Description
Checks management mode (active or not), management status, if management is alive or not and is there any management license violation detected.
Prerequisites
SNMP should be enabled in end device and device should support CHECKPOINT-MIB OIDs and SNMP credentials should be attached against the device in portal.
Metric Parameters
Parameter | Description |
---|---|
Frequency | Warning Threshold | If the metric value satisfies the condition defined along with Warning Threshold value, then a notification is sent to the user. |
Critical Threshold | If the metric value satisfies the condition defined along with Critical Threshold value, then a notification is sent to the user. |
Alert | The alert value can be set to either Yes or No. If it is Yes, then an alert message is sent to the user. |
Metrics
checkpoint.mngmt.active.status
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.2620.1.7.5.0 |
Expression | NULL |
Description | Checks whether management mode is active or not. [OID: 1.3.6.1.4.1.2620.1.7.5.0] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Checkpoint Security Management Status |
Unit | None |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 10 | 1 – 1440 (mins) |
Filter | ||
Warning Operator | ||
Warning Threshold | ||
Warning Repeat Count | ||
Critical Operator | NOT_EQUALS_IGNORE_CASE | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | active | 0..255 |
Critical Repeat Count | 1 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | No | Yes/No |
Sample Output
No graph
checkpoint.mngmt.status
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.2620.1.7.102.0, 1.3.6.1.4.1.2620.1.7.101.0 |
Expression | mgStatCode |
Description | Checks whether security management status is OK or not. [OID: 1.3.6.1.4.1.2620.1.7.102.0] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Checkpoint Security Management Status |
Unit | None |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 10 | 1 – 1440 (mins) |
Filter | ||
Warning Operator | ||
Warning Threshold | ||
Warning Repeat Count | ||
Critical Operator | NOT_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 0 | |
Critical Repeat Count | 1 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | No | Yes/No |
Sample Output
No graph
checkpoint.mngmt.alive.state
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.2620.1.7.6.0 |
Expression | if(mgFwmIsAlive==1,1,0) |
Description | Checks whether security management is alive or not. [OID: 1.3.6.1.4.1.2620.1.7.6.0] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Checkpoint Security Management Status |
Unit | None |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 10 | 1 – 1440 (mins) |
Filter | ||
Warning Operator | ||
Warning Threshold | ||
Warning Repeat Count | ||
Critical Operator | NOT_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 1 | [{"0":"Notalive"},{"1":"Alive"}] |
Critical Repeat Count | 1 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | No | Yes/No |
Sample Output
No graph
checkpoint.mngmt.licenseviolation.status
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.2620.1.7.10.0, 1.3.6.1.4.1.2620.1.7.11.0 |
Expression | mgIsLicenseViolation |
Description | Checks if there is license violation detected. [OIDs: 1.3.6.1.4.1.2620.1.7.10.0, 1.3.6.1.4.1.2620.1.7.11.0] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Checkpoint Security Management Status |
Unit | None |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 10 | 1 – 1440 (mins) |
Filter | ||
Warning Operator | ||
Warning Threshold | ||
Warning Repeat Count | ||
Critical Operator | NOT_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 0 | |
Critical Repeat Count | 1 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | No | Yes/No |
Sample Output
No graph