Description

Monitors system health parameters such as CPU utilization, memory utilization, disk utilization, up time and cluster state.

Prerequisites

SNMP should be enabled in end device and device should support F5-BIGIP-SYSTEM-MIB OIDs and SNMP credentials should be attached against the device in portal.

How to Apply: This template is All instance selection based and Automatic select instance based. It will not ask user to select any instance (s) while assigning it to a device.

Metric Parameters

Metric Parameters
ParameterDescription
Frequency
  • Frequency is the interval in which you want to probe and collect metric data from the target device/resource
  • Frequency is defined in minutes (min).
  • Warning ThresholdIf the metric value satisfies the condition defined along with Warning Threshold value, then a notification is sent to the user.
    Critical ThresholdIf the metric value satisfies the condition defined along with Critical Threshold value, then a notification is sent to the user.
    AlertThe alert value can be set to either Yes or No. If it is Yes, then an alert message is sent to the user.

    Metrics

    f5lb.global.host.cpu.utilization

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.3375.2.1.1.2.20.37.0
    ExpressionNULL
    DescriptionMonitors the F5 load balancer global host cpu utilization. [OID: 1.3.6.1.4.1.3375.2.1.1.2.20.37.0]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameF5-LB Host CPU Utilization
    Unit%

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    Filter
    Warning OperatorGREATER_THAN_EQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold650-100
    Warning Repeat Count21-12
    Critical OperatorGREATER_THAN_EQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold700-100
    Critical Repeat Count21-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    F5 LB Host CPU Utiliztion

    F5 LB Host CPU Utiliztion

    f5lb.multihost.system.cpu.util

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.3375.2.1.7.5.2.1.35, 1.3.6.1.4.1.3375.2.1.7.5.2.1.2
    ExpressionsysMultiHostCpuUsageRatio5m
    DescriptionMonitors the average usage ratio of CPU for the associated host in the last five minutes. It is calculated by (sum of detals for user, niced, system)/(sum of deltas of user, niced, system, idle, irq, softirq, and iowait), where each delta is the difference for each stat over the last 5-minute interval; [user: sysMultiHostCpuUser5m; niced: sysMultiHostCpuNiced5m; system: sysMultiHostCpuSystem5m; idle: sysMultiHostCpuIdle5m; irq: sysMultiHostCpuIrq5m; iowait: sysMultiHostCpuIowait5m]. [OIDs: 1.3.6.1.4.1.3375.2.1.7.5.2.1.1, 1.3.6.1.4.1.3375.2.1.7.5.2.1.2, 1.3.6.1.4.1.3375.2.1.7.5.2.1.35]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameF5-LB System CPU Utilization
    Unit%

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency51 – 1440 (mins)
    FilterNULLNot Applicable
    Warning OperatorGREATER_THAN_EQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold800-100
    Warning Repeat Count21-12
    Critical OperatorGREATER_THAN_EQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold900-100
    Critical Repeat Count21-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    F5 LB  Multi Host CPU Utiliztion

    F5 LB Host Multi CPU Utiliztion

    f5lb.system.host.memory.utilization

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.3375.2.1.7.1.2.0, 1.3.6.1.4.1.3375.2.1.7.1.1.0
    Expression(sysHostMemoryUsed/sysHostMemoryTotal)*100
    DescriptionProvides the F5 Load Balancer system host memory utilization (not including TMM).
    [OIDs: 1.3.6.1.4.1.3375.2.1.7.1.1.0, 1.3.6.1.4.1.3375.2.1.7.1.2.0]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameF5-LB System Memory Utilization
    Unit%

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    Filter
    Warning OperatorGREATER_THAN_EQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold850-100
    Warning Repeat Count21-12
    Critical OperatorGREATER_THAN_EQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold900-100
    Critical Repeat Count21-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    F5 LB System Host Memory Utiliztion

    F5 LB System Host Memory Utiliztion

    f5lb.tmm.memory.utilization

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.3375.2.1.1.2.1.44.0, 1.3.6.1.4.1.3375.2.1.1.2.1.45.0
    Expression(sysStatMemoryUsed/sysStatMemoryTotal)*100
    DescriptionProvides the F5 Load Balancer system TMM memory utilization. [OIDs: 1.3.6.1.4.1.3375.2.1.1.2.1.44.0, 1.3.6.1.4.1.3375.2.1.1.2.1.45.0]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameF5-LB System Memory Utilization
    Unit%

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    Filter
    Warning OperatorGREATER_THAN_EQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold850-100
    Warning Repeat Count21-12
    Critical OperatorGREATER_THAN_EQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold900-100
    Critical Repeat Count21-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    F5 LB TMM Memory Utiliztion

    F5 LB TMM Memory Utiliztion

    f5lb.system.uptime

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.3375.2.1.6.6.0
    ExpressionsysSystemUptime/100
    DescriptionProvides the F5 Load Balancer system up time in seconds since boot. [OIDs: 1.3.6.1.4.1.3375.2.1.6.6.0, 1.3.6.1.4.1.3375.2.1.6.1.0]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameF5-LB System Uptime
    Units

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    Filter
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical OperatorLESS_THAN_EQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold18000 - 4294967295
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    Uptime

    Uptime

    f5lb.system.host.disk.util

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.3375.2.1.7.3.2.1.3, 1.3.6.1.4.1.3375.2.1.7.3.2.1.4, 1.3.6.1.4.1.3375.2.1.7.3.2.1.2
    Expression((sysHostDiskTotalBlocks-sysHostDiskFreeBlocks)/sysHostDiskTotalBlocks)*100
    DescriptionProvides F5 Load Balancer percentage of space used on disk. [OIDs: 1.3.6.1.4.1.3375.2.1.7.3.2.1.1, 1.3.6.1.4.1.3375.2.1.7.3.2.1.3, 1.3.6.1.4.1.3375.2.1.7.3.2.1.4]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameF5-LB System Host Disk Utilization
    Unit%

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    FilterNULLNot Applicable
    Warning OperatorGREATER_THAN_EQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold850-100
    Warning Repeat Count11-12
    Critical OperatorGREATER_THAN_EQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold900-100
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    F5 LB System Host Disk Utilization

    F5 LB System Host Disk Utilization

    f5lb.system.host.filenode.util

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.3375.2.1.7.3.2.1.5, 1.3.6.1.4.1.3375.2.1.7.3.2.1.6
    Expression((sysHostDiskTotalNodes-sysHostDiskFreeNodes)/sysHostDiskTotalNodes)*100
    DescriptionProvides F5 Load Balancer disk file node utilization.
    [OIDs: 1.3.6.1.4.1.3375.2.1.7.3.2.1.1,1.3.6.1.4.1.3375.2.1.7.3.2.1.5, 1.3.6.1.4.1.3375.2.1.7.3.2.1.6]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameF5-LB System Host Disk Utilization
    Unit%

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    FilterNULLNot Applicable
    Warning OperatorGREATER_THAN_EQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold850-100
    Warning Repeat Count11-12
    Critical OperatorGREATER_THAN_EQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold900-100
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    F5 LB System Host Disk File Node Utilization

    F5 LB System Host Disk File Node Utilization

    f5lb.cluster.avail.state

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.3375.2.1.10.1.2.1.2, 1.3.6.1.4.1.3375.2.1.10.1.2.1.10
    Expressionif((sysClusterEnabled==1),sysClusterAvailabilityState,-1)
    DescriptionMonitors the state of the specified cluster availability indicated in color. [OIDs: 1.3.6.1.4.1.3375.2.1.10.1.2.1.1, 1.3.6.1.4.1.3375.2.1.10.1.2.1.2, 1.3.6.1.4.1.3375.2.1.10.1.2.1.10]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameF5-LB Cluster State
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    FilterNULLNot Applicable
    Warning OperatorEQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold2-1 to 4
    Warning Repeat Count11-12
    Critical OperatorEQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold3-1 to 4
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    f5lb.cluster.ha.state

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.3375.2.1.10.1.2.1.14
    Expressionif((sysClusterEnabled==1),sysClusterHaState,-1)
    DescriptionMonitors the state of high availability action. [OIDs: 1.3.6.1.4.1.3375.2.1.10.1.2.1.1, 1.3.6.1.4.1.3375.2.1.10.1.2.1.2, 1.3.6.1.4.1.3375.2.1.10.1.2.1.14]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameF5-LB Cluster State
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical OperatorEQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold0-1 to 4
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph