Description
Applicable on Compellent SAN devices. Monitors the Hardware parameters like Battery, FAN, Power, etc. along with the Disk, enclosure, managed server details, volume and Storage center status, etc.
Prerequisites
SNMP should be enabled in end device and device should support COMPELLENT-MIB OIDs and SNMP credentials should be attached against the device in portal.
How to Apply: This template is All instance selection based and Automatic select instance based. It will not ask user to select any instance (s) while assigning it to a device.
Metric Parameters
| Parameter | Description |
|---|---|
| Frequency | Warning Threshold | If the metric value satisfies the condition defined along with Warning Threshold value, then a notification is sent to the user. |
| Critical Threshold | If the metric value satisfies the condition defined along with Critical Threshold value, then a notification is sent to the user. |
| Alert | The alert value can be set to either Yes or No. If it is Yes, then an alert message is sent to the user. |
Metrics
dell.compellent.controller.battery.status
Metric Details
| Applicable for | Device |
| SNMP OID | 1.3.6.1.4.1.16139.2.28.1.5 |
| Expression | NULL |
| Description | Provides the controller cache battery status. Possible Values are 0-noBattery, 1-normal, 2-expirationPending, 3-expired. [OID:1.3.6.1.4.1.16139.2.28.1.5] |
| Category | SNMP monitors |
| Collector Type | Gateway |
| Monitor Name | Dell Compellent SAN - Cache and Battery Status |
| Unit |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 5 | 1 – 1440 (mins) |
| Filter | NULL | Not Applicable |
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | IN_LIST | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
| Critical Threshold | 2,3 | [{"0":"noBattery"},{"1":"normal"},{"2":"expiredPending"},{"3":"expired"}] |
| Critical Repeat Count | 1 | 1-12 |
| Alert | Yes | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
Battery Status
dell.compellent.controller.cache.status
Metric Details
| Applicable for | Device |
| SNMP OID | 1.3.6.1.4.1.16139.2.28.1.3 |
| Expression | NULL |
| Description | Provides the controller cache status. Possible Values are 1-Up, 2-Down, 3-Degraded [OID: 1.3.6.1.4.1.16139.2.28.1.3] |
| Category | SNMP monitors |
| Collector Type | Gateway |
| Monitor Name | Dell Compellent SAN - Cache and Battery Status |
| Unit |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 5 | 1 – 1440 (mins) |
| Filter | NULL | Not Applicable |
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | NOT_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
| Critical Threshold | 1 | [{"1":"up"},{"2":"down"},{"3":"degraded"}] |
| Critical Repeat Count | 1 | 1-12 |
| Alert | Yes | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
Cache Status
dell.compellent.controller.status
Metric Details
| Applicable for | Device |
| SNMP OID | 1.3.6.1.4.1.16139.2.13.1.3 |
| Expression | NULL |
| Description | Provides the controller status. Possible values are 1-up 2-down 3-degraded [OID: 1.3.6.1.4.1.16139.2.13.1.3] |
| Category | SNMP monitors |
| Collector Type | Gateway |
| Monitor Name | DELL Compellent SAN - Controller Status |
| Unit |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 5 | 1 – 1440 (mins) |
| Filter | NULL | Not Applicable |
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | NOT_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
| Critical Threshold | 1 | [{"1":"up"},{"2":"down"},{"3":"degraded"}] |
| Critical Repeat Count | 1 | 1-12 |
| Alert | Yes | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
Controller Status
dell.compellent.temperature.status
Metric Details
| Applicable for | Device |
| SNMP OID | 1.3.6.1.4.1.16139.2.19.1.3, 1.3.6.1.4.1.16139.2.19.1.5 |
| Expression | scCtlrTempStatus |
| Description | Provides the Temperature Status. Possible values are 1- Up, 2- Down, 3- Degraded. [OID: 1.3.6.1.4.1.16139.2.19.1.3]. |
| Category | SNMP monitors |
| Collector Type | Gateway |
| Monitor Name | Dell Compellent SAN - Controller Temperature Sensor Status |
| Unit |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 5 | 1 – 1440 (mins) |
| Filter | NULL | Not Applicable |
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | NOT_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
| Critical Threshold | 1 | [{"1":"up"},{"2":"down"},{"3":"degraded"}] |
| Critical Repeat Count | 1 | 1-12 |
| Alert | Yes | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
Temperature Status
dell.compellent.device.count
Metric Details
| Applicable for | Device |
| SNMP OID | 1.3.6.1.4.1.16139.2.31.1.3 |
| Expression | NULL |
| Description | Provides the Device Count. [OID: 1.3.6.1.4.1.16139.2.31.1.3] |
| Category | SNMP monitors |
| Collector Type | Gateway |
| Monitor Name | Dell Compellent SAN - Count Objects |
| Unit |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 5 | 1 – 1440 (mins) |
| Filter | NULL | Not Applicable |
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | ||
| Critical Threshold | ||
| Critical Repeat Count | ||
| Alert | No | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
Device Count
dell.compellent.replay.count
Metric Details
| Applicable for | Device |
| SNMP OID | 1.3.6.1.4.1.16139.2.31.1.4 |
| Expression | NULL |
| Description | Provides the Replay Count. [OID: 1.3.6.1.4.1.16139.2.31.1.4] |
| Category | SNMP monitors |
| Collector Type | Gateway |
| Monitor Name | Dell Compellent SAN - Count Objects |
| Unit |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 5 | 1 – 1440 (mins) |
| Filter | NULL | Not Applicable |
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | ||
| Critical Threshold | ||
| Critical Repeat Count | ||
| Alert | No | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
Replay Count
dell.compellent.number.disks
Metric Details
| Applicable for | Device |
| SNMP OID | 1.3.6.1.4.1.16139.2.31.1.5 |
| Expression | NULL |
| Description | Provides the Number of Disks. [OID: 1.3.6.1.4.1.16139.2.31.1.5]. |
| Category | SNMP monitors |
| Collector Type | Gateway |
| Monitor Name | Dell Compellent SAN - Count Objects |
| Unit |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 5 | 1 – 1440 (mins) |
| Filter | NULL | Not Applicable |
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | ||
| Critical Threshold | ||
| Critical Repeat Count | ||
| Alert | No | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
Number of Disks
dell.compellent.count.servers
Metric Details
| Applicable for | Device |
| SNMP OID | 1.3.6.1.4.1.16139.2.31.1.6 |
| Expression | NULL |
| Description | Provides the Count of Servers. [OID: 1.3.6.1.4.1.16139.2.31.1.6]. |
| Category | SNMP monitors |
| Collector Type | Gateway |
| Monitor Name | Dell Compellent SAN - Count Objects |
| Unit |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 5 | 1 – 1440 (mins) |
| Filter | NULL | Not Applicable |
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | ||
| Critical Threshold | ||
| Critical Repeat Count | ||
| Alert | No | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
Count of Servers
dell.compellent.count.volumes
Metric Details
| Applicable for | Device |
| SNMP OID | 1.3.6.1.4.1.16139.2.31.1.7 |
| Expression | NULL |
| Description | Provides the Count of Volumes. [OID: 1.3.6.1.4.1.16139.2.31.1.7]. |
| Category | SNMP monitors |
| Collector Type | Gateway |
| Monitor Name | Dell Compellent SAN - Count Objects |
| Unit |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 5 | 1 – 1440 (mins) |
| Filter | NULL | Not Applicable |
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | ||
| Critical Threshold | ||
| Critical Repeat Count | ||
| Alert | No | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
Count of Volumes
dell.compellent.disk.folder.status
Metric Details
| Applicable for | Device |
| SNMP OID | 1.3.6.1.4.1.16139.2.25.1.3 |
| Expression | NULL |
| Description | Provides the Disk folder status. Possible values are 1-up 2-down 3-degraded [OID: 1.3.6.1.4.1.16139.2.25.1.3] |
| Category | SNMP monitors |
| Collector Type | Gateway |
| Monitor Name | DELL Compellent SAN - Disk Folder Status |
| Unit |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 5 | 1 – 1440 (mins) |
| Filter | NULL | Not Applicable |
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | NOT_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
| Critical Threshold | 1 | [{"1":"up"},{"2":"down"},{"3":"degraded"}] |
| Critical Repeat Count | 1 | 1-12 |
| Alert | Yes | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
Disk Folder Status
dell.compellent.disk.status
Metric Details
| Applicable for | Device |
| SNMP OID | 1.3.6.1.4.1.16139.2.14.1.3, 1.3.6.1.4.1.16139.2.14.1.11, 1.3.6.1.4.1.16139.2.14.1.2, 1.3.6.1.4.1.16139.2.14.1.4, 1.3.6.1.4.1.16139.2.14.1.6 |
| Expression | scDiskStatus |
| Description | Provides the Disk Status. Possible values are 1-up 2-down 3-degraded [OID: 1.3.6.1.4.1.16139.2.14.1.3] |
| Category | SNMP monitors |
| Collector Type | Gateway |
| Monitor Name | DELL Compellent SAN - Disk Status |
| Unit |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 5 | 1 – 1440 (mins) |
| Filter | NULL | Not Applicable |
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | NOT_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
| Critical Threshold | 1 | [{"1":"up"},{"2":"down"},{"3":"degraded"}] |
| Critical Repeat Count | 1 | 1-12 |
| Alert | Yes | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
Disk Status
dell.compellent.disk.health
Metric Details
| Applicable for | Device |
| SNMP OID | 1.3.6.1.4.1.16139.2.14.1.5 |
| Expression | NULL |
| Description | Provides the Disk Health. Possible value is 1- True indicates that the disk is healthy. 2-False indicates that the disk not healthy. [OID: 1.3.6.1.4.1.16139.2.14.1.5] |
| Category | SNMP monitors |
| Collector Type | Gateway |
| Monitor Name | DELL Compellent SAN - Disk Status |
| Unit |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 5 | 1 – 1440 (mins) |
| Filter | NULL | Not Applicable |
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | NOT_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
| Critical Threshold | 1 | [{"1":"healthy"},{"2":"notHealthy"}] |
| Critical Repeat Count | 1 | 1-12 |
| Alert | Yes | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
Disk Health
dell.compellent.enclosure.alarm.status
Metric Details
| Applicable for | Device |
| SNMP OID | 1.3.6.1.4.1.16139.2.24.1.3 |
| Expression | NULL |
| Description | Provides the Enclosure Audible Alarm Status. Possible values are 1- Up, 2- Down, 3- Degraded. [OID: 1.3.6.1.4.1.16139.2.24.1.3]. |
| Category | SNMP monitors |
| Collector Type | Gateway |
| Monitor Name | Dell Compellent SAN - Enclosure Audible Alarm Status |
| Unit |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 5 | 1 – 1440 (mins) |
| Filter | NULL | Not Applicable |
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | NOT_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
| Critical Threshold | 1 | [{"1":"up"},{"2":"down"},{"3":"degraded"}] |
| Critical Repeat Count | 1 | 1-12 |
| Alert | Yes | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
Enclosure Audible Alarm Status
dell.compellent.enclosure.fan.status
Metric Details
| Applicable for | Device |
| SNMP OID | 1.3.6.1.4.1.16139.2.20.1.3, 1.3.6.1.4.1.16139.2.20.1.4 |
| Expression | scEnclFanStatus |
| Description | Provides the Enclosure Fan Status. Possible values are 1-up 2-down 3-degraded [OID: 1.3.6.1.4.1.16139.2.20.1.3] |
| Category | SNMP monitors |
| Collector Type | Gateway |
| Monitor Name | Dell Compellent SAN - Enclosure Fan Status |
| Unit |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 5 | 1 – 1440 (mins) |
| Filter | NULL | Not Applicable |
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | NOT_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
| Critical Threshold | 1 | [{"1":"up"},{"2":"down"},{"3":"degraded"}] |
| Critical Repeat Count | 1 | 1-12 |
| Alert | Yes | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
Enclosure Fan Status
dell.compellent.enclosure.module.status
Metric Details
| Applicable for | Device |
| SNMP OID | 1.3.6.1.4.1.16139.2.22.1.3 |
| Expression | NULL |
| Description | Provides the Enclosure I/O Module Status. Possible values are 1-up 2-down 3-degraded [OID: 1.3.6.1.4.1.16139.2.22.1.3] |
| Category | SNMP monitors |
| Collector Type | Gateway |
| Monitor Name | Dell Compellent SAN - Enclosure Module Status |
