Description

Monitors the Cisco Hardware Status- Power, Fan, Voltage and Temperature. This template can be applied on Cisco devices which support Environmental Monitors or hardware sensors.

Prerequisites

SNMP should be enabled in end device and device should support CISCO-ENVMON-MIB OIDs and SNMP credentials should be attached against the device in portal.

How to Apply: This template is All instance selection based. It will not ask user to select any instance (s) while assigning it to a device.

Metric Parameters

Metric Parameters
ParameterDescription
Frequency
  • Frequency is the interval in which you want to probe and collect metric data from the target device/resource
  • Frequency is defined in minutes (min).
  • Warning ThresholdIf the metric value satisfies the condition defined along with Warning Threshold value, then a notification is sent to the user.
    Critical ThresholdIf the metric value satisfies the condition defined along with Critical Threshold value, then a notification is sent to the user.
    AlertThe alert value can be set to either Yes or No. If it is Yes, then an alert message is sent to the user.

    Metrics

    system.power.status

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.9.9.13.1.5.1.3
    ExpressionNULL
    DescriptionMonitors the current state of the power supply. Possible values are 1 -Normal, 2 -Warning, 3 -Critical, 4 -Shutdown, 5 -Not present, 6 -Not functioning. Alerts if power status value in 2 or 3 or 4 or 6.
    [OID: ciscoEnvMonSupplyStatusDescr - 1.3.6.1.4.1.9.9.13.1.5.1.2; ciscoEnvMonSupplyState - 1.3.6.1.4.1.9.9.13.1.5.1.3]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameCisco Power Status
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency51 – 1440 (mins)
    FilterNULLNot Applicable
    Warning OperatorEQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold21-6
    Warning Repeat Count11-12
    Critical OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold3,4,61-6
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    Power Status

    Power Status

    system.voltage.status

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.9.9.13.1.2.1.7, 1.3.6.1.4.1.9.9.13.1.2.1.3
    ExpressionciscoEnvMonVoltageState
    DescriptionVoltage status. Possible status values are 1-normal, 2-warning, 3-critical, 4-shutdown, 5-not present, 6-not functioning. Alerts if voltage status value in 2 or 3 or 4 or 6 [OIDs: 1.3.6.1.4.1.9.9.13.1.2.1.2, 1.3.6.1.4.1.9.9.13.1.2.1.7]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameCisco Voltage Status
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency51 – 1440 (mins)
    FilterNULLNot Applicable
    Warning OperatorEQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold21-6
    Warning Repeat Count11-12
    Critical OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold3,4,61-6
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    system.temperature.status

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.9.9.13.1.3.1.6
    Expression
    DescriptionTemperature status. Possible status values are 1 -Normal, 2 -Warning, 3 -Critical, 4 -Shutdown, 5 -Not present, 6 -Not functioning. Alerts if temperature status value equals to 2,3,4 and 6.
    [OIDs: 1.3.6.1.4.1.9.9.13.1.3.1.6; 1.3.6.1.4.1.9.9.13.1.3.1.2]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameCisco Temperature Status
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency51 – 1440 (mins)
    FilterNULLNot Applicable
    Warning OperatorEQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold21-6
    Warning Repeat Count11-12
    Critical OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold3,4,61-6
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    Temperature Status

    Temperature Status

    system.fan.status

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.9.9.13.1.4.1.3
    ExpressionNULL
    DescriptionStatus of internal fan. Possible status values are 1 -Normal, 2 -Warning, 3 -Critical, 4 -Shutdown, 5 -Not present, 6 -Not functioning. Alerts if value equals to 2 or 3 or 4 or 6
    [OIDs: 1.3.6.1.4.1.9.9.13.1.4.1.3, 1.3.6.1.4.1.9.9.13.1.4.1.2]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameCisco Fan Status
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency51 – 1440 (mins)
    FilterNULLNot Applicable
    Warning OperatorEQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold21-6
    Warning Repeat Count11-12
    Critical OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold3,4,61-6
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    Fan Status

    Fan Status