Description
It monitors Cisco QoS ClassMap Statistics like Pre Policy Bitrate per second, Traffic sent after QoS processing, Dropped Packets count and Traffic dropped as a result of QoS processing.
Prerequisites
SNMP should be enabled in end device and device should support CISCO-CLASS-BASED-QOS-MIB and SNMP credentials should be attached against the device in portal.
How to Apply: This template will ask user for 2 input parameters while assigning it to a device —
- QoS Class name
Default value: ALL → i.e. check above metrics for all QoS classes
Input Format: ClassName1,ClassName2,ClassName3
Sample input1: class-default,COS1,COS2,COS3 → i.e. check above metrics for listed QoS classes
Sample input2: ICICI_class_AF1,ICICI_class_EF,class-default → i.e. check above metrics for listed QoS classes
Sample input3: class-default → i.e. check above metrics for QoS class-default
Sample input4: ALL → i.e. check above metrics for all QoS classes
- OID Counter type
Possible values:
- 32bit → It will use 32 bit counter OIDs to evaluate above metric results
- 64bit → It will use 64 bit counter OIDs to evaluate above metric results
Metric Parameters
| Parameter | Description |
|---|---|
| Frequency | Warning Threshold | If the metric value satisfies the condition defined along with Warning Threshold value, then a notification is sent to the user. |
| Critical Threshold | If the metric value satisfies the condition defined along with Critical Threshold value, then a notification is sent to the user. |
| Alert | The alert value can be set to either Yes or No. If it is Yes, then an alert message is sent to the user. |
Metrics
cisco.qos.classmap.pre.policy.rate
Metric Details
| Applicable for | Device |
| SNMP OID | NULL |
| Expression | NULL |
| Description | It monitors QoS Class map inbound octets prior to executing any QoS policies. It counts the inbound octets and evaluates bit rate(bits per second). [CISCO-CLASS-BASED-QOS-MIB::1.3.6.1.4.1.9.9.166.1.15.1.1.5 or 1.3.6.1.4.1.9.9.166.1.15.1.1.6] |
| Category | SNMP Extended |
| Collector Type | Gateway |
| Monitor Name | Cisco QoS ClassMap Statistics |
| Unit | bps |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 5 | 1 – 1440 (mins) |
| Filter | ||
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | ||
| Critical Threshold | ||
| Critical Repeat Count | ||
| Alert | No | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
cisco.qos.classmap.post.policy.rate
Metric Details
| Applicable for | Device |
| SNMP OID | NULL |
| Expression | NULL |
| Description | It monitors QoS Class map outbound octets after executing QoS policies. It counts the outbound octets and evaluates bit rate(bits per second). [CISCO-CLASS-BASED-QOS-MIB::1.3.6.1.4.1.9.9.166.1.15.1.1.9 or 1.3.6.1.4.1.9.9.166.1.15.1.1.10] |
| Category | SNMP Extended |
| Collector Type | Gateway |
| Monitor Name | Cisco QoS ClassMap Statistics |
| Unit | bps |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 5 | 1 – 1440 (mins) |
| Filter | ||
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | ||
| Critical Threshold | ||
| Critical Repeat Count | ||
| Alert | No | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
cisco.qos.classmap.drop.packets.count
Metric Details
| Applicable for | Device |
| SNMP OID | NULL |
| Expression | NULL |
| Description | It monitors QoS Class map dropped packets per class as the result of all features that can produce drops (e.g., police, random detect, etc.). It evaluates the metric value by subtracting previous monitoring poll value from current monitoring poll value [i.e Current_Poll_Drop_Packets - Prev_Poll_Drop_Packets]. [CISCO-CLASS-BASED-QOS-MIB::1.3.6.1.4.1.9.9.166.1.15.1.1.13 or 1.3.6.1.4.1.9.9.166.1.15.1.1.14] |
| Category | SNMP Extended |
| Collector Type | Gateway |
| Monitor Name | Cisco QoS ClassMap Statistics |
| Unit |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 5 | 1 – 1440 (mins) |
| Filter | ||
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | ||
| Critical Threshold | ||
| Critical Repeat Count | ||
| Alert | No | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
cisco.qos.classmap.drop.rate
Metric Details
| Applicable for | Device |
| SNMP OID | NULL |
| Expression | NULL |
| Description | It monitors QoS Class map dropped bytes per class as the result of all features that can produce drops (e.g., police, random detect, etc.). Traffic dropped as a result of QoS processing. It counts the dropped bytes in the monitoring period and evaluates metric value in bps (bits per second). [CISCO-CLASS-BASED-QOS-MIB::1.3.6.1.4.1.9.9.166.1.15.1.1.16 or 1.3.6.1.4.1.9.9.166.1.15.1.1.17] |
| Category | SNMP Extended |
| Collector Type | Gateway |
| Monitor Name | Cisco QoS ClassMap Statistics |
| Unit | bps |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 5 | 1 – 1440 (mins) |
| Filter | ||
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | ||
| Critical Threshold | ||
| Critical Repeat Count | ||
| Alert | No | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph