Description

Applicable on Dell Power edge M1000e Rack system. Monitors the components like chassis status, fan, power, IOM, temperature, etc.

Prerequisites

SNMP should be enabled in end device and device should support DELL-RAC-MIB OIDs and SNMP credentials should be attached against the device in portal.

Metric Parameters

Metric Parameters
ParameterDescription
Frequency
  • Frequency is the interval in which you want to probe and collect metric data from the target device/resource
  • Frequency is defined in minutes (min).
  • Warning ThresholdIf the metric value satisfies the condition defined along with Warning Threshold value, then a notification is sent to the user.
    Critical ThresholdIf the metric value satisfies the condition defined along with Critical Threshold value, then a notification is sent to the user.
    AlertThe alert value can be set to either Yes or No. If it is Yes, then an alert message is sent to the user.

    Metrics

    dell.drac.temperature.sensor.status

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.674.10892.2.3.1.8.0
    ExpressionNULL
    DescriptionTemp Sensor subsystem health status. Possible values are 1 -Other, 2 -Unknown, 3 -OK, 4 -Non-critical, 5 -Critical, 6 -Non-recoverable [OID: 1.3.6.1.4.1.674.10892.2.3.1.8.0]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameDell DRAC Hardware Status Monitors
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    Filter
    Warning OperatorEQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold41-6
    Warning Repeat Count11-12
    Critical OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold5,61-6
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    dell.drac.fan.status

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.674.10892.2.3.1.6.0
    ExpressionNULL
    DescriptionFan subsystem health status - This system has 9(8+1 redundant) Fan modules. Any single fan can fail without impacting system uptime or reliability. In the event of a fan failure, system behavior is dependent on the resultant temperatures of the system, as monitored by the Server Module iDRAC and I/O Modules. The CMC continues to interpret the airflow needs of each server and I/O module to control the fan speeds appropriately. The system will not ramp the fans to full speed in the event of a fan failure unless deemed necessary by on-board monitoring. Failure of more than one fan will not automatically result in shutting down of blade servers. This is because the blade servers have their own self-protection mechanisms to prevent them from running too hot. The result of a failure of multiple fans would depend on the configuration, ambient temperature, and workload being run. Possible values 1- Other, 2 - Unknown, 3 - OK, 4 - Noncritical, 5 - Critical, 6 - Non-recoverable [OID: 1.3.6.1.4.1.674.10892.2.3.1.6.0]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameDell DRAC Hardware Status Monitors
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    Filter
    Warning OperatorEQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold41-6
    Warning Repeat Count11-12
    Critical OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold5,61-6
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    dell.drac.iom.module.status

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.674.10892.2.3.1.2.0
    ExpressionNULL
    DescriptionIOM Status - IOM subsystem status. The chassis can hold up to six I/O modules (IOMs). Possible values 1 -Other, 2 -Unknown, 3 -OK, 4 -Non-critical, 5 -Critical, 6 -Non-recoverable [OID: 1.3.6.1.4.1.674.10892.2.3.1.2.0]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameDell DRAC Hardware Status Monitors
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    Filter
    Warning OperatorEQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold41-6
    Warning Repeat Count11-12
    Critical OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold5,61-6
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    dell.drac.cmc.status

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.674.10892.2.3.1.9.0
    ExpressionNULL
    DescriptionCMC health status -Chassis Management Controller (CMC). The system normally has 2 CMC, CMC -1 is standard and CMC-2 provides optional redundancy. Possible values 1 -Other, 2 -Unknown, 3 -OK, 4 -Non-critical, 5 -Critical, 6 -Non-recoverable [OID: 1.3.6.1.4.1.674.10892.2.3.1.9.0]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameDell DRAC Hardware Status Monitors
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    Filter
    Warning OperatorEQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold41-6
    Warning Repeat Count11-12
    Critical OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold5,61-6
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    dell.drac.redundancy.status

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.674.10892.2.3.1.4.0
    ExpressionNULL
    DescriptionStatus of the redundancy subsystem. Possible values 1 -Other, 2 -Unknown, 3 -OK, 4 -Non-critical, 5 -Critical, 6 -Non-recoverable [OID: 1.3.6.1.4.1.674.10892.2.3.1.4.0]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameDell DRAC Hardware Status Monitors
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    Filter
    Warning OperatorEQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold41-6
    Warning Repeat Count11-12
    Critical OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold5,61-6
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    dell.drac.kvm.status

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.674.10892.2.3.1.3.0
    ExpressionNULL
    DescriptionIntegrated Keyboard/Video/Mouse (iKVM) switch KVM subsystem health status. Possible values are 1 -Other, 2 -Unknown, 3 -OK, 4 -Noncritical, 5 -Critical, 6 -Non-recoverable [OID: 1.3.6.1.4.1.674.10892.2.3.1.3.0]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameDell DRAC Hardware Status Monitors
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    Filter
    Warning OperatorEQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold41-6
    Warning Repeat Count11-12
    Critical OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold5,61-6
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    dell.drac.power.status

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.674.10892.2.3.1.5.0
    ExpressionNULL
    DescriptionPower Subsystem Health Status - The system has 6 Power modules. If the system has this configuration then the system will provide protection against AC grid loss or power supply failures. If one power grid fails, three power supplies lose their AC source, and the three power supplies on the other grid remain powered, providing sufficient power for the system to continue running. In the N+1 configuration only power supply failures are protected, not grid failures. The likelihood of multiple power supplies failing at the same time is remote. In the N+0 configuration there is no power protection and any protection must be provided at the node or chassis level. Possible values 1- Other, 2 - Unknown, 3 - OK, 4 - Noncritical, 5 - Critical, 6 - Non-recoverable [OID: 1.3.6.1.4.1.674.10892.2.3.1.5.0]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameDell DRAC Hardware Status Monitors
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    Filter
    Warning OperatorEQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold41-6
    Warning Repeat Count11-12
    Critical OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold5,61-6
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    dell.drac.blade.status

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.674.10892.2.3.1.7.0
    ExpressionNULL
    DescriptionBlade subsystem health status. Possible values 1 -Other, 2 -Unknown, 3 -OK, 4 -Non-critical, 5 -Critical, 6 -Non-recoverable [OID: 1.3.6.1.4.1.674.10892.2.3.1.7.0]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameDell DRAC Hardware Status Monitors
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    Filter
    Warning OperatorEQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold41-6
    Warning Repeat Count11-12
    Critical OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold5,61-6
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    dell.global.current.status

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.674.10892.2.3.1.1.0
    ExpressionNULL
    DescriptionProvides the global status. This attribute defines the overall chassis status being monitored by the chassis management card.DellStatus 1- Other, 2-Unknown, 3- Ok, 4- Non Critical, 5-Critical, 6- Non Recoverable.Alert is generated when the current vale not equal to OK and previous vale is equal to OK. [OID: 1.3.6.1.4.1.674.10892.2.3.1.1].
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameDell DRAC Hardware Status Monitors
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    Filter
    Warning OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold1,2,41-6
    Warning Repeat Count11-12
    Critical OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold5,61-6
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    dell.drac.status

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.674.10892.2.2.1.0
    ExpressionNULL
    DescriptionChassis Status - defines the overall chassis status being monitored by the chassis management card. Possible values 1 -Other, 2 -Unknown, 3 -OK, 4 -Non-critical, 5 -Critical, 6 -Non-recoverable [OID: 1.3.6.1.4.1.674.10892.2.2.1.0]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameDell DRAC Status
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    Filter
    Warning OperatorEQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold41-6
    Warning Repeat Count11-12
    Critical OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold5,61-6
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    Dell Drac Status

    Dell Drac Status