Description
Default monitoring and alertingTemplate for Dell Servers. Monitors chassis intrusion detection reading, memory status,
system board fan speed, etc.
Prerequisites
SNMP should be enabled in end device and device should support MIB-Dell-10892, StorageManagement-MIB OIDs and SNMP credentials should be attached against the device in portal.
How to Apply: This template is All instance selection based. It will not ask user to select any instance (s) while assigning it to a device.
Metric Parameters
Parameter | Description |
---|---|
Frequency | |
Warning Threshold | If the metric value satisfies the condition defined along with Warning Threshold value, then a notification is sent to the user. |
Critical Threshold | If the metric value satisfies the condition defined along with Critical Threshold value, then a notification is sent to the user. |
Alert | The alert value can be set to either Yes or No. If it is Yes, then an alert message is sent to the user. |
Metrics
arraycontroller.status
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.674.10893.1.20.130.1.1.38 |
Expression | NULL |
Description | Monitors the status of the controller itself without the propagation of any contained component status. Possible values are 1- Other, 2- Unknown, 3- OK, 4- Non-critical, 5- Critical, 6- Non-recoverable. [OIDs: 1.3.6.1.4.1.674.10893.1.20.130.1.1.2, 1.3.6.1.4.1.674.10893.1.20.130.1.1.38] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Dell Server Array Controller Status |
Unit |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | 1 – 1440 (mins) |
Filter | NULL | Not Applicable |
Warning Operator | ||
Warning Threshold | ||
Warning Repeat Count | ||
Critical Operator | EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 5 | 1-6 |
Critical Repeat Count | 1 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
arraycontroller.component.status.all
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.674.10893.1.20.130.1.1.37 |
Expression | NULL |
Description | Monitors the severity of the controller state. This is the combined status of the controller and its components. Possible values are 1- other, 2- unknown, 3- ok, 4- nonCritical, 5- critical, 6- nonRecoverable. [OIDs: 1.3.6.1.4.1.674.10893.1.20.130.1.1.2, 1.3.6.1.4.1.674.10893.1.20.130.1.1.37]n |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Dell Server Array Controller Status |
Unit |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | 1 – 1440 (mins) |
Filter | NULL | Not Applicable |
Warning Operator | ||
Warning Threshold | ||
Warning Repeat Count | ||
Critical Operator | EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 5 | 1-6 |
Critical Repeat Count | 1 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
dell.arraydisk.component.status
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.674.10893.1.20.130.4.1.24 |
Expression | NULL |
Description | Monitors the status of the array disk itself without the propagation of any contained component status. Possible values are 1- other, 2- unknown, 3- ok, 4- nonCritical, 5- critical, 6- nonRecoverable. [OIDs: 1.3.6.1.4.1.674.10893.1.20.130.4.1.2, 1.3.6.1.4.1.674.10893.1.20.130.4.1.24] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Dell Server Array Disk Component Status |
Unit |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | 1 – 1440 (mins) |
Filter | NULL | Not Applicable |
Warning Operator | ||
Warning Threshold | ||
Warning Repeat Count | ||
Critical Operator | EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 5 | 1-6 |
Critical Repeat Count | 1 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
dell.baseboard.powersupply.status
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.674.10892.1.600.12.1.5.1 |
Expression | NULL |
Description | Represents the status of the Dell baseboard power supply. [OID: 1.3.6.1.4.1.674.10892.1.600.12.1.5] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Dell Server Baseboard Power Supply Status |
Unit |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | 1 – 1440 (mins) |
Filter | NULL | Not Applicable |
Warning Operator | ||
Warning Threshold | ||
Warning Repeat Count | ||
Critical Operator | IN_LIST | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 5,6 | 1-6 |
Critical Repeat Count | 1 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
dell.baseboard.powersupply.sensor.status
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.674.10892.1.600.12.1.11.1 |
Expression | NULL |
Description | This attribute defines the state reported by the power supply sensor. This attribute supplements the attribute powerSupplyStateSettingsUnique. [OID: 1.3.6.1.4.1.674.10892.1.600.12.1.11, 1.3.6.1.4.1.674.10892.1.600.12.1.4] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Dell Server Baseboard Power Supply Status |
Unit |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | 1 – 1440 (mins) |
Filter | NULL | Not Applicable |
Warning Operator | IN_LIST | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Warning Threshold | 32,64 | 1,2,4,8,16,32,64 |
Warning Repeat Count | 1 | 1-12 |
Critical Operator | IN_LIST | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 2,4,8,16 | 1,2,4,8,16,32,64 |
Critical Repeat Count | 1 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
hw.chasis.intrusion.detection.reading
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.674.10892.1.300.70.1.6.1 |
Expression | NULL |
Description | Monitors the the reading of the intrusion sensor. Possible values are 1- chassisNotBreached, 2- chassisBreached, 3- chassisBreachedPrior, 4- chassisBreachSensorFailure. [OIDs: 1.3.6.1.4.1.674.10892.1.300.70.1.2.1, 1.3.6.1.4.1.674.10892.1.300.70.1.6.1] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Dell Server Chassis Intrusion |
Unit |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | 1 – 1440 (mins) |
Filter | NULL | Not Applicable |
Warning Operator | ||
Warning Threshold | ||