| Unit |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 5 | 1 – 1440 (mins) |
| Filter | NULL | Not Applicable |
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | NOT_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
| Critical Threshold | 1 | [{"1":"up"},{"2":"down"},{"3":"degraded"}] |
| Critical Repeat Count | 1 | 1-12 |
| Alert | Yes | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
Enclosure Module Status
dell.compellent.enclosure.power.status
Metric Details
| Applicable for | Device |
| SNMP OID | 1.3.6.1.4.1.16139.2.21.1.3 |
| Expression | NULL |
| Description | Provides the enclosure power supply status. Possible values are 1-up 2-down 3-degraded [OID: 1.3.6.1.4.1.16139.2.21.1.3] |
| Category | SNMP monitors |
| Collector Type | Gateway |
| Monitor Name | Dell Compellent SAN - Enclosure Power Supply Status |
| Unit |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 5 | 1 – 1440 (mins) |
| Filter | NULL | Not Applicable |
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | NOT_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
| Critical Threshold | 1 | [{"1":"up"},{"2":"down"},{"3":"degraded"}] |
| Critical Repeat Count | 1 | 1-12 |
| Alert | Yes | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
Enclosure Power Status
dell.compellent.enclosure.status
Metric Details
| Applicable for | Device |
| SNMP OID | 1.3.6.1.4.1.16139.2.15.1.3, 1.3.6.1.4.1.16139.2.15.1.5, 1.3.6.1.4.1.16139.2.15.1.6 |
| Expression | scEnclStatus |
| Description | Provides the Enclosure Status. Possible values are 1-up 2-down 3-degraded [OID: 1.3.6.1.4.1.16139.2.15.1.3] |
| Category | SNMP monitors |
| Collector Type | Gateway |
| Monitor Name | Dell Compellent SAN - Enclosure Status |
| Unit |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 5 | 1 – 1440 (mins) |
| Filter | NULL | Not Applicable |
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | NOT_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
| Critical Threshold | 1 | [{"1":"up"},{"2":"down"},{"3":"degraded"}] |
| Critical Repeat Count | 1 | 1-12 |
| Alert | Yes | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
Enclosure Status
dell.compellent.enclosure.temperature.status
Metric Details
| Applicable for | Device |
| SNMP OID | 1.3.6.1.4.1.16139.2.23.1.3, 1.3.6.1.4.1.16139.2.23.1.4, 1.3.6.1.4.1.16139.2.23.1.5 |
| Expression | scEnclTempStatus |
| Description | Provides the enclosure temperature sensor status. Possible values are 1-up 2-down 3-degraded. [OID: 1.3.6.1.4.1.16139.2.23.1.3] |
| Category | SNMP monitors |
| Collector Type | Gateway |
| Monitor Name | Dell Compellent SAN - Enclosure Temperature Sensor Status |
| Unit |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 5 | 1 – 1440 (mins) |
| Filter | NULL | Not Applicable |
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | NOT_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
| Critical Threshold | 1 | [{"1":"up"},{"2":"down"},{"3":"degraded"}] |
| Critical Repeat Count | 1 | 1-12 |
| Alert | Yes | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
Enclosure Temperature Status
dell.compellent.fan.status
Metric Details
| Applicable for | Device |
| SNMP OID | 1.3.6.1.4.1.16139.2.16.1.3, 1.3.6.1.4.1.16139.2.16.1.5 |
| Expression | scCtlrFanStatus |
| Description | Provides the Fan Status. Possible values are 1-up 2-down 3-degraded. [OID: 1.3.6.1.4.1.16139.2.16.1.3] |
| Category | SNMP monitors |
| Collector Type | Gateway |
| Monitor Name | Dell Compellent SAN - Fan Status |
| Unit |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 5 | 1 – 1440 (mins) |
| Filter | NULL | Not Applicable |
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | NOT_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
| Critical Threshold | 1 | [{"1":"up"},{"2":"down"},{"3":"degraded"}] |
| Critical Repeat Count | 1 | 1-12 |
| Alert | Yes | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
Fan Status
dell.compellent.managed.server.status
Metric Details
| Applicable for | Device |
| SNMP OID | 1.3.6.1.4.1.16139.2.27.1.3 |
| Expression | NULL |
| Description | Provides the Managed Server Status. Possible values are 1- Up, 2- Down, 3- Degraded. [OID: 1.3.6.1.4.1.16139.2.27.1.3]. |
| Category | SNMP monitors |
| Collector Type | Gateway |
| Monitor Name | Dell Compellent SAN - Managed Server Status |
| Unit |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 5 | 1 – 1440 (mins) |
| Filter | NULL | Not Applicable |
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | NOT_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
| Critical Threshold | 1 | [{"1":"up"},{"2":"down"},{"3":"degraded"}] |
| Critical Repeat Count | 1 | 1-12 |
| Alert | Yes | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
Managed Server Status
dell.compellent.monitored.ups.status
Metric Details
| Applicable for | Device |
| SNMP OID | 1.3.6.1.4.1.16139.2.30.1.3 |
| Expression | NULL |
| Description | Provides the Monitored UPS Status. Possible values are 1- Up,2- Down, 3- Degraded. [OID: 1.3.6.1.4.1.16139.2.30.1.3]. |
| Category | SNMP monitors |
| Collector Type | Gateway |
| Monitor Name | Dell Compellent SAN - Managed UPS Status |
| Unit |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 5 | 1 – 1440 (mins) |
| Filter | NULL | Not Applicable |
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | NOT_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
| Critical Threshold | 1 | [{"1":"up"},{"2":"down"},{"3":"degraded"}] |
| Critical Repeat Count | 1 | 1-12 |
| Alert | Yes | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
dell.compellent.power.status
Metric Details
| Applicable for | Device |
| SNMP OID | 1.3.6.1.4.1.16139.2.17.1.3 |
| Expression | NULL |
| Description | Provides the Power Status. Possible values are 1- Up, 2- Down, 3- Degraded. [OID: 1.3.6.1.4.1.16139.2.17.1.3]. |
| Category | SNMP monitors |
| Collector Type | Gateway |
| Monitor Name | Dell Compellent SAN - Power Status |
| Unit |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 5 | 1 – 1440 (mins) |
| Filter | NULL | Not Applicable |
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | NOT_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
| Critical Threshold | 1 | [{"1":"up"},{"2":"down"},{"3":"degraded"}] |
| Critical Repeat Count | 1 | 1-12 |
| Alert | Yes | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
Power Status
dell.compellent.global.status
Metric Details
| Applicable for | Device |
| SNMP OID | 1.3.6.1.4.1.16139.2.6.0 |
| Expression | NULL |
| Description | Monitors the current status of the product. This is a rollup for the entire product including any monitored devices. The status is intended to give initiative to an SNMP monitor to get further data when this status is abnormal. The value here maps from the System Status icon on the SC GUI: grey->unknown, green->ok, yellow->noncritical, red->critical. Possible values are 1-other 2-unkown 3-ok 4-noncritical 5-critical 6-nonrecoverable. [OID: 1.3.6.1.4.1.16139.2.6.0] |
| Category | SNMP monitors |
| Collector Type | Gateway |
| Monitor Name | Dell Compellent SAN - Product Global Status |
| Unit |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 5 | 1 – 1440 (mins) |
| Filter | ||
| Warning Operator | IN_LIST | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
| Warning Threshold | 1,2,4 | [{"1":"other"},{"2":"unknown"},{"3":"ok"},{"4":"noncritical"},{"5":"critical"},{"6":"nonrecoverable"}] |
| Warning Repeat Count | 1 | 1-12 |
| Critical Operator | IN_LIST | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
| Critical Threshold | 5,6 | [{"1":"other"},{"2":"unknown"},{"3":"ok"},{"4":"noncritical"},{"5":"critical"},{"6":"nonrecoverable"}] |
| Critical Repeat Count | 1 | 1-12 |
| Alert | Yes | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
Global Status
dell.compellent.storage.center.status
Metric Details
| Applicable for | Device |
| SNMP OID | 1.3.6.1.4.1.16139.2.29.1.3, 1.3.6.1.4.1.16139.2.29.1.8 |
| Expression | scScStatus |
| Description | Provides the Storage Center Status. Possible values are 1- Up,2- Down, 3- Degraded. [OID: 1.3.6.1.4.1.16139.2.29.1.3] |
| Category | SNMP monitors |
| Collector Type | Gateway |
| Monitor Name | Dell Compellent SAN - Storage Center Status |
| Unit |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 5 | 1 – 1440 (mins) |
| Filter | NULL | Not Applicable |
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | NOT_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
| Critical Threshold | 1 | [{"1":"up"},{"2":"down"},{"3":"degraded"}] |
| Critical Repeat Count | 1 | 1-12 |
| Alert | Yes | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
Storage Center Status
dell.compellent.volume.status
Metric Details
| Applicable for | Device |
| SNMP OID | 1.3.6.1.4.1.16139.2.26.1.3 |
| Expression | NULL |
| Description | Provides the Volume Status. Possible values are 1- Up, 2- Down, 3- Degraded. [OID: 1.3.6.1.4.1.16139.2.26.1.3]. |
| Category | SNMP monitors |
| Collector Type | Gateway |
| Monitor Name | Dell Compellent SAN - Volume Status |
| Unit |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 5 | 1 – 1440 (mins) |
| Filter | NULL | Not Applicable |
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | NOT_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
| Critical Threshold | 1 | [{"1":"up"},{"2":"down"},{"3":"degraded"}] |
| Critical Repeat Count | 1 | 1-12 |
| Alert | Yes | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
Volume Status
dell.compellent.disk.folder.space.used
Metric Details
| Applicable for | Device |
| SNMP OID | 1.3.6.1.4.1.674.11000.2000.500.1.2.32.1.6 |
| Expression | NULL |
| Description | It represents the Disk Folder Storage Usage used space, in GB (1,073,741,824). Matches 'Allocated space used by volumes' on SC GUI. [OIDs: 1.3.6.1.4.1.674.11000.2000.500.1.2.32.1.6] |
| Category | SNMP monitors |
| Collector Type | Gateway |
| Monitor Name | DELL Compellent SAN - Disk Folder Storage Usage |
| Unit | GB |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 5 | 1 – 1440 (mins) |
| Filter | Name Not contains Unassigned | |
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | ||
| Critical Threshold | ||
| Critical Repeat Count | ||
| Alert | No | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
Disk Folder Space Used
dell.compellent.disk.folder.space.free
Metric Details
| Applicable for | Device |
| SNMP OID | 1.3.6.1.4.1.674.11000.2000.500.1.2.32.1.8 |
| Expression | NULL |
| Description | Disk Folder Storage Usage free space, in GB (1,073,741,824). scDiskFolderSUFreeSpace = scDiskFolderSUTotalSpace2 - scDiskFolderSUAllocSpace - scDiskFolderSUUsedSpace2. Matches 'Unallocated disk space' on SC GUI. [OIDs: 1.3.6.1.4.1.674.11000.2000.500.1.2.32.1.8, 1.3.6.1.4.1.674.11000.2000.500.1.2.32.1.7, 1.3.6.1.4.1.674.11000.2000.500.1.2.32.1.6, 1.3.6.1.4.1.674.11000.2000.500.1.2.32.1.5] |
| Category | SNMP monitors |
| Collector Type | Gateway |
| Monitor Name | DELL Compellent SAN - Disk Folder Storage Usage |
| Unit | GB |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 5 | 1 – 1440 (mins) |
| Filter | Name Not contains Unassigned | |
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | ||
| Critical Threshold | ||
| Critical Repeat Count | ||
| Alert | No | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
Disk Folder Space Free
dell.compellent.disk.folder.space.utilization
Metric Details
| Applicable for | Device |
| SNMP OID | 1.3.6.1.4.1.674.11000.2000.500.1.2.32.1.5 |
| Expression | (scDiskFolderSUUsedSpace2 * 100) / scDiskFolderSUTotalSpace2 |
| Description | Represents the Disk Folder Storage Usage space utilization, in percentage. dell.compellent.disk.folder.space.utilization = ((scDiskFolderSUUsedSpace2 * 100) / scDiskFolderSUTotalSpace2). [OIDs: 1.3.6.1.4.1.674.11000.2000.500.1.2.32.1.5, 1.3.6.1.4.1.674.11000.2000.500.1.2.32.1.6] |
| Category | SNMP monitors |
| Collector Type | Gateway |
| Monitor Name | DELL Compellent SAN - Disk Folder Storage Usage |
| Unit | % |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 5 | 1 – 1440 (mins) |
| Filter | Name Not contains Unassigned | |
| Warning Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
| Warning Threshold | 70 | 0-100 |
| Warning Repeat Count | 1 | 1-12 |
| Critical Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
| Critical Threshold | 80 | 0-100 |
| Critical Repeat Count | 1 | 1-12 |
| Alert | Yes | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
