Description

Monitors the hardware, application status like RAID status, fan, power supply, CPU, memory utilization etc., of the Iron port device. Applicable on iron port security devices.

Prerequisites

SNMP should be enabled in end device and device should support ASYNCOS-MAIL-MIB OIDs and SNMP credentials should be attached against the device in portal.

How to Apply: This template is All instance selection based. It will not ask user to select any instance (s) while assigning it to a device.

Metric Parameters

Metric Parameters
ParameterDescription
Frequency
  • Frequency is the interval in which you want to probe and collect metric data from the target device/resource
  • Frequency is defined in minutes (min).
  • Warning ThresholdIf the metric value satisfies the condition defined along with Warning Threshold value, then a notification is sent to the user.
    Critical ThresholdIf the metric value satisfies the condition defined along with Critical Threshold value, then a notification is sent to the user.
    AlertThe alert value can be set to either Yes or No. If it is Yes, then an alert message is sent to the user.

    Metrics

    ciscoironport.fan.rpm

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.15497.1.1.1.10.1.2
    ExpressionNULL
    DescriptionMonitors the fan speed in RPMs. [OIDs: 1.3.6.1.4.1.15497.1.1.1.10.1.3, 1.3.6.1.4.1.15497.1.1.1.10.1.2]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameCisco IronPort FAN Speed
    Unitrpm

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency101 – 1440 (mins)
    FilterNULLNot Applicable
    Warning OperatorLESS_THAN_EQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold20000 - 4294967295
    Warning Repeat Count11-12
    Critical OperatorLESS_THAN_EQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold15000 - 4294967295
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    ciscoironport.diskio.utilization

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.15497.1.1.1.3.0
    ExpressionNULL
    DescriptionMonitors the utilization of the disk I/O in percentage. [OID: 1.3.6.1.4.1.15497.1.1.1.3.0]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameCisco IronPort Performance
    Unit%

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency51 – 1440 (mins)
    Filter
    Warning OperatorGREATER_THAN_EQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold750-100
    Warning Repeat Count11-12
    Critical OperatorGREATER_THAN_EQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold800-100
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    ciscoironport.memory.utilization

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.15497.1.1.1.1.0
    ExpressionNULL
    DescriptionMonitors the utilization of system memory in percentage. [OID: 1.3.6.1.4.1.15497.1.1.1.1.0]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameCisco IronPort Performance
    Unit%

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency51 – 1440 (mins)
    Filter
    Warning OperatorGREATER_THAN_EQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold850-100
    Warning Repeat Count11-12
    Critical OperatorGREATER_THAN_EQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold900-100
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    ciscoironport.cpu.utilization

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.15497.1.1.1.2.0
    ExpressionNULL
    DescriptionMonitors the CPU utilization in percentage. [OID: 1.3.6.1.4.1.15497.1.1.1.2.0]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameCisco IronPort Performance
    Unit%

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency51 – 1440 (mins)
    Filter
    Warning OperatorGREATER_THAN_EQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold750-100
    Warning Repeat Count21-12
    Critical OperatorGREATER_THAN_EQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold800-100
    Critical Repeat Count21-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    ciscoironport.powersupply.status

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.15497.1.1.1.8.1.2
    ExpressionNULL
    DescriptionMonitors the current status of the power supply. Possible status values are 1- powerSupplyNotInstalled, 2- powerSupplyHealthy, 3- powerSupplyNoAC, 4- powerSupplyFaulty. [OIDs: 1.3.6.1.4.1.15497.1.1.1.8.1.4, 1.3.6.1.4.1.15497.1.1.1.8.1.2]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameCisco IronPort Power Supply
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency101 – 1440 (mins)
    FilterNULLNot Applicable
    Warning OperatorEQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold31-4
    Warning Repeat Count11-12
    Critical OperatorEQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold41-4
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)NoYes/No

    Sample Output

    No graph

    ciscoironport.raid.lasterror

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.15497.1.1.1.18.1.4
    ExpressionNULL
    DescriptionMonitors the last RAID error. [OIDs: 1.3.6.1.4.1.15497.1.1.1.18.1.3, 1.3.6.1.4.1.15497.1.1.1.18.1.4]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameCisco Ironport RAID
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency101 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical OperatorNOT_INSEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical ThresholdNo Errors,ACTIVE,0
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)NoYes/No

    Sample Output

    No graph

    ciscoironport.raid.state

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.15497.1.1.1.18.1.2
    ExpressionNULL
    DescriptionMonitors the status reported by RAID controller. Possible values are 1- driveHealthy, 2- driveFailure, 3- driveRebuild. [OIDs: 1.3.6.1.4.1.15497.1.1.1.18.1.3, 1.3.6.1.4.1.15497.1.1.1.18.1.2]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameCisco Ironport RAID
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency101 – 1440 (mins)
    FilterNULLNot Applicable
    Warning OperatorEQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold31-3
    Warning Repeat Count11-12
    Critical OperatorEQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold21-3
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    ciscoironport.sensor.temperature

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.15497.1.1.1.9.1.2
    ExpressionNULL
    DescriptionMonitors the temperature in degrees Celsius. [OIDs: 1.3.6.1.4.1.15497.1.1.1.9.1.3, 1.3.6.1.4.1.15497.1.1.1.9.1.2]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameCisco IronPort Temperature
    UnitC

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency101 – 1440 (mins)
    FilterNULLNot Applicable
    Warning OperatorGREATER_THAN_EQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold450-2147483647
    Warning Repeat Count11-12
    Critical OperatorGREATER_THAN_EQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold500-2147483647
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph