||
| Critical Repeat Count | ||
| Alert | No | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
Hash Memory Free Failures
checkpoint.fw.kmem.failed.alloc
Metric Details
| Applicable for | Device |
| SNMP OID | 1.3.6.1.4.1.2620.1.1.26.2.15.0 |
| Expression | NULL |
| Description | Kernel memory allocation failures. [OID:1.3.6.1.4.1.2620.1.1.26.2.15.0] |
| Category | SNMP monitors |
| Collector Type | Gateway |
| Monitor Name | Checkpoint FW Memory Failures |
| Unit | None |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 10 | 1 – 1440 (mins) |
| Filter | ||
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | ||
| Critical Threshold | ||
| Critical Repeat Count | ||
| Alert | No | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
Kernel Memory Allocation Failures
checkpoint.fw.kmem.failed.free
Metric Details
| Applicable for | Device |
| SNMP OID | 1.3.6.1.4.1.2620.1.1.26.2.16.0 |
| Expression | NULL |
| Description | Kernel memory free failures. [OID: 1.3.6.1.4.1.2620.1.1.26.2.16.0] |
| Category | SNMP monitors |
| Collector Type | Gateway |
| Monitor Name | Checkpoint FW Memory Failures |
| Unit | None |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 10 | 1 – 1440 (mins) |
| Filter | ||
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | ||
| Critical Threshold | ||
| Critical Repeat Count | ||
| Alert | No | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
Kernel Memory Free Failures
checkpoint.fw.module.state
Metric Details
| Applicable for | Device |
| SNMP OID | 1.3.6.1.4.1.2620.1.1.1.0 |
| Expression | NULL |
| Description | The state of the firewall module. [OID: 1.3.6.1.4.1.2620.1.1.1.0] |
| Category | SNMP monitors |
| Collector Type | Gateway |
| Monitor Name | Checkpoint FW Module State |
| Unit | None |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 15 | 1 – 1440 (mins) |
| Filter | ||
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | NOT_EQUALS_IGNORE_CASE | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
| Critical Threshold | Installed | 0..255 |
| Critical Repeat Count | 1 | 1-12 |
| Alert | Yes | Yes/No |
| Graph (Yes/No) | No | Yes/No |
Sample Output
No graph
checkpoint.fw.accepted.pkts
Metric Details
| Applicable for | Device |
| SNMP OID | 1.3.6.1.4.1.2620.1.1.4.0 |
| Expression | fwAccepted*60 |
| Description | Total number of accepted packets since last reboot. [OID: 1.3.6.1.4.1.2620.1.1.4.0] |
| Category | SNMP monitors |
| Collector Type | Gateway |
| Monitor Name | Checkpoint FW Packet Statistics |
| Unit | packet/min |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 10 | 1 – 1440 (mins) |
| Filter | ||
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | ||
| Critical Threshold | ||
| Critical Repeat Count | ||
| Alert | No | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
Firewall Accepted Packets
checkpoint.fw.rejected.pkts
Metric Details
| Applicable for | Device |
| SNMP OID | 1.3.6.1.4.1.2620.1.1.5.0 |
| Expression | fwRejected*60 |
| Description | Total number of rejected packets since last reboot. [OID: 1.3.6.1.4.1.2620.1.1.5.0] |
| Category | SNMP monitors |
| Collector Type | Gateway |
| Monitor Name | Checkpoint FW Packet Statistics |
| Unit | packet/min |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 10 | 1 – 1440 (mins) |
| Filter | ||
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | ||
| Critical Threshold | ||
| Critical Repeat Count | ||
| Alert | No | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
Firewall Rejected Packets
checkpoint.fw.dropped.pkts
Metric Details
| Applicable for | Device |
| SNMP OID | 1.3.6.1.4.1.2620.1.1.6.0 |
| Expression | fwDropped*60 |
| Description | Total number of dropped packets since last reboot. [OID: 1.3.6.1.4.1.2620.1.1.6.0] |
| Category | SNMP monitors |
| Collector Type | Gateway |
| Monitor Name | Checkpoint FW Packet Statistics |
| Unit | packet/min |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 10 | 1 – 1440 (mins) |
| Filter | ||
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | ||
| Critical Threshold | ||
| Critical Repeat Count | ||
| Alert | No | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
Firewall Dropped Packets
checkpoint.fw.logged.pkts
Metric Details
| Applicable for | Device |
| SNMP OID | 1.3.6.1.4.1.2620.1.1.7.0 |
| Expression | fwLogged*60 |
| Description | The number of logged packets. [OID: 1.3.6.1.4.1.2620.1.1.7.0] |
| Category | SNMP monitors |
| Collector Type | Gateway |
| Monitor Name | Checkpoint FW Packet Statistics |
| Unit | packet/min |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 10 | 1 – 1440 (mins) |
| Filter | ||
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | ||
| Critical Threshold | ||
| Critical Repeat Count | ||
| Alert | No | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
Firewall Logged Packets
checkpoint.ha.problem.status
Metric Details
| Applicable for | Device |
| SNMP OID | 1.3.6.1.4.1.2620.1.5.13.1.3, 1.3.6.1.4.1.2620.1.5.13.1.6 |
| Expression | haProblemStatus |
| Description | Provides High Availability(HA) problem status. [OIDs: 1.3.6.1.4.1.2620.1.5.13.1.2, 1.3.6.1.4.1.2620.1.5.13.1.3, 1.3.6.1.4.1.2620.1.5.13.1.6] |
| Category | SNMP monitors |
| Collector Type | Gateway |
| Monitor Name | Checkpoint HA Problem Status |
| Unit | None |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 15 | 1 – 1440 (mins) |
| Filter | NULL | Not Applicable |
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | NOT_EQUALS_IGNORE_CASE | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
| Critical Threshold | OK | 0..255 |
| Critical Repeat Count | 1 | 1-12 |
| Alert | Yes | Yes/No |
| Graph (Yes/No) | No | Yes/No |
Sample Output
No graph
checkpoint.ha.state
Metric Details
| Applicable for | Device |
| SNMP OID | 1.3.6.1.4.1.2620.1.5.6.0, 1.3.6.1.4.1.2620.1.5.2.0, 1.3.6.1.4.1.2620.1.5.5.0, 1.3.6.1.4.1.2620.1.5.11.0, 1.3.6.1.4.1.2620.1.5.102.0 |
| Expression | haState |
| Description | Provides High Availability(HA) Status. Possible HA states are: Active, Standby, Active Attention, Down. Active - Inspecting traffic, Standby - Ready to inspect traffic but there is another active member, this member is now in the standby mode. Active Attention - The member is blocked because there are no other available members, it will continue as the active member. Down - Member is down or other members see it as down. [OIDs: 1.3.6.1.4.1.2620.1.5.6.0, 1.3.6.1.4.1.2620.1.5.5.0, 1.3.6.1.4.1.2620.1.5.2.0, 1.3.6.1.4.1.2620.1.5.11.0, 1.3.6.1.4.1.2620.1.5.102.0] |
| Category | SNMP monitors |
| Collector Type | Gateway |
| Monitor Name | Checkpoint HA Status |
| Unit |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 15 | 1 – 1440 (mins) |
| Filter | ||
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | NOT_INS | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
| Critical Threshold | active,standby | 0..255 |
| Critical Repeat Count | 1 | 1-12 |
| Alert | Yes | Yes/No |
| Graph (Yes/No) | No | Yes/No |
Sample Output
No graph
checkpoint.overall.cpu.util
Metric Details
| Applicable for | Device |
| SNMP OID | 1.3.6.1.4.1.2620.1.6.7.2.4.0 |
| Expression | NULL |
| Description | Overall CPU utilization in percent. [OID: 1.3.6.1.4.1.2620.1.6.7.2.4.0] |
| Category | SNMP monitors |
| Collector Type | Gateway |
| Monitor Name | Checkpoint Overall CPU Utilization |
| Unit | % |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 10 | 1 – 1440 (mins) |
| Filter | ||
| Warning Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
| Warning Threshold | 80 | 0-100 |
| Warning Repeat Count | 1 | 1-12 |
| Critical Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
| Critical Threshold | 90 | 0-100 |
| Critical Repeat Count | 1 | 1-12 |
| Alert | Yes | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
Overall CPU Utilization
checkpoint.ps.status
Metric Details
| Applicable for | Device |
| SNMP OID | 1.3.6.1.4.1.2620.1.9.4.0, 1.3.6.1.4.1.2620.1.9.5.0, 1.3.6.1.4.1.2620.1.9.101.0, 1.3.6.1.4.1.2620.1.9.102.0 |
| Expression | if(dtpsLicensedUsers>0,dtpsStatCode,-1) |
| Description | Provides policy server status and its information. [OIDs: 1.3.6.1.4.1.2620.1.9.101, 1.3.6.1.4.1.2620.1.9.102, 1.3.6.1.4.1.2620.1.9.4, 1.3.6.1.4.1.2620.1.9.5] |
| Category | SNMP monitors |
| Collector Type | Gateway |
| Monitor Name | Checkpoint Policy Server Status |
| Unit | None |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 15 | 1 – 1440 (mins) |
| Filter | ||
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | GREATER_THAN | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
| Critical Threshold | 0 | |
| Critical Repeat Count | 1 | 1-12 |
| Alert | Yes | Yes/No |
| Graph (Yes/No) | No | Yes/No |
Sample Output
No graph
checkpoint.powersupply.status
Metric Details
| Applicable for | Device |
| SNMP OID | 1.3.6.1.4.1.2620.1.6.7.9.1.1.2 |
| Expression | NULL |
| Description | Provides power supply status. [OIDs: 1.3.6.1.4.1.2620.1.6.7.9.1.1.1, 1.3.6.1.4.1.2620.1.6.7.9.1.1.2] |
| Category | SNMP monitors |
| Collector Type | Gateway |
| Monitor Name | Checkpoint Power Supply Status |
| Unit | None |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 5 | 1 – 1440 (mins) |
| Filter | NULL | Not Applicable |
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | NOT_EQUALS_IGNORE_CASE | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
| Critical Threshold | Up | 0..255 |
| Critical Repeat Count | 1 | 1-12 |
| Alert | Yes | Yes/No |
| Graph (Yes/No) | No | Yes/No |
Sample Output
No graph
checkpoint.svn.status
Metric Details
| Applicable for | Device |
| SNMP OID | 1.3.6.1.4.1.2620.1.6.101.0, 1.3.6.1.4.1.2620.1.6.102.0, 1.3.6.1.4.1.2620.1.6.4.1.0 |
| Expression | svnStatCode |
| Description | Provides SVN status. [OIDs: 1.3.6.1.4.1.2620.1.6.101.0, 1.3.6.1.4.1.2620.1.6.102.0, 1.3.6.1.4.1.2620.1.6.4.1.0] |
| Category | SNMP monitors |
| Collector Type | Gateway |
| Monitor Name | Checkpoint SVN Status |
| Unit | None |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 15 | 1 – 1440 (mins) |
| Filter | ||
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | NOT_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
| Critical Threshold | 0 | |
| Critical Repeat Count | 1 | 1-12 |
| Alert | Yes | Yes/No |
| Graph (Yes/No) | No | Yes/No |
Sample Output
No graph
checkpoint.temp.sensor.status
Metric Details
| Applicable for | Device |
| SNMP OID | 1.3.6.1.4.1.2620.1.6.7.8.1.1.6, 1.3.6.1.4.1.2620.1.6.7.8.1.1.3, 1.3.6.1.4.1.2620.1.6.7.8.1.1.4 |
| Expression | tempertureSensorStatus |
| Description | Provides status of temperature sensor. [OIDs: 1.3.6.1.4.1.2620.1.6.7.8.1.1.2, 1.3.6.1.4.1.2620.1.6.7.8.1.1.3, 1.3.6.1.4.1.2620.1.6.7.8.1.1.4, 1.3.6.1.4.1.2620.1.6.7.8.1.1.6] |
| Category | SNMP monitors |
| Collector Type | Gateway |
| Monitor Name | Checkpoint Temperature Status |
| Unit | None |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 5 | 1 – 1440 (mins) |
| Filter | NULL | Not Applicable |
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | NOT_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
| Critical Threshold | 0 | [{"0":"OK"},{"1":"OUTOFRANGE"},{"2":"READINGERROR"}] |
| Critical Repeat Count | 1 | 1-12 |
| Alert | Yes | Yes/No |
| Graph (Yes/No) | No | Yes/No |
Sample Output
Temperature Status
checkpoint.voltage.status
Metric Details
| Applicable for | Device |
| SNMP OID | 1.3.6.1.4.1.2620.1.6.7.8.3.1.3, 1.3.6.1.4.1.2620.1.6.7.8.3.1.4, 1.3.6.1.4.1.2620.1.6.7.8.3.1.6 |
| Expression | voltageSensorStatus |
| Description | Provides voltage sensor status and its value. [OIDs: 1.3.6.1.4.1.2620.1.6.7.8.3.1.2, 1.3.6.1.4.1.2620.1.6.7.8.3.1.3, 1.3.6.1.4.1.2620.1.6.7.8.3.1.4, 1.3.6.1.4.1.2620.1.6.7.8.3.1.6] |
| Category | SNMP monitors |
| Collector Type | Gateway |
| Monitor Name | Checkpoint Voltage Status |
| Unit | None |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 5 | 1 – 1440 (mins) |
| Filter | NULL | Not Applicable |
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | NOT_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
| Critical Threshold | 0 | [{"0":"OK"},{"1":"OUTOFRANGE"},{"2":"READINGERROR"}] |
| Critical Repeat Count | 1 | 1-12 |
| Alert | Yes | Yes/No |
| Graph (Yes/No) | No | Yes/No |
Sample Output
No graph