Description
Template to monitor Fortinet Fortigate Firewall System performance parameters like CPU utilization, Memory util!ization, Disk utilization, Active Sessions and Low Memory Utilization. This template is created on FORTINET-FORTIGATE-MIB OIDs and validated on FGT_301E [SysObjId: 1.3.6.1.4.1.12356.101.1.3008].
Prerequisites
SNMP should be enabled in end device and device should support FORTINET-FORTIGATE-MIB and SNMP credentials should be attached against the device in portal.
Metric Parameters
Parameter | Description |
---|---|
Frequency | Warning Threshold | If the metric value satisfies the condition defined along with Warning Threshold value, then a notification is sent to the user. |
Critical Threshold | If the metric value satisfies the condition defined along with Critical Threshold value, then a notification is sent to the user. |
Alert | The alert value can be set to either Yes or No. If it is Yes, then an alert message is sent to the user. |
Metrics
fortinet.fortigate.cpu.utilization
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.12356.101.4.1.3.0 |
Expression | NULL |
Description | Provides the Fortinet Fortigate CPU Utilization percentage [OID: 1.3.6.1.4.1.12356.101.4.1.3.0] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Fortinet Fortigate Performance Monitors - Ext |
Unit | % |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 5 | 1 – 1440 (mins) |
Filter | ||
Warning Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Warning Threshold | 80 | 0-100 |
Warning Repeat Count | 3 | 1-12 |
Critical Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 90 | 0-100 |
Critical Repeat Count | 3 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
fortinet.fortigate.memory.utilization
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.12356.101.4.1.5.0, 1.3.6.1.4.1.12356.101.4.1.4.0 |
Expression | fgSysMemUsage |
Description | Provides the Fortinet Fortigate current memory utilization (percentage) and total physical memory (RAM) installed (KB) [OID: 1.3.6.1.4.1.12356.101.4.1.4.0, 1.3.6.1.4.1.12356.101.4.1.5.0] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Fortinet Fortigate Performance Monitors - Ext |
Unit | % |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 5 | 1 – 1440 (mins) |
Filter | ||
Warning Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Warning Threshold | 80 | 0-100 |
Warning Repeat Count | 3 | 1-12 |
Critical Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 90 | 0-100 |
Critical Repeat Count | 3 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
fortinet.fortigate.disk.utilization
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.12356.101.4.1.6.0, 1.3.6.1.4.1.12356.101.4.1.7.0 |
Expression | (fgSysDiskUsage / fgSysDiskCapacity) * 100 |
Description | Provides the Fortinet Fortigate total hard disk capacity (MB), if disk is present and current hard disk usage (MB) and disk utilization percentage [ OID: 1.3.6.1.4.1.12356.101.4.1.7.0, 1.3.6.1.4.1.12356.101.4.1.6.0] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Fortinet Fortigate Performance Monitors - Ext |
Unit | % |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 5 | 1 – 1440 (mins) |
Filter | ||
Warning Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Warning Threshold | 80 | 0-100 |
Warning Repeat Count | 3 | 1-12 |
Critical Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 90 | 0-100 |
Critical Repeat Count | 3 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
fortinet.fortigate.sessions.count
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.12356.101.4.1.8.0 |
Expression | NULL |
Description | It represents the number of active sessions on the device. [FORTINET-FORTIGATE-MIB::fgSysSesCount.0 - 1.3.6.1.4.1.12356.101.4.1.8.0] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Fortinet Fortigate Performance Monitors - Ext |
Unit |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 5 | 1 – 1440 (mins) |
Filter | ||
Warning Operator | ||
Warning Threshold | ||
Warning Repeat Count | ||
Critical Operator | ||
Critical Threshold | ||
Critical Repeat Count | ||
Alert | No | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
fortinet.fortigate.low.memory.utilization
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.12356.101.4.1.10.0, 1.3.6.1.4.1.12356.101.4.1.9.0 |
Expression | fgSysLowMemUsage |
Description | It represents current lowmem utilization (percentage). Lowmem is memory available for the kernel's own data structures and kernel specific tables. The system can get into a bad state if it runs out of lowmem. [FORTINET-FORTIGATE-MIB::fgSysLowMemUsage.0 - 1.3.6.1.4.1.12356.101.4.1.9.0, fgSysLowMemCapacity.0 - 1.3.6.1.4.1.12356.101.4.1.10.0] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Fortinet Fortigate Performance Monitors - Ext |
Unit | % |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 5 | 1 – 1440 (mins) |
Filter | ||
Warning Operator | GREATER_THAN | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Warning Threshold | 60 | 0-100 |
Warning Repeat Count | 3 | 1-12 |
Critical Operator | GREATER_THAN | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 80 | 0-100 |
Critical Repeat Count | 3 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph