Description
Monitors the basic system performance monitors like CPU, Memory and Uptime. It also monitors the hardware parameters like Fan, Temperature, Power supply and global status of the system. Tested on PowerConnect 7048, 5.1.3.7, VxWorks 6.6.
[SysObjId: 1.3.6.1.4.1.674.10895.3035].
Prerequisites
SNMP should be enabled in end device and device should support DNOS-BOXSERVICES-PRIVATE-MIB, DNOS-SWITCHING-MIB and Dell-Vendor-MIB OIDs and SNMP credentials should be attached against the device in portal.
How to Apply:This template is All instance selection based. It will not ask user to select any instance (s) while assigning it to a device.
Metric Parameters
Parameter | Description |
---|---|
Frequency | Warning Threshold | If the metric value satisfies the condition defined along with Warning Threshold value, then a notification is sent to the user. |
Critical Threshold | If the metric value satisfies the condition defined along with Critical Threshold value, then a notification is sent to the user. |
Alert | The alert value can be set to either Yes or No. If it is Yes, then an alert message is sent to the user. |
Metrics
system.uptime
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.2.1.1.3.0 |
Expression | sysUpTime/100 |
Description | The time since the SNMP agent in the system was last re-initialized.[OID : 1.3.6.1.2.1.1.3.0] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | System Uptime |
Unit | s |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 5 | 1 – 1440 (mins) |
Filter | ||
Warning Operator | ||
Warning Threshold | ||
Warning Repeat Count | ||
Critical Operator | LESS_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 1800 | 0 - 4294967295 |
Critical Repeat Count | 1 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
hw.dell.powerconnect.global.status
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.674.10895.3000.1.2.110.1.0 |
Expression | NULL |
Description | Indicates the current status of the Dell PowerConnect product. This is a rollup for the entire product. The status is intended to give initiative to a snmp monitor to get further data when this status is abnormal. Possible status values are 3- OK: If fans and power supplies are functioning and the system did not reboot because of a HW watchdog failure or a SW fatal error condition. 4- Non-critical: If at least one power supply is not functional or the system rebooted at least once because of a HW watchdog failure or a SW fatal error condition, 5- Critical: If at least one fan is not functional, possibly causing a dangerous warming up of the device. [OID: 1.3.6.1.4.1.674.10895.3000.1.2.110.1.0] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Dell PowerConnect Product Global Status |
Unit |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 5 | 1 – 1440 (mins) |
Filter | ||
Warning Operator | EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Warning Threshold | 4 | [{"3":"Ok"},{"4":"Non-critical"},{"5":"Critical"}] |
Warning Repeat Count | 1 | 1-12 |
Critical Operator | EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 5 | [{"3":"Ok"},{"4":"Non-critical"},{"5":"Critical"}] |
Critical Repeat Count | 1 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
system.memory.util.percent
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.1.0 |
Expression | ((agentSwitchCpuProcessMemAvailable - agentSwitchCpuProcessMemFree) / agentSwitchCpuProcessMemAvailable) * 100 |
Description | Memory Utilization - Indicates the instances of the memory pool which are currently in use and which are free. [OIDs: 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.1.0,n1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.2.0] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Dell PowerConnect Memory Utilization - DNOS (fastPathSwitching) |
Unit | % |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 5 | 1 – 1440 (mins) |
Filter | ||
Warning Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Warning Threshold | 80 | 0-100 |
Warning Repeat Count | 2 | 1-12 |
Critical Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 90 | 0-100 |
Critical Repeat Count | 2 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
system.cpu.utilization
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.9.0 |
Expression | PARSER(agentSwitchCpuProcessTotalUtilization,'{1}','300 Secs ( (d+(.d+)*)%)') |
Description | Monitors the total CPU Utilization. |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Dell PowerConnect CPU Utilization - DNOS (fastPathSwitching) |
Unit | % |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 5 | 1 – 1440 (mins) |
Filter | ||
Warning Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Warning Threshold | 80 | 0-100 |
Warning Repeat Count | 2 | 1-12 |
Critical Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 90 | 0-100 |
Critical Repeat Count | 2 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
hw.dell.powerconnect.power.supply.status
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.43.1.7.1.1 |
Expression | boxServicesPowSupplyItemState |
Description | Monitors the status of power supply. |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Dell PowerConnect Power Supply - DNOS (fastPathBoxServices) |
Unit |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 5 | 1 – 1440 (mins) |
Filter | NULL | Not Applicable |
Warning Operator | ||
Warning Threshold | ||
Warning Repeat Count | ||
Critical Operator | IN_LIST | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 3,5,6,7 | [{"1":"notpresent"},{"2":"operational"},{"3":"failed"},{"4":"powering"},{"5":"nopower"},{"6":"notpowering"},{"7":"incompatible"}] |
Critical Repeat Count | 1 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
hw.dell.powerconnect.temperature.value
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.43.1.8.1.5 |
Expression | boxServicesTempSensorTemperature |
Description | Represents the power connect temperature value reported by sensor. |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Dell PowerConnect Temperature - DNOS (fastPathBoxServices) |
Unit | C |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 5 | 1 – 1440 (mins) |
Filter | NULL | Not Applicable |
Warning Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Warning Threshold | 40 | 0 - 2147483647 |
Warning Repeat Count | 1 | 1-12 |
Critical Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 45 | 0 - 2147483647 |
Critical Repeat Count | 1 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
hw.dell.powerconnect.fan.status
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.43.1.6.1.2 |
Expression | boxServicesFanItemState |
Description | Indicates the status of fan. |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Dell PowerConnect Fan - DNOS (fastPathBoxServices) |
Unit |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 5 | 1 – 1440 (mins) |
Filter | NULL | Not Applicable |
Warning Operator | EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Warning Threshold | 7 | [{"1":"notpresent"},{"2":"operational"},{"3":"failed"},{"4":"powering"},{"5":"nopower"},{"6":"notpowering"},{"7":"incompatible"}] |
Warning Repeat Count | 1 | 1-12 |
Critical Operator | EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 3 | [{"1":"notpresent"},{"2":"operational"},{"3":"failed"},{"4":"powering"},{"5":"nopower"},{"6":"notpowering"},{"7":"incompatible"}] |
Critical Repeat Count | 1 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
hw.dell.powerconnect.fan.speed
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.43.1.6.1.4 |
Expression | NULL |
Description | Monitors the speed of the Fan. |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Dell PowerConnect Fan - DNOS (fastPathBoxServices) |
Unit | rpm |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 5 | 1 – 1440 (mins) |
Filter | NULL | Not Applicable |
Warning Operator | ||
Warning Threshold | ||
Warning Repeat Count | ||
Critical Operator | ||
Critical Threshold | ||
Critical Repeat Count | ||
Alert | No | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output