Description

Monitors errored seconds, severely errored seconds and unavailable seconds on DS1 interfaces.

Prerequisites

SNMP should be enabled in end device and device should support DS1-MIB OIDs and SNMP credentials should be attached against the device in portal.

How to Apply: This template is All instance selection based. It will not ask user to select any instance(s) while assigning it to a device.

Metric Parameters

Metric Parameters
ParameterDescription
Frequency
  • Frequency is the interval in which you want to probe and collect metric data from the target device/resource
  • Frequency is defined in minutes (min).
  • Warning ThresholdIf the metric value satisfies the condition defined along with Warning Threshold value, then a notification is sent to the user.
    Critical ThresholdIf the metric value satisfies the condition defined along with Critical Threshold value, then a notification is sent to the user.
    AlertThe alert value can be set to either Yes or No. If it is Yes, then an alert message is sent to the user.

    Metrics

    ds1.total.errored.secs

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.2.1.10.18.9.1.2
    ExpressionNULL
    DescriptionMonitors the number of Errored Seconds encountered by a DS1 interface in the previous 24-hour interval. [OIDs: 1.3.6.1.2.1.10.18.9.1.2, 1.3.6.1.2.1.2.2.1.2]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameDS1 Interface Stats
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    FilterNULLNot Applicable
    Warning OperatorGREATER_THAN_EQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold100
    0 - 4294967295
    Warning Repeat Count11-12
    Critical OperatorGREATER_THAN_EQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold200
    0 - 4294967295
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    ds1.total.severely.errored.secs

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.2.1.10.18.9.1.3
    ExpressionNULL
    DescriptionMonitors the number of Severely Errored Seconds encountered by a DS1 interface in the previous 24-hour interval. [OIDs: 1.3.6.1.2.1.10.18.9.1.3, 1.3.6.1.2.1.2.2.1.2]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameDS1 Interface Stats
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    FilterNULLNot Applicable
    Warning OperatorGREATER_THAN_EQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold100
    0 - 4294967295
    Warning Repeat Count11-12
    Critical OperatorGREATER_THAN_EQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold200
    0 - 4294967295
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    ds1.total.unavailable.secs

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.2.1.10.18.9.1.5
    ExpressionNULL
    DescriptionMonitors the number of Unavailable Seconds encountered by a DS1 interface in the previous 24-hour interval. [OIDs: 1.3.6.1.2.1.10.18.9.1.5, 1.3.6.1.2.1.2.2.1.2]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameDS1 Interface Stats
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    FilterNULLNot Applicable
    Warning OperatorGREATER_THAN_EQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold100
    0 - 4294967295
    Warning Repeat Count11-12
    Critical OperatorGREATER_THAN_EQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold200
    0 - 4294967295
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph