Description

Applicable on the Cisco UCS Standalone C-Series servers. Monitors the operational status of fan, power, storage, raid battery, chassis and memory . Tested on Cisco C-200 server.

Prerequisites

SNMP should be enabled in end device and device should support CISCO-UNIFIED-COMPUTING-EQUIPMENT-MIB, CISCO-UNIFIED-COMPUTING-STORAGE-MIB, CISCO-UNIFIED-COMPUTING-PROCESSOR-MIB, CISCO-UNIFIED-COMPUTING-MEMORY-MIB OIDs and SNMP credentials should be attached against the device in portal.

How to Apply: This template is All instance selection based. It will not ask user to select any instance (s) while assigning it to a device.

Metric Parameters

Metric Parameters
ParameterDescription
Frequency
  • Frequency is the interval in which you want to probe and collect metric data from the target device/resource
  • Frequency is defined in minutes (min).
  • Warning ThresholdIf the metric value satisfies the condition defined along with Warning Threshold value, then a notification is sent to the user.
    Critical ThresholdIf the metric value satisfies the condition defined along with Critical Threshold value, then a notification is sent to the user.
    AlertThe alert value can be set to either Yes or No. If it is Yes, then an alert message is sent to the user.

    Metrics

    ucs.chassis.status

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.9.9.719.1.15.7.1.27, 1.3.6.1.4.1.9.9.719.1.15.7.1.4
    Expressionif (cucsEquipmentChassisAdminState == 1 || cucsEquipmentChassisAdminState == 2 || cucsEquipmentChassisAdminState == 5 || cucsEquipmentChassisAdminState == 7,cucsEquipmentChassisOperState,-1)
    DescriptionProvides the Cisco UCS equipment chassis distinguished name (DN), admin state and the operational status. Possible admin states are 1- Acknowledged, 2- Re Acknowledge , 3- Decommission, 4- Remove, 5- Enable Port Channel, 6- Disable Port Channel, 7- Auto Acknowledge. Possible equipment chassis operational states are 0- Unknown, 1- Operable, 2- Inoperable, 3- Degraded, 4- Powered Off, 5- Power Problem, 6- Removed, 7-Voltage Problem, 8- Thermal Problem, 9- Performance Problem, 10- Accessibility Problem, 11- Identity Unestablishable, 12- Bios Post Timeout, 13- Disabled, 14- Malformed Fru, 51- Fabric Connection Problem, 52- Fabric Unsupported Connection, 81- Config, 82- Equipment Problem, 83- Decomissioning, 84- Chassis Limit Exceeded, 100- Not Supported, 101- Discovery, 102- Discovery Failed, 103- Identify, 104- Post Failure, 105- Upgrade Problem, 106- Peer Communication Problem, 107- Auto Upgrade, 108- Link Activate Blocked.
    [OIDs: 1.3.6.1.4.1.9.9.719.1.15.7.1.2, 1.3.6.1.4.1.9.9.719.1.15.7.1.4, 1.3.6.1.4.1.9.9.719.1.15.7.1.27]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameCisco UCS Chassis Status
    UnitNone

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency101 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical OperatorNOT_IN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold0,1,13,81,100,101,103,107,-10, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 51, 52, 81, 82, 83, 84, 100, 101, 102, 103, 104, 105, 106, 107, 108, -1
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)NoYes/No

    Sample Output

    No graph

    ucs.fan.module.status

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.9.9.719.1.15.13.1.7
    ExpressionNULL
    DescriptionProvides the Cisco UCS equipment fan module distinguished name (DN) and the operational status. Possible equipment fan module operational states are 0- Unknown, 1- Operable, 2- Inoperable, 3- Degraded, 4- Powered Off, 5- Power Problem, 6- Removed, 7-Voltage Problem, 8- Thermal Problem, 9- Performance Problem, 10- Accessibility Problem, 11- Identity Unestablishable, 12- Bios Post Timeout, 13- Disabled, 14- Malformed Fru, 51- Fabric Connection Problem, 52- Fabric Unsupported Connection, 81- Config, 82- Equipment Problem, 83- Decomissioning, 84- Chassis Limit Exceeded, 100- Not Supported, 101- Discovery, 102- Discovery Failed, 103- Identify, 104- Post Failure, 105- Upgrade Problem, 106- Peer Communication Problem, 107- Auto Upgrade, 108- Link Activate Blocked. [OIDs: 1.3.6.1.4.1.9.9.719.1.15.13.1.2, 1.3.6.1.4.1.9.9.719.1.15.13.1.7]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameCisco UCS Fan Module Status
    UnitNone

