Description

Template for Dell iDRAC. Monitors Global storage status, global system status, LCD status and power status. Virtual Disk, Physical Disk, Memory(DIMMs), CPU, Power Supply, Power Unit, Fan, Battery, Temperature Sensor, BIOS, Voltage,
Amperage, etc. Tested on Dell iDRAC PowerEdge R620 device.

Prerequisites

SNMP should be enabled in end device and device should support IDRAC-MIB, IDRAC-MIB-SMIv2 OIDs and SNMP credentials should be attached against the device in portal.

How to Apply: This template is All instance selection based and Automatic select instance based. It will not ask user to select any instance (s) while assigning it to a device.

Metric Parameters

Metric Parameters
ParameterDescription
Frequency
  • Frequency is the interval in which you want to probe and collect metric data from the target device/resource
  • Frequency is defined in minutes (min).
  • Warning ThresholdIf the metric value satisfies the condition defined along with Warning Threshold value, then a notification is sent to the user.
    Critical ThresholdIf the metric value satisfies the condition defined along with Critical Threshold value, then a notification is sent to the user.
    AlertThe alert value can be set to either Yes or No. If it is Yes, then an alert message is sent to the user.

    Metrics

    dell.idrac.global.system.status

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.674.10892.5.2.1.0
    ExpressionNULL
    DescriptionIndicates the overall rollup status of all components in the system being monitored by the remote access card. Includes system, storage, IO devices, iDRAC, CPU, memory, etc. Possible status values are 1- Other, 2- Unknown, 3- OK, 4- Non Critical, 5- Critical, 6-nonRecoverable.
    [OID: 1.3.6.1.4.1.674.10892.5.2.1.0]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameDell iDRAC System Stats
    UnitNone

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    Filter
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold5,61-6
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    dell.idrac.system.lcd.status

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.674.10892.5.2.2.0
    ExpressionNULL
    DescriptionIndicates the system status as it is reflected by the LCD front panel. Not all system components may be included. Possible status values are 1: Other, 2- Unknown, 3- OK, 4- Non Critical, 5- Critical, 6- Non Recoverable. [OID: 1.3.6.1.4.1.674.10892.5.2.2.0]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameDell iDRAC System Stats
    UnitNone

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    Filter
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold5,61-6
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    dell.idrac.global.storage.status

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.674.10892.5.2.3.0
    ExpressionNULL
    DescriptionIndicates the overall storage status being monitored by the remote access card. Possible status values are 1: Other, 2- Unknown, 3- OK, 4- Non Critical, 5- Critical, 6- Non Recoverable.
    [OID: 1.3.6.1.4.1.674.10892.5.2.3.0]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameDell iDRAC System Stats
    UnitNone

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    Filter
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold5,61-6
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    dell.idrac.system.power.state

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.674.10892.5.2.4.0
    ExpressionNULL
    DescriptionIndicates the power state of the system. Possible status values are 1: Other, 2- Unknown, 3- Off, 4- On. [OID: 1.3.6.1.4.1.674.10892.5.2.4.0]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameDell iDRAC System Stats
    UnitNone

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    Filter
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical OperatorEQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold31-4
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    dell.idrac.amperage.reading.amps

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.674.10892.5.4.600.30.1.6
    ExpressionamperageProbeReading / 10
    DescriptionRepresents the power usage that the probe is reading in Amps. It monitors only when amperageProbeType is amperageProbeTypeIsPowerSupplyAmps or amperageProbeTypeIsSystemAmps. [OIDs: 1.3.6.1.4.1.674.10892.5.4.600.30.1.6]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameDell iDRAC Amperage Reading in Amps
    Unitamps

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    FilteramperageProbeType
    In List
    23,25
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical Operator
    Critical Threshold
    Critical Repeat Count
    AlertNoYes/No
    Graph (Yes/No)YesYes/No

    Note: As Alert is not enabled on the above metric, the fields are left blank.

    Sample Output

    No graph

    dell.idrac.amperage.reading.watts

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.674.10892.5.4.600.30.1.6
    ExpressionNULL
    DescriptionRepresents the power usage that the probe is reading in Watts. It monitors only when amperageProbeType is amperageProbeTypeIsPowerSupplyWatts or amperageProbeTypeIsSystemWatts. [OIDs: 1.3.6.1.4.1.674.10892.5.4.600.30.1.6]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameDell iDRAC Amperage Reading in Watts
    UnitW

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    FilteramperageProbeType
    In List
    24,26
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical Operator
    Critical Threshold
    Critical Repeat Count
    AlertNoYes/No
    Graph (Yes/No)YesYes/No

    Note: As Alert is not enabled on the above metric, the fields are left blank.

    Sample Output

    No graph

    dell.idrac.amperage.probe.status

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.674.10892.5.4.600.30.1.5
    ExpressionNULL
    DescriptionRepresents the probe status of the amperage probe. [OID: 1.3.6.1.4.1.674.10892.5.4.600.30.1.5]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameDell iDRAC Amperage Status
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    FilterNULLNot Applicable
    Warning OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold4,71-10
    Warning Repeat Count11-12
    Critical OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold2,5,6,8,9,101-10
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)NoYes/No

    Sample Output

    No graph

    dell.idrac.system.chassis.status

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.674.10892.5.4.300.10.1.4, 1.3.6.1.4.1.674.10892.5.4.300.10.1.15
    ExpressionchassisStatus
    DescriptionRepresents the status of the system chassis. [OIDs: 1.3.6.1.4.1.674.10892.5.4.300.10.1.4, 1.3.6.1.4.1.674.10892.5.4.300.10.1.7]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameDell iDRAC Chassis Status
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    FilterNULLNot Applicable
    Warning OperatorEQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold41-6
    Warning Repeat Count11-12
    Critical OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold2,5,61-6
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    dell.idrac.cpu.status

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.674.10892.5.4.1100.32.1.5, 1.3.6.1.4.1.674.10892.5.4.1100.32.1.6, 1.3.6.1.4.1.674.10892.5.4.1100.30.1.5,
    1.3.6.1.4.1.674.10892.5.4.1100.30.1.12, 1.3.6.1.4.1.674.10892.5.4.1100.30.1.23
    Expressionif(isDef(processorDeviceStatusStatus), processorDeviceStatusStatus, processorDeviceStatus)
    DescriptionMonitors the status of the processor device status probe.
    [OIDs: 1.3.6.1.4.1.674.10892.5.4.1100.32.1.5, 1.3.6.1.4.1.674.10892.5.4.1100.32.1.6, 1.3.6.1.4.1.674.10892.5.4.1100.32.1.7,
    1.3.6.1.4.1.674.10892.5.4.1100.30.1.5,n1.3.6.1.4.1.674.10892.5.4.1100.30.1.8]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameDell iDRAC CPU Status
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    FilterNULLNot Applicable
    Warning OperatorEQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold41-6
    Warning Repeat Count11-12
    Critical OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold2,5,61-6
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    dell.idrac.enclosure.powersupplies.status

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.674.10892.5.5.1.20.130.9.1.4, 1.3.6.1.4.1.674.10892.5.5.1.20.130.9.1.9
    ExpressionenclosurePowerSupplyComponentStatus
    DescriptionMonitors the status of the power supply unit itself without the propagation of any contained component status. Possible values: 1: Other, 2: Unknown, 3: OK, 4: Non-critical, 5: Critical, 6: Non-recoverable. [OIDs: 1.3.6.1.4.1.674.10892.5.5.1.20.130.9.1.1, 1.3.6.1.4.1.674.10892.5.5.1.20.130.9.1.2, 1.3.6.1.4.1.674.10892.5.5.1.20.130.9.1.4, 1.3.6.1.4.1.674.10892.5.5.1.20.130.9.1.9]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameDell iDRAC Enclosure Power Supplies
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    FilterNULLNot Applicable
    Warning OperatorEQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold41-6
    Warning Repeat Count11-12
    Critical OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold2,5,61-6
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    dell.idrac.fan.speed

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.674.10892.5.4.700.12.1.6
    ExpressionNULL
    DescriptionRepresents the reading for a cooling device of subtypes (coolingDeviceSubTypeIsAFanThatReadsInRPM and coolingDeviceSubTypeIsAPowerSupplyFanThatReadsinRPM)
    [OID: 1.3.6.1.4.1.674.10892.5.4.700.12.1.6]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameDell iDRAC Fan Reading
    Unitrpm

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    FiltercoolingDeviceSubType
    In List
    3,5
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical Operator
    Critical Threshold
    Critical Repeat Count
    AlertNoYes/No
    Graph (Yes/No)YesYes/No

    Note: As Alert is not enabled on the above metric, the fields are left blank.

    Sample Output

    No graph

    dell.idrac.fan.status

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.674.10892.5.4.700.12.1.5, 1.3.6.1.4.1.674.10892.5.4.700.12.1.6
    ExpressioncoolingDeviceStatus
    DescriptionRepresents the status of the probe status of the cooling device/fan.
    [OIDs: 1.3.6.1.4.1.674.10892.5.4.700.12.1.2, 1.3.6.1.4.1.674.10892.5.4.700.12.1.5, 1.3.6.1.4.1.674.10892.5.4.700.12.1.8]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameDell iDRAC Fan Status
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    FilterNULLNot Applicable
    Warning OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold4,71-10
    Warning Repeat Count11-12
    Critical OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold2,5,6,8,9,101-10
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)NoYes/No

    Sample Output

    No graph

    dell.idrac.intrusion.reading

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.674.10892.5.4.300.70.1.6
    ExpressionNULL
    DescriptionIt represents the intrusion reading.
    [OIDs: 1.3.6.1.4.1.674.10892.5.4.300.70.1.6, 1.3.6.1.4.1.674.10892.5.4.300.70.1.8]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameDell iDRAC Intrusion Status
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical Operator
    Critical Threshold
    Critical Repeat Count
    AlertNoYes/No
    Graph (Yes/No)YesYes/No

    Note: As Alert is not enabled on the above metric, the fields are left blank.

    Sample Output

    No graph

    dell.idrac.intrusion.status

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.674.10892.5.4.300.70.1.5, 1.3.6.1.4.1.674.10892.5.4.300.70.1.7
    ExpressionintrusionStatus
    DescriptionThe status of the intrusion sensor. [OIDs: 1.3.6.1.4.1.674.10892.5.4.300.70.1.5, 1.3.6.1.4.1.674.10892.5.4.300.70.1.6, 1.3.6.1.4.1.674.10892.5.4.300.70.1.7, 1.3.6.1.4.1.674.10892.5.4.300.70.1.8]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameDell iDRAC Intrusion Status
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    FilterNULLNot Applicable
    Warning OperatorEQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold41-6
    Warning Repeat Count11-12
    Critical OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold2,5,61-6
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)NoYes/No

    Sample Output

    No graph

    dell.idrac.memory.status

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.674.10892.5.4.1100.50.1.5, 1.3.6.1.4.1.674.10892.5.4.1100.50.1.14
    ExpressionmemoryDeviceStatus
    DescriptionRepresents the status of the memory(DIMMs). [OIDs: 1.3.6.1.4.1.674.10892.5.4.1100.50.1.5, 1.3.6.1.4.1.674.10892.5.4.1100.50.1.8, 1.3.6.1.4.1.674.10892.5.4.1100.50.1.14]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameDell iDRAC Memory(DIMMs) Status
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    FilterNULLNot Applicable
    Warning OperatorEQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold41-6
    Warning Repeat Count11-12
    Critical OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold2,5,61-6
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    dell.idrac.phydisk.status

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.674.10892.5.5.1.20.130.4.1.4
    ExpressionNULL
    DescriptionThe current state of this physical disk. Possible states - 1: unknown - The current state could not be determined. 2: ready - The physical disk is available for use, but no RAID configuration has been assigned. 3: online - A RAID configuration has been assigned to the physical disk. 4: foreign - The physical disk has been moved from another controller and contains all or some portion of a virtual disk. 5: offline - The physical disk is not available to the RAID controller. 6: blocked - The physical disk is currently blocked by controller. 7: failed - The physical disk is not operational. 8: non-raid - The physical disk is not a RAID capable disk 9: removed - The physical disk has been removed.
    [OID: 1.3.6.1.4.1.674.10892.5.5.1.20.130.4.1.2, 1.3.6.1.4.1.674.10892.5.5.1.20.130.4.1.4]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameDell iDRAC Physical Disk Status
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold1,5,6,7,91-9
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    dell.idrac.phydisk.smart.status

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.674.10892.5.5.1.20.130.4.1.31
    ExpressionNULL
    DescriptionMonitors whether the physical disk has received a predictive failure alert or not. Possible values are 0(False), 1(True). It generates alert if it is True. [OID: 1.3.6.1.4.1.674.10892.5.5.1.20.130.4.1.2, 1.3.6.1.4.1.674.10892.5.5.1.20.130.4.1.31]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameDell iDRAC Physical Disk Status
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical OperatorEQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold10, 1
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    dell.idrac.powersupply.status

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.674.10892.5.4.600.12.1.5,
    1.3.6.1.4.1.674.10892.5.4.600.12.1.11, 1.3.6.1.4.1.674.10892.5.4.600.12.1.12, 1.3.6.1.4.1.674.10892.5.4.600.12.1.7
    ExpressionpowerSupplyStatus
    DescriptionMonitors the status of the power supply. [OIDs: 1.3.6.1.4.1.674.10892.5.4.600.12.1.5, 1.3.6.1.4.1.674.10892.5.4.600.12.1.7, 1.3.6.1.4.1.674.10892.5.4.600.12.1.8, 1.3.6.1.4.1.674.10892.5.4.600.12.1.11, 1.3.6.1.4.1.674.10892.5.4.600.12.1.12]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameDell iDRAC Power Supply Status
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    FilterNULLNot Applicable
    Warning OperatorEQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold41-6
    Warning Repeat Count11-12
    Critical OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold2,5,61-6
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    dell.idrac.system.battery.reading

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.674.10892.5.4.600.50.1.6
    ExpressionNULL
    DescriptionIt represents the battery reading. [OIDs: 1.3.6.1.4.1.674.10892.5.4.600.50.1.6, 1.3.6.1.4.1.674.10892.5.4.600.50.1.7]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameDell iDRAC System Battery Status
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical Operator
    Critical Threshold
    Critical Repeat Count
    AlertNoYes/No
    Graph (Yes/No)YesYes/No

    Note: As Alert is not enabled on the above metric, the fields are left blank.

    Sample Output

    No graph

    dell.idrac.system.battery.status

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.674.10892.5.4.600.50.1.5
    ExpressionNULL
    DescriptionIt represents the status of the battery. [OIDs: 1.3.6.1.4.1.674.10892.5.4.600.50.1.5, 1.3.6.1.4.1.674.10892.5.4.600.50.1.6, 1.3.6.1.4.1.674.10892.5.4.600.50.1.7]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameDell iDRAC System Battery Status
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    FilterNULLNot Applicable
    Warning OperatorEQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold41-6
    Warning Repeat Count11-12
    Critical OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold2,5,61-6
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)NoYes/No

    Sample Output

    No graph

    dell.idrac.system.bios.status

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.674.10892.5.4.300.50.1.5, 1.3.6.1.4.1.674.10892.5.4.300.50.1.1
    ExpressionsystemBIOSStatus
    DescriptionRepresents the status of the system BIOS. [OID: 1.3.6.1.4.1.674.10892.5.4.300.50.1.5]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameDell iDRAC System BIOS Status
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    FilterNULLNot Applicable
    Warning OperatorEQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold41-6
    Warning Repeat Count11-12
    Critical OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold2,5,61-6
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    dell.idrac.temperature.reading

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.674.10892.5.4.700.20.1.6
    ExpressiontemperatureProbeReading/10
    DescriptionIt represents the reading for a temperature probe. [OIDs: 1.3.6.1.4.1.674.10892.5.4.700.20.1.5, 1.3.6.1.4.1.674.10892.5.4.700.20.1.6, 1.3.6.1.4.1.674.10892.5.4.700.20.1.8]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameDell iDRAC Temperature
    UnitC

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical Operator
    Critical Threshold
    Critical Repeat Count
    AlertNoYes/No
    Graph (Yes/No)YesYes/No

    Note: As Alert is not enabled on the above metric, the fields are left blank.

    Sample Output

    No graph

    dell.idrac.temperature.status

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.674.10892.5.4.700.20.1.5, 1.3.6.1.4.1.674.10892.5.4.700.20.1.7
    ExpressiontemperatureProbeStatus
    DescriptionIt represents the probe status of the temperature probe. [OIDs: 1.3.6.1.4.1.674.10892.5.4.700.20.1.5, 1.3.6.1.4.1.674.10892.5.4.700.20.1.6, 1.3.6.1.4.1.674.10892.5.4.700.20.1.7, 1.3.6.1.4.1.674.10892.5.4.700.20.1.8]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameDell iDRAC Temperature
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    FilterNULLNot Applicable
    Warning OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold4,71-10
    Warning Repeat Count11-12
    Critical OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold2,5,6,8,9,101-10
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)NoYes/No

    Sample Output

    No graph

    dell.idrac.virtual.disk.status

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.674.10892.5.5.1.20.140.1.1.4
    ExpressionNULL
    DescriptionRepresents the current state of this virtual disk (which includes any member physical disks.)nPossible states: 1: The current state could not be determined. 2: The virtual disk is operating normally or optimally. 3: The virtual disk has encountered a failure. The data on disk nis lost or is about to be lost. 4: The virtual disk encounterd a failure with one or all of the constituent redundant physical disks. The data on the virtual disk might no longer be fault tolerant.
    [OIDs: 1.3.6.1.4.1.674.10892.5.5.1.20.140.1.1.2, 1.3.6.1.4.1.674.10892.5.5.1.20.140.1.1.3]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameDell iDRAC Virtual Disk Status
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical OperatorNOT_EQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold21-4
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    dell.idrac.virtual.disk.badblocks

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.674.10892.5.5.1.20.140.1.1.23
    ExpressionNULL
    DescriptionIndicates whether the virtual disk has bad blocks. [OID: 1.3.6.1.4.1.674.10892.5.5.1.20.140.1.1.23]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameDell iDRAC Virtual Disk Status
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical OperatorEQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold10, 1
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    dell.idrac.voltage.prob.reading

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.674.10892.5.4.600.20.1.6
    ExpressionvoltageProbeReading/1000
    DescriptionMonitors the power supply voltage probe reading. [OIDs: 1.3.6.1.4.1.674.10892.5.4.600.20.1.6, 1.3.6.1.4.1.674.10892.5.4.600.20.1.8]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameDell iDRAC Voltage
    Unitv

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical Operator
    Critical Threshold
    Critical Repeat Count
    AlertNoYes/No
    Graph (Yes/No)YesYes/No

    Note: As Alert is not enabled on the above metric, the fields are left blank.

    Sample Output

    No graph

    dell.idrac.voltage.prob.status

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.674.10892.5.4.600.20.1.5
    ExpressionNULL
    DescriptionRepresents the probe status of the voltage probe. [OID: 1.3.6.1.4.1.674.10892.5.4.600.20.1.5]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameDell iDRAC Voltage
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    FilterNULLNot Applicable
    Warning OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold4,71-10
    Warning Repeat Count11-12
    Critical OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold2,5,6,8,9,101-10
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)NoYes/No

    Sample Output

    No graph

    dell.idrac.amperage.reading.milliamps

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.674.10892.5.4.600.30.1.6
    ExpressionNULL
    DescriptionRepresents the power usage that the probe is reading in Milliamps. It monitors only when amperageProbeType is other than amperageProbeTypeIsDiscrete, amperageProbeTypeIsPowerSupplyAmps, amperageProbeTypeIsPowerSupplyWatts, amperageProbeTypeIsSystemAmps or amperageProbeTypeIsSystemWatts.
    [OIDs: 1.3.6.1.4.1.674.10892.5.4.600.30.1.6]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameDell iDRAC Amperage Reading in Milliamps
    UnitmA

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    FilteramperageProbeType
    Not in list
    16,23,24,25,26
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical Operator
    Critical Threshold
    Critical Repeat Count
    AlertNoYes/No
    Graph (Yes/No)YesYes/No

    Note: As Alert is not enabled on the above metric, the fields are left blank.

    Sample Output

    No graph