Description

Applicable on the extreme wireless controller devices. Monitors the access point state, wireless controller temporary license days remaining and link failures in paired status. Can be applied on Extreme Networks Wireless Controller - V2110, System Version 09.01.02.0017. SNMP Obj Id=1.3.6.1.4.1.4329.15.1.1.13.

Prerequisites

SNMP should be enabled in end device and device should support HIPATH-WIRELESS-HWC-MIB OIDs and SNMP credentials should be attached against the device in portal.

How to Apply: This template is All instance selection based. It will not ask user to select any instance(s) while assigning it to a device.

Metric Parameters

Metric Parameters
ParameterDescription
Frequency
  • Frequency is the interval in which you want to probe and collect metric data from the target device/resource
  • Frequency is defined in minutes (min).
  • Warning ThresholdIf the metric value satisfies the condition defined along with Warning Threshold value, then a notification is sent to the user.
    Critical ThresholdIf the metric value satisfies the condition defined along with Critical Threshold value, then a notification is sent to the user.
    AlertThe alert value can be set to either Yes or No. If it is Yes, then an alert message is sent to the user.

    Metrics

    extreme.wireless.apstate

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.4329.15.3.5.1.2.1.22
    ExpressionNULL
    DescriptionMonitors the the current state of the access point. Active means that access point has registered with this controller at some point of time and still has active connection with this controller. This variable has meaning in the context of the controller that query is done. Inactive mean access point has lost the connection with this controller. Possible status values are: 1-Active, 2- Inactive.
    [OIDs: 1.3.6.1.4.1.4329.15.3.5.1.2.1.2, 1.3.6.1.4.1.4329.15.3.5.1.2.1.22]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameExtreme Wireless AP State
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical OperatorEQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold2[{"1":"active"},{"2":"inactive"}]
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    Extreme Wireless AP State

    Extreme Wireless AP State

    extreme.wirelesscontroller.temp.licensedaysremaining

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.4329.15.3.2.10.1.1.0,
    1.3.6.1.4.1.4329.15.3.2.10.1.2.0, 1.3.6.1.4.1.4329.15.3.2.10.1.3.0
    Expressionif ((licenseType == 2),licenseDaysRemaining,"permanent")
    DescriptionMonitors the number of days left for the temporary license to expire.
    [OIDs: 1.3.6.1.4.1.4329.15.3.2.10.1.1.0, 1.3.6.1.4.1.4329.15.3.2.10.1.2.0, 1.3.6.1.4.1.4329.15.3.2.10.1.3.0]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameExtreme Wireless Controller License Days Remaining
    UnitDays

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    Filter
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical OperatorLESS_THAN_EQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold30
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)NoYes/No

    Sample Output

    No graph

    extreme.wirelesscontroller.detect.linkfailures

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.4329.15.3.2.8.1.0,
    1.3.6.1.4.1.4329.15.3.2.8.5.0
    Expressionif ((availabilityStatus== 1),detectLinkFailure,0)
    DescriptionMonitors the link failures details of availability pairing. Time to detect link failure between two controllers in availability pairing, the value can be set to values between 2-30 seconds. Based on the availability status only we are monitoring the link failure, it will be monitored only when it is in paired status. [OIDs: 1.3.6.1.4.1.4329.15.3.2.8.1.0, 1.3.6.1.4.1.4329.15.3.2.8.5.0]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameExtreme Wireless Controller Link Failures Detect
    Units

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    Filter
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical OperatorGREATER_THAN_EQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold15
    0 - 4294967295
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)NoYes/No

    Sample Output

    No graph