Warning Repeat Count | ||
Critical Operator | IN_LIST | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 2,4 | 1-4 |
Critical Repeat Count | 1 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
hw.chasis.intrusion.obj.status
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.674.10892.1.300.70.1.5 |
Expression | NULL |
Description | Monitors the status of the intrusion sensor. Possible values are 1- other, 2- unknown, 3- ok, 4- nonCritical, 5- critical, 6- nonRecoverable. [OIDs: 1.3.6.1.4.1.674.10892.1.300.70.1.2, 1.3.6.1.4.1.674.10892.1.300.70.1.5] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Dell Server Chassis Intrusion Sensor Status |
Unit |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | 1 – 1440 (mins) |
Filter | NULL | Not Applicable |
Warning Operator | ||
Warning Threshold | ||
Warning Repeat Count | ||
Critical Operator | EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 5 | 1-6 |
Critical Repeat Count | 1 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
dell.memory.device.status
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.674.10892.1.1100.50.1.5.1 |
Expression | NULL |
Description | Monitors the status of the memory device. Possible values are 1- other, 2- unknown, 3- ok, 4- nonCritical, 5- critical, 6- nonRecoverable. [OIDs: 1.3.6.1.4.1.674.10892.1.1100.50.1.2.1, 1.3.6.1.4.1.674.10892.1.1100.50.1.5.1] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Dell Server Memory Device Status |
Unit |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | 1 – 1440 (mins) |
Filter | NULL | Not Applicable |
Warning Operator | ||
Warning Threshold | ||
Warning Repeat Count | ||
Critical Operator | EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 5 | 1-6 |
Critical Repeat Count | 1 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
dell.processor.device.status
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.674.10892.1.1100.30.1.5.1 |
Expression | NULL |
Description | Monitors the status of the processor device. Possible values are 1- other, 2- unknown, 3- ok, 4- nonCritical, 5- critical, 6- nonRecoverable. [OIDs: 1.3.6.1.4.1.674.10892.1.1100.30.1.2.1, 1.3.6.1.4.1.674.10892.1.1100.30.1.5.1] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Dell Server Processor Device Status |
Unit |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | 1 – 1440 (mins) |
Filter | NULL | Not Applicable |
Warning Operator | ||
Warning Threshold | ||
Warning Repeat Count | ||
Critical Operator | EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 5 | 1-6 |
Critical Repeat Count | 1 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
dell.processor.device.status.state
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.674.10892.1.1100.30.1.9.1 |
Expression | NULL |
Description | Monitors the status state of the processor device. Possible values are 1- other, 2- unknown, 3- enabled, 4- userDisabled, 5- biosDisabled, 6- idle. [OIDs: 1.3.6.1.4.1.674.10892.1.1100.30.1.2.1, 1.3.6.1.4.1.674.10892.1.1100.30.1.9.1] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Dell Server Processor Device Status |
Unit |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | 1 – 1440 (mins) |
Filter | NULL | Not Applicable |
Warning Operator | ||
Warning Threshold | ||
Warning Repeat Count | ||
Critical Operator | EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 4 | 1-6 |
Critical Repeat Count | 1 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
dell.hw.bios.status
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.674.10892.1.300.50.1.5 |
Expression | NULL |
Description | Monitors the status of the system BIOS. Possible values are 1- other, 2- unknown, 3- ok, 4- nonCritical, 5- critical, 6- nonRecoverable. [OIDs: 1.3.6.1.4.1.674.10892.1.300.50.1.2, 1.3.6.1.4.1.674.10892.1.300.50.1.5] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Dell Server System Board BIOS Status |
Unit |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | 1 – 1440 (mins) |
Filter | NULL | Not Applicable |
Warning Operator | ||
Warning Threshold | ||
Warning Repeat Count | ||
Critical Operator | EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 5 | 1-6 |
Critical Repeat Count | 1 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
dell.systemboard.fan.speed
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.674.10892.1.700.12.1.6.1 |
Expression | NULL |
Description | Monitors the system board fan speed. [OIDs: 1.3.6.1.4.1.674.10892.1.700.12.1.2.1, 1.3.6.1.4.1.674.10892.1.700.12.1.6.1] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Dell Server System Board Fan Speed |
Unit | rpm |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | 1 – 1440 (mins) |
Filter | NULL | Not Applicable |
Warning Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Warning Threshold | 13200 | 0 – 4294967295 |
Warning Repeat Count | 1 | 1-12 |
Critical Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 14600 | 0 – 4294967295 |
Critical Repeat Count | 1 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
dell.voltage.probe.status
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.674.10892.1.600.20.1.5.1 |
Expression | NULL |
Description | Monitors the probe status of the voltage probe. :Possible values are 1- other, 2- unknown, 3- ok, 4- nonCriticalUpper, 5- criticalUpper, 6- nonRecoverableUpper, 7- nonCriticalLower, 8- criticalLower, 9- nonRecoverableLower, 10- failed. [OIDs: 1.3.6.1.4.1.674.10892.1.600.20.1.2.1, 1.3.6.1.4.1.674.10892.1.600.20.1.5.1] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Dell Server Voltage Probe Status |
Unit |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | 1 – 1440 (mins) |
Filter | NULL | Not Applicable |
Warning Operator | ||
Warning Threshold | ||
Warning Repeat Count | ||
Critical Operator | EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 5 | 1-10 |
Critical Repeat Count | 1 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output