Description
Monitors the statistics for a collection of Ethernet-like interfaces attached to a particular system.
Prerequisites
SNMP should be enabled in end device and device should support EtherLike-MIB OIDs and SNMP credentials should be attached against the device in portal.
How to Apply: While assigning the template, it will show get components discovery button. Once we click on it, it will show values for the following properties: Name
Metric Parameters
Parameter | Description |
---|---|
Frequency | Warning Threshold | If the metric value satisfies the condition defined along with Warning Threshold value, then a notification is sent to the user. |
Critical Threshold | If the metric value satisfies the condition defined along with Critical Threshold value, then a notification is sent to the user. |
Alert | The alert value can be set to either Yes or No. If it is Yes, then an alert message is sent to the user. |
Metrics
dot3.excessive.collisions
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.2.1.10.7.2.1.9 |
Expression | NULL |
Description | Monitors the current number of frames for which transmission on a particular interface fails due to excessive collisions. [OID: 1.3.6.1.2.1.10.7.2.1.9] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Dot3 Stats |
Unit | None |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | 1 – 1440 (mins) |
Filter | ||
Warning Operator | ||
Warning Threshold | ||
Warning Repeat Count | ||
Critical Operator | ||
Critical Threshold | ||
Critical Repeat Count | ||
Alert | No | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
dot3.internal.mac.rcverrors
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.2.1.10.7.2.1.16 |
Expression | NULL |
Description | Monitors the current number of frames for which reception on a particular interface fails due to an internal MAC sub-layer receive error. [OID: 1.3.6.1.2.1.10.7.2.1.16] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Dot3 Stats |
Unit | None |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | 1 – 1440 (mins) |
Filter | Name | |
Warning Operator | ||
Warning Threshold | ||
Warning Repeat Count | ||
Critical Operator | ||
Critical Threshold | ||
Critical Repeat Count | ||
Alert | No | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
dot3.Internal.mac.transmiterrors
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.2.1.10.7.2.1.10 |
Expression | NULL |
Description | Monitors the current number of frames for which transmission on a interface fails due to an internal sub-layer transmit error. [OID: 1.3.6.1.2.1.10.7.2.1.10] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Dot3 Stats |
Unit | None |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | 1 – 1440 (mins) |
Filter | Name | |
Warning Operator | ||
Warning Threshold | ||
Warning Repeat Count | ||
Critical Operator | ||
Critical Threshold | ||
Critical Repeat Count | ||
Alert | No | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
dot3.late.collisions
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.2.1.10.7.2.1.8 |
Expression | NULL |
Description | Monitors the current number of times that a collision is on a particular interface later than slot-time into the transmission of a packet. [OID: 1.3.6.1.2.1.10.7.2.1.8] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Dot3 Stats |
Unit | None |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | 1 – 1440 (mins) |
Filter | Name | |
Warning Operator | ||
Warning Threshold | ||
Warning Repeat Count | ||
Critical Operator | ||
Critical Threshold | ||
Critical Repeat Count | ||
Alert | No | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
dot3.multiple.collision.frames
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.2.1.10.7.2.1.5 |
Expression | NULL |
Description | Monitors the current number of frames that are involved in more than one collision and are subsequently transmitted successfully. [OID: 1.3.6.1.2.1.10.7.2.1.5] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Dot3 Stats |
Unit | None |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | 1 – 1440 (mins) |
Filter | Name | |
Warning Operator | ||
Warning Threshold | ||
Warning Repeat Count | ||
Critical Operator | ||
Critical Threshold | ||
Critical Repeat Count | ||
Alert | No | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
dot3.single.collision.frames
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.2.1.10.7.2.1.4 |
Expression | NULL |
Description | Monitors the current number of frames that are involved in a single collision, and are subsequently transmitted successfully. [OID: 1.3.6.1.2.1.10.7.2.1.4] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Dot3 Stats |
Unit | None |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | 1 – 1440 (mins) |
Filter | Name | |
Warning Operator | ||
Warning Threshold | ||
Warning Repeat Count | ||
Critical Operator | ||
Critical Threshold | ||
Critical Repeat Count | ||
Alert | No | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
fcs.errors
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.2.1.10.7.2.1.3 |
Expression | NULL |
Description | Provides the current number of frames received on a particular interface that are an integral number of octets in length but do not pass the FCS check. [OID: 1.3.6.1.2.1.10.7.2.1.3] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Dot3 Stats |
Unit | None |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | 1 – 1440 (mins) |
Filter | Name | |
Warning Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Warning Threshold | 10 | 0 - 4294967295 |
Warning Repeat Count | 1 | 1-12 |
Critical Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 100 | 0 - 4294967295 |
Critical Repeat Count | 1 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph