Description
Applicable on all Fiber channel devices that support the FIBER-CHANNEL-FE-MIB. Monitors the status of the fiber channel modules, port statistics like traffic rate on the port fiber elements, port status, etc.
Prerequisites
SNMP should be enabled in end device and device should support FIBRE-CHANNEL-FE-MIB OIDs and SNMP credentials should be attached against the device in portal.
How to Apply: This template is All instance selection based. It will not ask user to select any instance(s) while assigning it to a device.
Metric Parameters
Parameter | Description |
---|---|
Frequency | Warning Threshold | If the metric value satisfies the condition defined along with Warning Threshold value, then a notification is sent to the user. |
Critical Threshold | If the metric value satisfies the condition defined along with Critical Threshold value, then a notification is sent to the user. |
Alert | The alert value can be set to either Yes or No. If it is Yes, then an alert message is sent to the user. |
Metrics
fiberchannel.module.status
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.2.1.75.1.1.4.1.4 |
Expression | NULL |
Description | Monitors the operational status of the fiber channel fabric element module. Possible values are 1- online: the module is functioning properly, 2- offline: the module is not available, 3- testing: the module is under testing and 4- faulty: the module is defective in some way. [OIDs: 1.3.6.1.2.1.75.1.1.4.1.2, 1.3.6.1.2.1.75.1.1.4.1.4] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Fiber channel FE Module Status |
Unit |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | 1 – 1440 (mins) |
Filter | NULL | Not Applicable |
Warning Operator | EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Warning Threshold | 3 | [{"1":"online"},{"2":"offline"},{"3":"testing"},{"4":"faulty"}] |
Warning Repeat Count | 1 | 1-12 |
Critical Operator | EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 4 | [{"1":"online"},{"2":"offline"},{"3":"testing"},{"4":"faulty"}] |
Critical Repeat Count | 1 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
fiberchannel.port.status
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.2.1.75.1.2.2.1.1, 1.3.6.1.2.1.75.1.2.2.1.2 |
Expression | if((fcFxPortPhysAdminStatus==1),fcFxPortPhysOperStatus,0) |
Description | Monitors the operational status of fiber channel port. [OIDs: 1.3.6.1.2.1.75.1.1.5.1.2, 1.3.6.1.2.1.75.1.2.2.1.1, 1.3.6.1.2.1.75.1.2.2.1.2] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Fiber Channel FE Port Stats |
Unit |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | 1 – 1440 (mins) |
Filter | NULL | Not Applicable |
Warning Operator | EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Warning Threshold | 3 | [{"0":"adminDown"},{"1":"online"},{"2":"offline"},{"3":"testing"},{"4":"linkFailure"}] |
Warning Repeat Count | 1 | 1-12 |
Critical Operator | IN_LIST | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 2,4 | [{"0":"adminDown"},{"1":"online"},{"2":"offline"},{"3":"testing"},{"4":"linkFailure"}] |
Critical Repeat Count | 1 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
fiberchannel.port.linkfailures
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.2.1.75.1.3.1.1.1 |
Expression | if((fiberchannel.port.status==1),fcFxPortLinkFailures,0) |
Description | Monitors the number of link failures detected by this FxPort. [OID: 1.3.6.1.2.1.75.1.3.1.1.1] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Fiber Channel FE Port Stats |
Unit | psec |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | 1 – 1440 (mins) |
Filter | NULL | Not Applicable |
Warning Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Warning Threshold | 100 | 0 - 4294967295 |
Warning Repeat Count | 1 | 1-12 |
Critical Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 200 | 0 - 4294967295 |
Critical Repeat Count | 1 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
fiberchannel.port.synclosses
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.2.1.75.1.3.1.1.2 |
Expression | if((fiberchannel.port.status==1),fcFxPortSyncLosses,0) |
Description | Monitors the number of loss of synchronization detected by the FxPort. [OID: 1.3.6.1.2.1.75.1.3.1.1.2] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Fiber Channel FE Port Stats |
Unit | psec |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | 1 – 1440 (mins) |
Filter | NULL | Not Applicable |
Warning Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Warning Threshold | 100 | 0 - 4294967295 |
Warning Repeat Count | 1 | 1-12 |
Critical Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 200 | 0 - 4294967295 |
Critical Repeat Count | 1 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
fiberchannel.port.siglosses
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.2.1.75.1.3.1.1.3 |
Expression | if((fiberchannel.port.status==1),fcFxPortSigLosses,0) |
Description | Monitors the number of loss of signal detected by the FxPort. [OID: 1.3.6.1.2.1.75.1.3.1.1.3] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Fiber Channel FE Port Stats |
Unit | psec |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | 1 – 1440 (mins) |
Filter | NULL | Not Applicable |
Warning Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Warning Threshold | 100 | 0 - 4294967295 |
Warning Repeat Count | 1 | 1-12 |
Critical Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 200 | 0 - 4294967295 |
Critical Repeat Count | 1 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
fiberchannel.port.invalidcrc
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.2.1.75.1.3.1.1.6 |
Expression | if((fiberchannel.port.status==1),fcFxPortInvalidCrcs,0) |
Description | Monitors the number of invalid CRC detected by this FxPort. [OID: 1.3.6.1.2.1.75.1.3.1.1.6] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Fiber Channel FE Port Stats |
Unit | psec |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | 1 – 1440 (mins) |
Filter | NULL | Not Applicable |
Warning Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Warning Threshold | 100 | 0 - 4294967295 |
Warning Repeat Count | 1 | 1-12 |
Critical Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 200 | 0 - 4294967295 |
Critical Repeat Count | 1 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
fiberchannel.port.invalidtxwords
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.2.1.75.1.3.1.1.5 |
Expression | if((fiberchannel.port.status==1),fcFxPortInvalidTxWords,0) |
Description | Monitors the number of invalid transmission word detected by the FxPort. [OID: 1.3.6.1.2.1.75.1.3.1.1.5] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Fiber Channel FE Port Stats |
Unit | psec |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | 1 – 1440 (mins) |
Filter | NULL | Not Applicable |
Warning Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Warning Threshold | 100 | 0 - 4294967295 |
Warning Repeat Count | 1 | 1-12 |
Critical Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 200 | 0 - 4294967295 |
Critical Repeat Count | 1 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
fiberchannel.port.offlineseq.in
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.2.1.75.1.3.1.1.11 |
Expression | if((fiberchannel.port.status==1),fcFxPortOlsIns,0) |
Description | Monitors the number of Offline Sequence received by this FxPort. [OID: 1.3.6.1.2.1.75.1.3.1.1.11] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Fiber Channel FE Port Stats |
Unit | psec |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | 1 – 1440 (mins) |
Filter | NULL | Not Applicable |
Warning Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Warning Threshold | 100 | 0 - 4294967295 |
Warning Repeat Count | 1 | 1-12 |
Critical Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 200 | 0 - 4294967295 |
Critical Repeat Count | 1 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
fiberchannel.port.offlineseq.out
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.2.1.75.1.3.1.1.12 |
Expression | if((fiberchannel.port.status==1),fcFxPortOlsOuts,0) |
Description | Monitors the number of Offline Sequence issued by this FxPort. [OID: 1.3.6.1.2.1.75.1.3.1.1.12] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Fiber Channel FE Port Stats |
Unit | psec |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | 1 – 1440 (mins) |
Filter | NULL | Not Applicable |
Warning Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Warning Threshold | 100 | 0 - 4294967295 |
Warning Repeat Count | 1 | 1-12 |
Critical Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 200 | 0 - 4294967295 |
Critical Repeat Count | 1 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
fiberchannel.port.c3frames.in
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.2.1.75.1.4.3.1.1 |
Expression | if((fiberchannel.port.status==1),fcFxPortC3InFrames,0) |
Description | Monitors the number of Class 3 frames received by this FxPort from its attached NxPort. [OID: 1.3.6.1.2.1.75.1.4.3.1.1] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Fiber Channel FE Port Stats |
Unit | psec |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | 1 – 1440 (mins) |
Filter | NULL | Not Applicable |
Warning Operator | ||
Warning Threshold | ||
Warning Repeat Count | ||
Critical Operator | ||
Critical Threshold | ||
Critical Repeat Count | ||
Alert | No | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
fiberchannel.port.c3frames.out
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.2.1.75.1.4.3.1.2 |
Expression | if((fiberchannel.port.status==1),fcFxPortC3OutFrames,0) |
Description | Monitors the number of Class 3 frames delivered through this FxPort to its attached NxPort. [OID: 1.3.6.1.2.1.75.1.4.3.1.2] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Fiber Channel FE Port Stats |
Unit | psec |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | 1 – 1440 (mins) |
Filter | NULL | Not Applicable |
Warning Operator | ||
Warning Threshold | ||
Warning Repeat Count | ||
Critical Operator | ||
Critical Threshold | ||
Critical Repeat Count | ||
Alert | No | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
fiberchannel.port.c3frame.discards
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.2.1.75.1.4.3.1.5 |
Expression | if((fiberchannel.port.status==1),fcFxPortC3Discards,0) |
Description | Monitors number of Class 3 frames discarded by this FxPort. [OID: 1.3.6.1.2.1.75.1.4.3.1.5] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Fiber Channel FE Port Stats |
Unit | psec |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | 1 – 1440 (mins) |
Filter | NULL | Not Applicable |
Warning Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Warning Threshold | 100 | 0 - 4294967295 |
Warning Repeat Count | 1 | 1-12 |
Critical Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 200 | 0 - 4294967295 |
Critical Repeat Count | 1 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
fiberchannel.port.available.buffers
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.2.1.75.1.2.1.1.2 |
Expression | NULL |
Description | Monitors the number of buffers currently available for receiving frames from the attached port in the buffer-to-buffer flow control. [OID: 1.3.6.1.2.1.75.1.2.1.1.2] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Fiber Channel FE Port Stats |
Unit |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | 1 – 1440 (mins) |
Filter | NULL | Not Applicable |
Warning Operator | ||
Warning Threshold | ||
Warning Repeat Count | ||
Critical Operator | ||
Critical Threshold | ||
Critical Repeat Count | ||
Alert | No | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
fiberchannel.fabric.modules.max
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.2.1.75.1.1.3.0 |
Expression | NULL |
Description | Monitors the maximum number of modules in the Fabric Element, regardless of their current state. [OIDs: 1.3.6.1.2.1.75.1.1.1.0, 1.3.6.1.2.1.75.1.1.2.0, 1.3.6.1.2.1.75.1.1.3.0] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Fiber Channel Max FE Modules |
Unit |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 60 | 1 – 1440 (mins) |
Filter | ||
Warning Operator | ||
Warning Threshold | ||
Warning Repeat Count | ||
Critical Operator | ||
Critical Threshold | ||
Critical Repeat Count | ||
Alert | No | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output