Description

Applicable on Fiber channel SAN switches like HP Storage Works 2000 Modular Smart Array or Brocade or Qlogic SAN devices. Monitors the Status of connection unit, sensors and ports.

Prerequisites

SNMP should be enabled in end device and device should support FCMGMT-MIB OIDs and SNMP credentials should be attached against the device in portal.

How to Apply: This template is All instance selection based. It will not ask user to select any instance(s) while assigning it to a device.

Metric Parameters

Metric Parameters
ParameterDescription
Frequency
  • Frequency is the interval in which you want to probe and collect metric data from the target device/resource
  • Frequency is defined in minutes (min).
  • Warning ThresholdIf the metric value satisfies the condition defined along with Warning Threshold value, then a notification is sent to the user.
    Critical ThresholdIf the metric value satisfies the condition defined along with Critical Threshold value, then a notification is sent to the user.
    AlertThe alert value can be set to either Yes or No. If it is Yes, then an alert message is sent to the user.

    Metrics

    fiberchannel.connection.unit.portstatus

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.3.94.1.10.1.15,
    1.3.6.1.3.94.1.10.1.6, 1.3.6.1.3.94.1.10.1.7
    ExpressionconnUnitPortStatus
    DescriptionMonitors the overall protocol status for the port. Possible values are 1- unknown, 2- unused, 3- ready, 4- warning, 5- failure, 6- notparticipating, 7- initializing, 8- bypass, 9- ols.
    [OIDs: 1.3.6.1.3.94.1.10.1.2, 1.3.6.1.3.94.1.10.1.15, 1.3.6.1.3.94.1.10.1.6, 1.3.6.1.3.94.1.10.1.7]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameFiber Channel Connection Unit Port
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    FilterNULLNot Applicable
    Warning OperatorEQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold4[{"1":"unknown"},{"2":"unused"},{"3":"ready"},{"4":"warning"},{"5":"failure"},{"6":"notparticipating"},{"7":"initializing"},{"8":"bypass"},{"9":"ols"}]
    Warning Repeat Count11-12
    Critical OperatorEQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold5[{"1":"unknown"},{"2":"unused"},{"3":"ready"},{"4":"warning"},{"5":"failure"},{"6":"notparticipating"},{"7":"initializing"},{"8":"bypass"},{"9":"ols"}]
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    Connection Unit Port Status

    Connection Unit Port Status

    fiberchannel.connection.unit.porthwstate

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.3.94.1.10.1.23
    ExpressionNULL
    DescriptionMonitors the hardware detected state of the port. Possible values are 1- unknown, 2- failed, 3- bypassed, 4- active, 5- loopback, 6- txfault, 7- noMedia, 8- linkDown. [OIDs: 1.3.6.1.3.94.1.10.1.2, 1.3.6.1.3.94.1.10.1.15, 1.3.6.1.3.94.1.10.1.7, 1.3.6.1.3.94.1.10.1.23]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameFiber Channel Connection Unit Port
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    FilterNULLNot Applicable
    Warning OperatorEQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold8[{"1":"unknown"},{"2":"failed"},{"3":"bypassed"},{"4":"active"},{"5":"loopback"},{"6":"txfault"},{"7":"noMedia"},{"8":"linkDown"}]
    Warning Repeat Count11-12
    Critical OperatorEQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold2[{"1":"unknown"},{"2":"failed"},{"3":"bypassed"},{"4":"active"},{"5":"loopback"},{"6":"txfault"},{"7":"noMedia"},{"8":"linkDown"}]
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)NoYes/No

    Sample Output

    No graph

    fiberchannel.connection.unit.sensorstatus

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.3.94.1.8.1.4,
    1.3.6.1.3.94.1.8.1.1, 1.3.6.1.3.94.1.8.1.6
    ExpressionconnUnitSensorStatus
    DescriptionMonitors the status indicated by the sensor. Possible values are 1- unknown, 2- other, 3- ok, 4- warning, 5- failed. [OIDs: 1.3.6.1.3.94.1.8.1.4, 1.3.6.1.3.94.1.8.1.1, 1.3.6.1.3.94.1.8.1.3, 1.3.6.1.3.94.1.8.1.6]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameFiber Channel Connection Unit Sensor Status
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    FilterNULLNot Applicable
    Warning OperatorEQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold4[{"1":"unknown"},{"2":"other"},{"3":"ok"},{"4":"warning"},{"5":"failed"}]
    Warning Repeat Count11-12
    Critical OperatorEQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold5[{"1":"unknown"},{"2":"other"},{"3":"ok"},{"4":"warning"},{"5":"failed"}]
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    Connection Unit Sensor Status

    Connection Unit Sensor Status

    fiberchannel.connection.unit.status

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.3.94.1.6.1.6
    ExpressionNULL
    DescriptionMonitors the Overall status of the connectivity unit. The goal of this object is to be the single poll point to check the status of the connunit. Possible values are 1- unknown, 2- unused, 3- ok, 4- warning, 5- failed. [OIDs: 1.3.6.1.3.94.1.6.1.20, 1.3.6.1.3.94.1.6.1.6]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameFiber Channel Connection Unit Status
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    FilterNULLNot Applicable
    Warning OperatorEQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold4[{"1":"unknown"},{"2":"unused"},{"3":"ok"},{"4":"warning"},{"5":"failed"}]
    Warning Repeat Count11-12
    Critical OperatorEQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold5[{"1":"unknown"},{"2":"unused"},{"3":"ok"},{"4":"warning"},{"5":"failed"}]
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    Connection Unit Status

    Connection Unit Status