Description
Monitors Cisco parameters like average utilization of memory, average utilization of CPU on the active supervisor and uptime since the entire system was last re-initialized. [CISCO-SYSTEM-EXT-MIB] - cseSysCPUUtilization(1.3.6.1.4.1.9.9.305.1.1.1.0); [CISCO-SYSTEM-EXT-MIB] - cseSysMemoryUtilization(1.3.6.1.4.1.9.9.305.1.1.2.0); [CISCO-SYSTEM-EXT-MIB] - cseSysUpTime(1.3.6.1.4.1.9.9.305.1.1.10).
Prerequisites
SNMP should be enabled in end device and device should support CISCO-SYSTEM-EXT-MIB OIDs and SNMP credentials should be attached against the device in portal.
Metric Parameters
Parameter | Description |
---|---|
Frequency | |
Warning Threshold | If the metric value satisfies the condition defined along with Warning Threshold value, then a notification is sent to the user. |
Critical Threshold | If the metric value satisfies the condition defined along with Critical Threshold value, then a notification is sent to the user. |
Alert | The alert value can be set to either Yes or No. If it is Yes, then an alert message is sent to the user. |
Metrics
nexus.cpu.utilization
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.9.9.305.1.1.1.0 |
Expression | NULL |
Description | The average utilization of CPU on the active supervisor. [OID - 1.3.6.1.4.1.9.9.305.1.1.1] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Cisco System Performance - CISCO-SYSTEM-EXT-MIB |
Unit | % |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 5 | 1 – 1440 (mins) |
Filter | ||
Warning Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Warning Threshold | 85 | 0-100 |
Warning Repeat Count | 2 | 1-12 |
Critical Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 90 | 0-100 |
Critical Repeat Count | 2 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
nexus.memory.utilization
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.9.9.305.1.1.2.0 |
Expression | NULL |
Description | The average utilization of memory on the active supervisor. [OID - 1.3.6.1.4.1.9.9.305.1.1.2.0] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Cisco System Performance - CISCO-SYSTEM-EXT-MIB |
Unit | % |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 5 | 1 – 1440 (mins) |
Filter | ||
Warning Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Warning Threshold | 85 | 0-100 |
Warning Repeat Count | 2 | 1-12 |
Critical Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 90 | 0-100 |
Critical Repeat Count | 2 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
system.uptime
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.9.9.305.1.1.10.0 |
Expression | NULL |
Description | The time (in seconds) since the entire system was last re-initialized as a result of reload. [CISCO-SYSTEM-EXT-MIB] - cseSysUpTime(1.3.6.1.4.1.9.9.305.1.1.10) |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Cisco System Performance - CISCO-SYSTEM-EXT-MIB |
Unit | s |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 5 | 1 – 1440 (mins) |
Filter | ||
Warning Operator | ||
Warning Threshold | ||
Warning Repeat Count | ||
Critical Operator | LESS_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 1800 | 0 - 4294967295 |
Critical Repeat Count | 1 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph