Description
Monitors the MAC Control frames received and transmitted through ethernet-like interfaces with an opcode indicating the PAUSE operation.
Prerequisites
SNMP should be enabled in end device and device should support EtherLike-MIB, IF-MIB OIDs and SNMP credentials should be attached against the device in portal.
How to Apply: This template is All instance selection based. It will not ask user to select any instance(s) while assigning it to a device.
Metric Parameters
Parameter | Description |
---|---|
Frequency | Warning Threshold | If the metric value satisfies the condition defined along with Warning Threshold value, then a notification is sent to the user. |
Critical Threshold | If the metric value satisfies the condition defined along with Critical Threshold value, then a notification is sent to the user. |
Alert | The alert value can be set to either Yes or No. If it is Yes, then an alert message is sent to the user. |
Metrics
network.interface.pause.frames.in
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.2.1.10.7.10.1.3, 1.3.6.1.2.1.10.7.10.1.5 |
Expression | if(isDef(dot3HCInPauseFrames),dot3HCInPauseFrames,dot3InPauseFrames) |
Description | Represents the MAC Control frames received on this interface with an opcode indicating the PAUSE operation. [OIDs: 1.3.6.1.2.1.10.7.10.1.3, 1.3.6.1.2.1.10.7.10.1.5] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Ethernet-like Interfaces PAUSE Stats |
Unit | psec |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 5 | 1 – 1440 (mins) |
Filter | NULL | Not Applicable |
Warning Operator | ||
Warning Threshold | ||
Warning Repeat Count | ||
Critical Operator | ||
Critical Threshold | ||
Critical Repeat Count | ||
Alert | No | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
network.interface.pause.frames.out
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.2.1.10.7.10.1.4, 1.3.6.1.2.1.10.7.10.1.6 |
Expression | if(isDef(dot3HCOutPauseFrames),dot3HCOutPauseFrames,dot3OutPauseFrames) |
Description | Represents the MAC Control frames transmitted on this interface with an opcode indicating the PAUSE operation. [OIDs: 1.3.6.1.2.1.10.7.10.1.4, 1.3.6.1.2.1.10.7.10.1.6] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Ethernet-like Interfaces PAUSE Stats |
Unit | psec |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 5 | 1 – 1440 (mins) |
Filter | NULL | Not Applicable |
Warning Operator | ||
Warning Threshold | ||
Warning Repeat Count | ||
Critical Operator | ||
Critical Threshold | ||
Critical Repeat Count | ||
Alert | No | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
Note: Validated this template in Nexus 7000 10-Slot Switch N7K-C7010, Nexus 7000 C7009 devices. This template may not work on N5K/N6K platforms. Please see the following link for reference.
Referred links: https://supportforums.cisco.com/discussion/11735461/using-snmp-read-flow-control-counters-nexus-55xx https://bst.cloudapps.cisco.com/bugsearch/bug/CSCue81346;jsessionid=2CBC7F0B4DFABB98796576BBF1E30BDB