Description

Applicable on Cisco devices which have a Flash device, mostly Fiber Channel Switches. Monitors the flash device status.

Prerequisites

SNMP should be enabled in end device and device should support CISCO-FLASH-MIB OIDs and SNMP credentials should be attached against the device in portal.

How to Apply: This template is All instance selection based. It will not ask user to select any instance (s) while assigning it to a device.

Metric Parameters

Metric Parameters
ParameterDescription
Frequency
  • Frequency is the interval in which you want to probe and collect metric data from the target device/resource
  • Frequency is defined in minutes (min).
    • Warning ThresholdIf the metric value satisfies the condition defined along with Warning Threshold value, then a notification is sent to the user.
    Critical ThresholdIf the metric value satisfies the condition defined along with Critical Threshold value, then a notification is sent to the user.
    AlertThe alert value can be set to either Yes or No. If it is Yes, then an alert message is sent to the user.

    Metrics

    cisco.flash.partition.utilization

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.9.9.10.1.1.4.1.1.4, 1.3.6.1.4.1.9.9.10.1.1.4.1.1.5
    Expression((ciscoFlashPartitionSize - ciscoFlashPartitionFreeSpace)/ciscoFlashPartitionSize) * 100
    DescriptionMonitors the utilization of Flash partitions. [OID: 1.3.6.1.4.1.9.9.10.1.1.4.1.1.10, 1.3.6.1.4.1.9.9.10.1.1.4.1.1.4, 1.3.6.1.4.1.9.9.10.1.1.4.1.1.5]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameCisco Flash Partition
    Unit%

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    FilterNULLNot Applicable
    Warning OperatorGREATER_THAN_EQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold800-100
    Warning Repeat Count11-12
    Critical OperatorGREATER_THAN_EQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold900-100
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    Flash Partition Utilization

    Flash Partition Utilization

    cisco.flash.partition.status

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.9.9.10.1.1.4.1.1.8
    ExpressionNULL
    DescriptionMonitors the status of a partition on a flash device of a Cisco Router.
    [OID: 1.3.6.1.4.1.9.9.10.1.1.4.1.1.10, 1.3.6.1.4.1.9.9.10.1.1.4.1.1.8]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameCisco Flash Partition
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical OperatorEQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold11-3
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    Flash Partition Status

    Flash Partition Status