Description

Monitors the entity NVRAM utilization and entity LED status.

Prerequisites

SNMP should be enabled in end device and device should support CISCO-ENTITY-EXT-MIB OIDs and SNMP credentials should be attached against the device in portal.

How to Apply: This template is All instance selection based. It will not ask user to select any instance (s) while assigning it to a device.

Metric Parameters

Metric Parameters
ParameterDescription
Frequency
  • Frequency is the interval in which you want to probe and collect metric data from the target device/resource
  • Frequency is defined in minutes (min).
  • Warning ThresholdIf the metric value satisfies the condition defined along with Warning Threshold value, then a notification is sent to the user.
    Critical ThresholdIf the metric value satisfies the condition defined along with Critical Threshold value, then a notification is sent to the user.
    AlertThe alert value can be set to either Yes or No. If it is Yes, then an alert message is sent to the user.

    Metrics

    cisco.entity.ext.nvram.free

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.9.9.195.1.1.1.2, 1.3.6.1.4.1.9.9.195.1.1.1.3
    ExpressionceExtNVRAMSize - ceExtNVRAMUsed
    DescriptionTotal number of free bytes of NVRAM in the entity. [OIDs: 1.3.6.1.4.1.9.9.195.1.1.1.2, 1.3.6.1.4.1.9.9.195.1.1.1.3]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameCisco Entity EXT Physical Processor
    UnitBytes

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical Operator
    Critical Threshold
    Critical Repeat Count
    AlertNoYes/No
    Graph (Yes/No)YesYes/No

    Note: As Alert is not enabled on the above metric, the fields are left blank.

    Sample Output

    NVRAM Free

    NVRAM Free

    cisco.entity.ext.nvram.used

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.9.9.195.1.1.1.3
    ExpressionceExtNVRAMUsed
    DescriptionNumber of bytes of NVRAM in use. [OID: 1.3.6.1.4.1.9.9.195.1.1.1.3]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameCisco Entity EXT Physical Processor
    UnitBytes

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical Operator
    Critical Threshold
    Critical Repeat Count
    AlertNoYes/No
    Graph (Yes/No)YesYes/No

    Note: As Alert is not enabled on the above metric, the fields are left blank.

    Sample Output

    NVRAM Used

    NVRAM Used

    cisco.entity.ext.nvram.utilization

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.9.9.195.1.1.1.2, 1.3.6.1.4.1.9.9.195.1.1.1.3
    Expression(ceExtNVRAMUsed / ceExtNVRAMSize) *100
    DescriptionTotal percentage of bytes of NVRAM in use. [1.3.6.1.4.1.9.9.195.1.1.1.3, 1.3.6.1.4.1.9.9.195.1.1.1.3]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameCisco Entity EXT Physical Processor
    Unit%

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical Operator
    Critical Threshold
    Critical Repeat Count
    AlertNoYes/No
    Graph (Yes/No)YesYes/No

    Note: As Alert is not enabled on the above metric, the fields are left blank.

    Sample Output

    NVRAM Utilization

    NVRAM Utilization

    cisco.entity.led.status

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.9.9.195.1.3.1.2
    ExpressionNULL
    DescriptionMonitors the color of the LED. Possible values are 1- off, 2- green, 3- amber, 4- red.
    [OID: 1.3.6.1.4.1.9.9.195.1.3.1.2]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameCisco Entity LED Status
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    FilterNULLNot Applicable
    Warning OperatorEQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold31-4
    Warning Repeat Count11-12
    Critical OperatorEQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold41-4
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph