Description
Monitors runtime status for chassis, modules, ports, alarms etc.
Prerequisites
SNMP should be enabled in end device and device should support CISCO-STACK-MIB OIDs and SNMP credentials should be attached against the device in portal.
How to Apply: This template is All instance selection based. It will not ask user to select any instance (s) while assigning it to a device.
Metric Parameters
Parameter | Description |
---|---|
Frequency | |
Warning Threshold | If the metric value satisfies the condition defined along with Warning Threshold value, then a notification is sent to the user. |
Critical Threshold | If the metric value satisfies the condition defined along with Critical Threshold value, then a notification is sent to the user. |
Alert | The alert value can be set to either Yes or No. If it is Yes, then an alert message is sent to the user. |
Metrics
cisco.stack.minor.alarm
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.9.5.1.2.11.0 |
Expression | NULL |
Description | The chassis minor alarm status. Possible values for this monitor (1: off, 2: on). [OID: 1.3.6.1.4.1.9.5.1.2.11.0] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Cisco Stack Switch Chassis Monitors |
Unit |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | 1 – 1440 (mins) |
Filter | ||
Warning Operator | EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Warning Threshold | 2 | 1-2 |
Warning Repeat Count | 1 | 1-12 |
Critical Operator | ||
Critical Threshold | ||
Critical Repeat Count | ||
Alert | Yes | Yes/No |
Graph (Yes/No) | No | Yes/No |
Sample Output
No graph
cisco.stack.major.alarm
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.9.5.1.2.12.0 |
Expression | NULL |
Description | The chassis major alarm status. Possible values for this monitor (1: off, 2: on). [OID: 1.3.6.1.4.1.9.5.1.2.12.0] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Cisco Stack Switch Chassis Monitors |
Unit |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | 1 – 1440 (mins) |
Filter | ||
Warning Operator | ||
Warning Threshold | ||
Warning Repeat Count | ||
Critical Operator | EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 2 | 1-2 |
Critical Repeat Count | 1 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | No | Yes/No |
Sample Output
No graph
cisco.stack.temp.alarm
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.9.5.1.2.13.0 |
Expression | NULL |
Description | The chassis temperature alarm status. Possible values for this monitor (1: off, 2: on, 3: critical). [OID: 1.3.6.1.4.1.9.5.1.2.13.0] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Cisco Stack Switch Chassis Monitors |
Unit |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | 1 – 1440 (mins) |
Filter | ||
Warning Operator | EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Warning Threshold | 2 | 1-3 |
Warning Repeat Count | 1 | 1-12 |
Critical Operator | EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 3 | 1-3 |
Critical Repeat Count | 1 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | No | Yes/No |
Sample Output
No graph
cisco.stack.chassis.ps1.status
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.9.5.1.2.4.0 |
Expression | NULL |
Description | Status of power supply number 1. Possible values for this monitor (1: other, 2: ok, 3: minorFault, 4: majorFault). [OID: 1.3.6.1.4.1.9.5.1.2.4.0] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Cisco Stack Switch Chassis Ps1 Status |
Unit |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | 1 – 1440 (mins) |
Filter | ||
Warning Operator | EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Warning Threshold | 3 | 1-4 |
Warning Repeat Count | 1 | 1-12 |
Critical Operator | EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 4 | 1-4 |
Critical Repeat Count | 1 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | No | Yes/No |
Sample Output
No graph
cisco.stack.chassis.ps2.status
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.9.5.1.2.7.0 |
Expression | NULL |
Description | Status of power supply number 2. Possible values for this monitor (1: other, 2: ok, 3: minorFault, 4: majorFault). [OID: 1.3.6.1.4.1.9.5.1.2.7.0] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Cisco Stack Switch Chassis Ps2 Status |
Unit |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | 1 – 1440 (mins) |
Filter | ||
Warning Operator | EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Warning Threshold | 3 | 1-4 |
Warning Repeat Count | 1 | 1-12 |
Critical Operator | EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 4 | 1-4 |
Critical Repeat Count | 1 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | No | Yes/No |
Sample Output
No graph
cisco.stack.chassis.ps3.status
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.9.5.1.2.21.0 |
Expression | NULL |
Description | Status of power supply number 3. Possible values for this monitor (1: other, 2: ok, 3: minorFault, 4: majorFault). This object is only supported by systems that can have 3 or more power supplies. [OID: 1.3.6.1.4.1.9.5.1.2.21.0] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Cisco Stack Switch Chassis Ps3 Status |
Unit |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | 1 – 1440 (mins) |
Filter | ||
Warning Operator | EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Warning Threshold | 3 | 1-4 |
Warning Repeat Count | 1 | 1-12 |
Critical Operator | EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 4 | 1-4 |
Critical Repeat Count | 1 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | No | Yes/No |
Sample Output
No graph
cisco.stack.chassis.fan.status
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.9.5.1.2.9.0 |
Expression | NULL |
Description | Status of the chassis fan. Possible values for this monitor (1: other, 2: ok, 3: minorFault, 4: majorFault). [OID: 1.3.6.1.4.1.9.5.1.2.9.0] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Cisco Stack Switch Fan Status |
Unit |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | 1 – 1440 (mins) |
Filter | ||
Warning Operator | EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Warning Threshold | 3 | 1-4 |
Warning Repeat Count | 1 | 1-12 |
Critical Operator | EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 4 | 1-4 |
Critical Repeat Count | 1 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | No | Yes/No |
Sample Output
No graph
cisco.stack.ha.status
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.9.5.1.1.60.0, 1.3.6.1.4.1.9.5.1.1.61.0 |
Expression | sysHighAvailabilityOperStatus |
Description | Indicates the operational status of High System Availability feature. Possible values for this monitor (1: running, 2: notRunning). [OIDs: 1.3.6.1.4.1.9.5.1.1.60, 1.3.6.1.4.1.9.5.1.1.61] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Cisco Stack Switch HA Status |
Unit |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | 1 – 1440 (mins) |
Filter | ||
Warning Operator | ||
Warning Threshold | ||
Warning Repeat Count | ||
Critical Operator | EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 2 | 1-2 |
Critical Repeat Count | 1 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | No | Yes/No |
Sample Output
No graph
cisco.stack.module.status
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.9.5.1.3.1.1.10 |
Expression | NULL |
Description | The operational status of the module. Possible values for this monitor (1: other, 2: ok, 3: minorFault, 4: majorFault). [OIDs: 1.3.6.1.4.1.9.5.1.3.1.1.10, 1.3.6.1.4.1.9.5.1.3.1.1.13] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Cisco Stack Switch Module Status |
Unit |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | 1 – 1440 (mins) |
Filter | NULL | Not Applicable |
Warning Operator | EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Warning Threshold | 3 | 1-4 |
Warning Repeat Count | 1 | 1-12 |
Critical Operator | EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 4 | 1-4 |
Critical Repeat Count | 1 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | No | Yes/No |
Sample Output
No graph
cisco.stack.status
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.9.5.1.1.67.0 |
Expression | NULL |
Description | The operational status of the system. Possible values for this monitor (1: other, 2: ok, 3: minorFault, 4: majorFault). [OID: 1.3.6.1.4.1.9.5.1.1.67.0] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Cisco Stack Switch Operational Status |
Unit |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | 1 – 1440 (mins) |
Filter | ||
Warning Operator | EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Warning Threshold | 3 | 1-4 |
Warning Repeat Count | 1 | 1-12 |
Critical Operator | EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 4 | 1-4 |
Critical Repeat Count | 1 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | No | Yes/No |
Sample Output
No graph
cisco.stack.port.oper.status
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.9.5.1.4.1.1.6 |
Expression | NULL |
Description | The current operational status of the port. Possible values for this monitor (1: other, 2: ok, 3: minorFault, 4: majorFault). [OID: 1.3.6.1.4.1.9.5.1.4.1.1.6] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Cisco Stack Switch Port Oper Status |
Unit |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | 1 – 1440 (mins) |
Filter | NULL | Not Applicable |
Warning Operator | EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Warning Threshold | 3 | 1-4 |
Warning Repeat Count | 1 | 1-12 |
Critical Operator | EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 4 | 1-4 |
Critical Repeat Count | 1 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output