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency101 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical OperatorNOT_IN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold0,1,13,81,100,101,103,1070, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 51, 52, 81, 82, 83, 84, 100, 101, 102, 103, 104, 105, 106, 107, 108
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)NoYes/No

    Sample Output

    No graph

    ucs.fan.status

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.9.9.719.1.15.12.1.9
    ExpressionNULL
    DescriptionProvides the Cisco UCS equipment fan distinguished name (DN) and the operational status. Possible equipment fan operational states are 0- Unknown, 1- Operable, 2- Inoperable, 3- Degraded, 4- Powered Off, 5- Power Problem, 6- Removed, 7-Voltage Problem, 8- Thermal Problem, 9- Performance Problem, 10- Accessibility Problem, 11- Identity Unestablishable, 12- Bios Post Timeout, 13- Disabled, 14- Malformed Fru, 51- Fabric Connection Problem, 52- Fabric Unsupported Connection, 81- Config, 82- Equipment Problem, 83- Decomissioning, 84- Chassis Limit Exceeded, 100- Not Supported, 101- Discovery, 102- Discovery Failed, 103- Identify, 104- Post Failure, 105- Upgrade Problem, 106- Peer Communication Problem, 107- Auto Upgrade, 108- Link Activate Blocked. [OIDs: 1.3.6.1.4.1.9.9.719.1.15.12.1.2, 1.3.6.1.4.1.9.9.719.1.15.12.1.9]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameCisco UCS Fan Status
    UnitNone

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency101 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical OperatorNOT_IN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold0,1,13,81,100,101,103,1070, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 51, 52, 81, 82, 83, 84, 100, 101, 102, 103, 104, 105, 106, 107, 108
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)NoYes/No

    Sample Output

    No graph

    ucs.fabric.extender.status

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.9.9.719.1.15.19.1.5, 1.3.6.1.4.1.9.9.719.1.15.19.1.21
    Expressionif (cucsEquipmentFexAdminState == 1 || cucsEquipmentFexAdminState == 2 || cucsEquipmentFexAdminState == 5 || cucsEquipmentFexAdminState == 7,cucsEquipmentFexOperState,-1)
    DescriptionProvides the Cisco UCS equipment Fabric Extender (FEX) distinguished name (DN), admin state and the operational status. Possible admin states are 1- Acknowledged, 2- Re Acknowledge , 3- Decommission, 4- Remove, 5- Enable Port Channel, 6- Disable Port Channel, 7- Auto Acknowledge. Possible equipment fex operational states are 0- Unknown, 1- Operable, 2- Inoperable, 3- Degraded, 4- Powered Off, 5- Power Problem, 6- Removed, 7-Voltage Problem, 8- Thermal Problem, 9- Performance Problem, 10- Accessibility Problem, 11- Identity Unestablishable, 12- Bios Post Timeout, 13- Disabled, 14- Malformed Fru, 51- Fabric Connection Problem, 52- Fabric Unsupported Connection, 81- Config, 82- Equipment Problem, 83- Decomissioning, 84- Chassis Limit Exceeded, 100- Not Supported, 101- Discovery, 102- Discovery Failed, 103- Identify, 104- Post Failure, 105- Upgrade Problem, 106- Peer Communication Problem, 107- Auto Upgrade, 108- Link Activate Blocked. [OIDs: 1.3.6.1.4.1.9.9.719.1.15.19.1.2, 1.3.6.1.4.1.9.9.719.1.15.19.1.5, 1.3.6.1.4.1.9.9.719.1.15.19.1.21]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameCisco UCS FEX Status
    UnitNone

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency101 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical OperatorNOT_IN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold0,1,13,81,100,101,103,107,-10, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 51, 52, 81, 82, 83, 84, 100, 101, 102, 103, 104, 105, 106, 107, 108, -1
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)NoYes/No

    Sample Output

    No graph

    ucs.iocard.status

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.9.9.719.1.15.30.1.25
    ExpressionNULL
    DescriptionProvides the Cisco UCS equipment IOCard distinguished name (DN) and the operational status. Possible equipment IOCard operational states are 0- Unknown, 1- Operable, 2- Inoperable, 3- Degraded, 4- Powered Off, 5- Power Problem, 6- Removed, 7-Voltage Problem, 8- Thermal Problem, 9- Performance Problem, 10- Accessibility Problem, 11- Identity Unestablishable, 12- Bios Post Timeout, 13- Disabled, 14- Malformed Fru, 51- Fabric Connection Problem, 52- Fabric Unsupported Connection, 81- Config, 82- Equipment Problem, 83- Decomissioning, 84- Chassis Limit Exceeded, 100- Not Supported, 101- Discovery, 102- Discovery Failed, 103- Identify, 104- Post Failure, 105- Upgrade Problem, 106- Peer Communication Problem, 107- Auto Upgrade, 108- Link Activate Blocked. [OIDs: 1.3.6.1.4.1.9.9.719.1.15.30.1.2, 1.3.6.1.4.1.9.9.719.1.15.30.1.25]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameCisco UCS IO Card Status
    UnitNone

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency101 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical OperatorNOT_IN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold0,1,13,81,100,101,103,1070, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 51, 52, 81, 82, 83, 84, 100, 101, 102, 103, 104, 105, 106, 107, 108
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)NoYes/No

    Sample Output

    No graph

    ucs.memory.array.status

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.9.9.719.1.30.1.1.11
    ExpressionNULL
    DescriptionProvides the Cisco UCS memory array distinguished name (DN) and the operational status. Possible memory array operational states are 0- Unknown, 1- Operable, 2- Inoperable, 3- Degraded, 4- Powered Off, 5- Power Problem, 6- Removed, 7-Voltage Problem, 8- Thermal Problem, 9- Performance Problem, 10- Accessibility Problem, 11- Identity Unestablishable, 12- Bios Post Timeout, 13- Disabled, 14- Malformed Fru, 51- Fabric Connection Problem, 52- Fabric Unsupported Connection, 81- Config, 82- Equipment Problem, 83- Decomissioning, 84- Chassis Limit Exceeded, 100- Not Supported, 101- Discovery, 102- Discovery Failed, 103- Identify, 104- Post Failure, 105- Upgrade Problem, 106- Peer Communication Problem, 107- Auto Upgrade, 108- Link Activate Blocked. [OIDs: 1.3.6.1.4.1.9.9.719.1.30.1.1.2, 1.3.6.1.4.1.9.9.719.1.30.1.1.11]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameCisco UCS Memory Array Status
    UnitNone

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency101 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical OperatorNOT_IN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold0,1,13,81,100,101,103,1070, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 51, 52, 81, 82, 83, 84, 100, 101, 102, 103, 104, 105, 106, 107, 108
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)NoYes/No

    Sample Output

    No graph

    ucs.memory.buffer.unit.status

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.9.9.719.1.30.4.1.6
    ExpressionNULL
    DescriptionProvides the Cisco UCS memory buffer unit distinguished name (DN) and the operational status. Possible memory buffer unit operational states are 0- Unknown, 1- Operable, 2- Inoperable, 3- Degraded, 4- Powered Off, 5- Power Problem, 6- Removed, 7-Voltage Problem, 8- Thermal Problem, 9- Performance Problem, 10- Accessibility Problem, 11- Identity Unestablishable, 12- Bios Post Timeout, 13- Disabled, 14- Malformed Fru, 51- Fabric Connection Problem, 52- Fabric Unsupported Connection, 81- Config, 82- Equipment Problem, 83- Decomissioning, 84- Chassis Limit Exceeded, 100- Not Supported, 101- Discovery, 102- Discovery Failed, 103- Identify, 104- Post Failure, 105- Upgrade Problem, 106- Peer Communication Problem, 107- Auto Upgrade, 108- Link Activate Blocked. [OIDs: 1.3.6.1.4.1.9.9.719.1.30.4.1.2, 1.3.6.1.4.1.9.9.719.1.30.4.1.6]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameCisco UCS Memory Buffer Unit Status
    UnitNone

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency101 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical OperatorNOT_IN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold0,1,13,81,100,101,103,1070, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 51, 52, 81, 82, 83, 84, 100, 101, 102, 103, 104, 105, 106, 107, 108
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)NoYes/No

    Sample Output

    No graph

    ucs.memory.unitstatus

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.9.9.719.1.30.11.1.13
    ExpressionNULL
    DescriptionProvides the Cisco UCS memory unit distinguished name (DN) and the operational status. Possible memory unit operational states are 0- Unknown, 1- Operable, 2- Inoperable, 3- Degraded, 4- Powered Off, 5- Power Problem, 6- Removed, 7-Voltage Problem, 8- Thermal Problem, 9- Performance Problem, 10- Accessibility Problem, 11- Identity Unestablishable, 12- Bios Post Timeout, 13- Disabled, 14- Malformed Fru, 51- Fabric Connection Problem, 52- Fabric Unsupported Connection, 81- Config, 82- Equipment Problem, 83- Decomissioning, 84- Chassis Limit Exceeded, 100- Not Supported, 101- Discovery, 102- Discovery Failed, 103- Identify, 104- Post Failure, 105- Upgrade Problem, 106- Peer Communication Problem, 107- Auto Upgrade, 108- Link Activate Blocked. [OIDs: 1.3.6.1.4.1.9.9.719.1.30.11.1.2, 1.3.6.1.4.1.9.9.719.1.30.11.1.13]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameCisco UCS Memory Unit Status
    UnitNone

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency101 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical OperatorNOT_IN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold0,1,13,81,100,101,103,1070, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 51, 52, 81, 82, 83, 84, 100, 101, 102, 103, 104, 105, 106, 107, 108
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)NoYes/No

    Sample Output

    No graph

    ucs.processor.unit.status

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.9.9.719.1.41.9.1.9
    ExpressionNULL
    DescriptionProvides the Cisco UCS processor unit distinguished name (DN) and the operational status. Possible processor unit operational states are 0- Unknown, 1- Operable, 2- Inoperable, 3- Degraded, 4- Powered Off, 5- Power Problem, 6- Removed, 7-Voltage Problem, 8- Thermal Problem, 9- Performance Problem, 10- Accessibility Problem, 11- Identity Unestablishable, 12- Bios Post Timeout, 13- Disabled, 14- Malformed Fru, 51- Fabric Connection Problem, 52- Fabric Unsupported Connection, 81- Config, 82- Equipment Problem, 83- Decomissioning, 84- Chassis Limit Exceeded, 100- Not Supported, 101- Discovery, 102- Discovery Failed, 103- Identify, 104- Post Failure, 105- Upgrade Problem, 106- Peer Communication Problem, 107- Auto Upgrade, 108- Link Activate Blocked. [OIDs: 1.3.6.1.4.1.9.9.719.1.41.9.1.2, 1.3.6.1.4.1.9.9.719.1.41.9.1.9]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameCisco UCS Processor Unit Status
    UnitNone

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency101 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical OperatorNOT_IN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold0,1,13,81,100,101,103,1070, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 51, 52, 81, 82, 83, 84, 100, 101, 102, 103, 104, 105, 106, 107, 108
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)NoYes/No

    Sample Output

    No graph

    ucs.power.supply.unit.status

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.9.9.719.1.15.56.1.7
    ExpressionNULL
    DescriptionProvides the Cisco UCS equipment Power Supply Unit (PSU) distinguished name (DN) and the operational status. Possible equipment PSU operational states are 0- Unknown, 1- Operable, 2- Inoperable, 3- Degraded, 4- Powered Off, 5- Power Problem, 6- Removed, 7-Voltage Problem, 8- Thermal Problem, 9- Performance Problem, 10- Accessibility Problem, 11- Identity Unestablishable, 12- Bios Post Timeout, 13- Disabled, 14- Malformed Fru, 51- Fabric Connection Problem, 52- Fabric Unsupported Connection, 81- Config, 82- Equipment Problem, 83- Decomissioning, 84- Chassis Limit Exceeded, 100- Not Supported, 101- Discovery, 102- Discovery Failed, 103- Identify, 104- Post Failure, 105- Upgrade Problem, 106- Peer Communication Problem, 107- Auto Upgrade, 108- Link Activate Blocked. [OIDs: 1.3.6.1.4.1.9.9.719.1.15.56.1.2, 1.3.6.1.4.1.9.9.719.1.15.56.1.7]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameCisco UCS PSU Status
    UnitNone

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency101 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical OperatorNOT_IN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold0,1,13,81,100,101,103,1070, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 51, 52, 81, 82, 83, 84, 100, 101, 102, 103, 104, 105, 106, 107, 108
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)NoYes/No

    Sample Output

    No graph

    ucs.storage.controller.status

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.9.9.719.1.45.1.1.6
    ExpressionNULL
    DescriptionProvides the Cisco UCS storage controller distinguished name (DN) and the operational status. Possible storage controller operational states are 0- Unknown, 1- Operable, 2- Inoperable, 3- Degraded, 4- Powered Off, 5- Power Problem, 6- Removed, 7-Voltage Problem, 8- Thermal Problem, 9- Performance Problem, 10- Accessibility Problem, 11- Identity Unestablishable, 12- Bios Post Timeout, 13- Disabled, 14- Malformed Fru, 51- Fabric Connection Problem, 52- Fabric Unsupported Connection, 81- Config, 82- Equipment Problem, 83- Decomissioning, 84- Chassis Limit Exceeded, 100- Not Supported, 101- Discovery, 102- Discovery Failed, 103- Identify, 104- Post Failure, 105- Upgrade Problem, 106- Peer Communication Problem, 107- Auto Upgrade, 108- Link Activate Blocked. [OIDs: 1.3.6.1.4.1.9.9.719.1.45.1.1.2, 1.3.6.1.4.1.9.9.719.1.45.1.1.6]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameCisco UCS Storage Controller Status
    UnitNone

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency101 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical OperatorNOT_IN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold0,1,13,81,100,101,103,1070, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 51, 52, 81, 82, 83, 84, 100, 101, 102, 103, 104, 105, 106, 107, 108
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)NoYes/No

    Sample Output

    No graph

    ucs.storage.local.logical.unit.number.status

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.9.9.719.1.45.8.1.9
    ExpressionNULL
    DescriptionProvides the Cisco UCS storage local logical unit numbers (LUNs) distinguished name (DN) and the operational status. Possible storage local logical unit numbers (LUNs) operational states are 0- Unknown, 1- Operable, 2- Inoperable, 3- Degraded, 4- Powered Off, 5- Power Problem, 6- Removed, 7-Voltage Problem, 8- Thermal Problem, 9- Performance Problem, 10- Accessibility Problem, 11- Identity Unestablishable, 12- Bios Post Timeout, 13- Disabled, 14- Malformed Fru, 51- Fabric Connection Problem, 52- Fabric Unsupported Connection, 81- Config, 82- Equipment Problem, 83- Decomissioning, 84- Chassis Limit Exceeded, 100- Not Supported, 101- Discovery, 102- Discovery Failed, 103- Identify, 104- Post Failure, 105- Upgrade Problem, 106- Peer Communication Problem, 107- Auto Upgrade, 108- Link Activate Blocked. [OIDs: 1.3.6.1.4.1.9.9.719.1.45.8.1.2, 1.3.6.1.4.1.9.9.719.1.45.8.1.9]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameCisco UCS Storage Local LUNs Status
    UnitNone

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency101 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical OperatorNOT_IN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold0,1,13,81,100,101,103,1070, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 51, 52, 81, 82, 83, 84, 100, 101, 102, 103, 104, 105, 106, 107, 108
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)NoYes/No

    Sample Output

    No graph

    ucs.storage.logical.disk.slot.status

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.9.9.719.1.45.13.1.6
    ExpressionNULL
    DescriptionProvides the Cisco UCS storage logical disk slot distinguished name (DN) and the operational status. Possible storage logical disk slot operational states are 0- Unknown, 1- Operable, 2- Inoperable, 3- Degraded, 4- Powered Off, 5- Power Problem, 6- Removed, 7-Voltage Problem, 8- Thermal Problem, 9- Performance Problem, 10- Accessibility Problem, 11- Identity Unestablishable, 12- Bios Post Timeout, 13- Disabled, 14- Malformed Fru, 51- Fabric Connection Problem, 52- Fabric Unsupported Connection, 81- Config, 82- Equipment Problem, 83- Decomissioning, 84- Chassis Limit Exceeded, 100- Not Supported, 101- Discovery, 102- Discovery Failed, 103- Identify, 104- Post Failure, 105- Upgrade Problem, 106- Peer Communication Problem, 107- Auto Upgrade, 108- Link Activate Blocked. [OIDs: 1.3.6.1.4.1.9.9.719.1.45.13.1.2, 1.3.6.1.4.1.9.9.719.1.45.13.1.6]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameCisco UCS Storage Logical Disk Slot Status
    UnitNone

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency101 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical OperatorNOT_IN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold0,1,13,81,100,101,103,1070, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 51, 52, 81, 82, 83, 84, 100, 101, 102, 103, 104, 105, 106, 107, 108
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)NoYes/No

    Sample Output

    No graph

    ucs.storage.logical.disk.status

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.9.9.719.1.45.4.1.9
    ExpressionNULL
    DescriptionProvides the Cisco UCS storage logical disk distinguished name (DN) and the operational status. Possible storage logical disk operational states are 0-Unknown, 1- Operable, 2- Inoperable, 3- Degraded, 4- Powered Off, 5- Power Problem, 6- Removed, 7- Voltage Problem, 8- Thermal Problem, 9- Performance Problem, 10- Accessibility Problem, 11- Identity Unestablishable, 12- Bios Post Timeout, 13- Disabled, 14- Malformed FRU, 51- Fabric Connection Problem, 52- Fabric Unsupported Connection, 81- Config, 82- Equipment Problem, 83- Decomissioning, 84- Chassis Limit Exceeded, 100- Not Supported, 101- Discovery, 102- Discovery Failed, 103- Identify, 104- Post Failure, 105- Upgrade Problem, 106- Peer Communication Problem, 107- Auto upgrade, 108- Link Activate Blocked. [OIDs: 1.3.6.1.4.1.9.9.719.1.45.4.1.2, 1.3.6.1.4.1.9.9.719.1.45.4.1.9]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameCisco UCS Storage Logical Disk Status
    UnitNone

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency101 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical OperatorNOT_IN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold0,1,2,13,81,100,101,103,1070, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 51, 52, 81, 82, 83, 84, 100, 101, 102, 103, 104, 105, 106, 107, 108
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)NoYes/No

    Sample Output

    No graph

    ucs.storage.raid.battery.status

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.9.9.719.1.45.11.1.9
    ExpressionNULL
    DescriptionProvides the Cisco UCS storage raid battery distinguished name (DN) and the operational status. Possible storage raid battery operational states are 0- Unknown, 1- Operable, 2- Inoperable, 3- Degraded, 4- Powered Off, 5- Power Problem, 6- Removed, 7-Voltage Problem, 8- Thermal Problem, 9- Performance Problem, 10- Accessibility Problem, 11- Identity Unestablishable, 12- Bios Post Timeout, 13- Disabled, 14- Malformed Fru, 51- Fabric Connection Problem, 52- Fabric Unsupported Connection, 81- Config, 82- Equipment Problem, 83- Decomissioning, 84- Chassis Limit Exceeded, 100- Not Supported, 101- Discovery, 102- Discovery Failed, 103- Identify, 104- Post Failure, 105- Upgrade Problem, 106- Peer Communication Problem, 107- Auto Upgrade, 108- Link Activate Blocked. [OIDs: 1.3.6.1.4.1.9.9.719.1.45.11.1.2, 1.3.6.1.4.1.9.9.719.1.45.11.1.9]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameCisco UCS Storage Raid Battery Status
    UnitNone

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency101 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical OperatorNOT_IN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold0,1,13,81,100,101,103,1070, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 51, 52, 81, 82, 83, 84, 100, 101, 102, 103, 104, 105, 106, 107, 108
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)NoYes/No

    Sample Output

    No graph

    ucs.switch.card.status

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.9.9.719.1.15.70.1.9
    ExpressionNULL
    DescriptionProvides the Cisco UCS equipment switch card distinguished name (DN) and the operational status. Possible equipment switch card operational states are 0-Unknown, 1- Operable, 2- Inoperable, 3- Degraded, 4- Powered Off, 5- Power Problem, 6- Removed, 7- Voltage Problem, 8- Thermal Problem, 9- Performance Problem, 10- Accessibility Problem, 11- Identity Unestablishable, 12- Bios Post Timeout, 13- Disabled, 14- Malformed FRU, 51- Fabric Connection Problem, 52- Fabric Unsupported Connection, 81- Config, 82- Equipment Problem, 83- Decomissioning, 84- Chassis Limit Exceeded, 100- Not Supported, 101- Discovery, 102- Discovery Failed, 103- Identify, 104- Post Failure, 105- Upgrade Problem, 106- Peer Communication Problem, 107- Auto upgrade, 108- Link Activate Blocked. [OIDs: 1.3.6.1.4.1.9.9.719.1.15.70.1.2, 1.3.6.1.4.1.9.9.719.1.15.70.1.9]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameCisco UCS Switch Card Status
    UnitNone

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency101 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical OperatorNOT_IN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold0,1,13,81,100,101,103,1070, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 51, 52, 81, 82, 83, 84, 100, 101, 102, 103, 104, 105, 106, 107, 108
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)NoYes/No

    Sample Output

    No graph