Description

Monitors Cisco Enhanced Interior Gateway Protocol (EIGRP) neighbors count per AS and interface per count. This template can be applicable on Cisco routers.

Prerequisites

SNMP should be enabled in end device and device should support CISCO-EIGRP-MIB OIDs and SNMP credentials should be attached against the device in portal.

How to Apply: This template is All instance selection based. It will not ask user to select any instance (s) while assigning it to a device.

Metric Parameters

Metric Parameters
ParameterDescription
Frequency
  • Frequency is the interval in which you want to probe and collect metric data from the target device/resource
  • Frequency is defined in minutes (min).
  • Warning ThresholdIf the metric value satisfies the condition defined along with Warning Threshold value, then a notification is sent to the user.
    Critical ThresholdIf the metric value satisfies the condition defined along with Critical Threshold value, then a notification is sent to the user.
    AlertThe alert value can be set to either Yes or No. If it is Yes, then an alert message is sent to the user.

    Metrics

    cisco.eigrp.neighbor.count

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.9.9.449.1.1.1.1.2, 1.3.6.1.4.1.9.9.449.1.2.1.1.2
    ExpressioncEigrpNbrCount
    DescriptionMonitors the total number of live EIGRP neighbors formed on all interfaces whose IP addresses fall under networks configured in the EIGRP AS. [OIDs: 1.3.6.1.4.1.9.9.449.1.2.1.1.2, 1.3.6.1.4.1.9.9.449.1.1.1.1.2]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameCisco EIGRP Neighbor Count
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical Operator
    Critical Threshold
    Critical Repeat Count
    AlertNoYes/No
    Graph (Yes/No)YesYes/No

    Note: As Alert is not enabled on the above metric, the fields are left blank.

    Sample Output

    EIGRP Neighbor Count

    EIGRP Neighbor Count

    cisco.eigrp.ifpeer.count

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.9.9.449.1.5.1.1.3
    ExpressionNULL
    DescriptionMonitors the number of EIGRP adjacencies currently formed with peers reached through this interface. [OIDs: 1.3.6.1.4.1.9.9.449.1.5.1.1.3, 1.3.6.1.4.1.9.9.449.1.4.1.1.4, 1.3.6.1.2.1.2.2.1.2]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameCisco EIGRP Peer Count
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical Operator
    Critical Threshold
    Critical Repeat Count
    AlertNoYes/No
    Graph (Yes/No)YesYes/No

    Note: As Alert is not enabled on the above metric, the fields are left blank.

    Sample Output

    EIGRP Peer Count

    EIGRP Peer Count