Description
Template for Fortinet Fortigate firewall based - specific applications - such as FM (fortiManager) and FA (FortiAnalyzer).
Prerequisites
SNMP should be enabled in end device and device should support FORTINET-FORTIGATE-FORTIANALYZER-MIB OIDs and SNMP credentials should be attached against the device in portal.
Metric Parameters
Parameter | Description |
---|---|
Frequency | Warning Threshold | If the metric value satisfies the condition defined along with Warning Threshold value, then a notification is sent to the user. |
Critical Threshold | If the metric value satisfies the condition defined along with Critical Threshold value, then a notification is sent to the user. |
Alert | The alert value can be set to either Yes or No. If it is Yes, then an alert message is sent to the user. |
Metrics
fortimanager.system.cpu.utilization
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.12356.103.2.1.1.0 |
Expression | NULL |
Description | This monitor provides the current CPU utilization in percentage. Alert is generated when the utilization exceeds the given threshold. [OID : 1.3.6.1.4.1.12356.103.2.1.1] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Fortinet FortiManager Performance Monitors |
Unit | % |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 5 | 1 – 1440 (mins) |
Filter | ||
Warning Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Warning Threshold | 85 | 0-100 |
Warning Repeat Count | 3 | 1-12 |
Critical Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 90 | 0-100 |
Critical Repeat Count | 3 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
fortimanager.system.disk.utilization
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.12356.103.2.1.4.0, 1.3.6.1.4.1.12356.103.2.1.5.0 |
Expression | (fmSysDiskUsage / fmSysDiskCapacity) * 100 |
Description | This monitor provides the current disk utilization from the total hard disk capacity in percentage. Alert is generated when the utilization exceeds the threshold percentage. [OID : 1.3.6.1.4.1.12356.103.2.1.4, 1.3.6.1.4.1.12356.103.2.1.5] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Fortinet FortiManager Performance Monitors |
Unit | % |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 5 | 1 – 1440 (mins) |
Filter | ||
Warning Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Warning Threshold | 90 | 0-100 |
Warning Repeat Count | 3 | 1-12 |
Critical Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 95 | 0-100 |
Critical Repeat Count | 3 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
fortimanager.system.memory.utilization
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.12356.103.2.1.2.0, 1.3.6.1.4.1.12356.103.2.1.3.0 |
Expression | (fmSysMemUsed / fmSysMemCapacity) * 100 |
Description | This monitor provides the current memory utilization from the total physical and swap memory installed in percentage. Alert is generated when the utilization exceeds the threshold percentage. [OID : 1.3.6.1.4.1.12356.103.2.1.2, 1.3.6.1.4.1.12356.103.2.1.3] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Fortinet FortiManager Performance Monitors |
Unit | % |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 5 | 1 – 1440 (mins) |
Filter | ||
Warning Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Warning Threshold | 85 | 0-100 |
Warning Repeat Count | 3 | 1-12 |
Critical Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 90 | 0-100 |
Critical Repeat Count | 3 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output