Description
Monitors storage processors. This Template is applicable for storage processor.
Prerequisites
Resource should be added using integration to apply storage specific templates.
How to Apply: This template is All instance selection based. It will not ask user to select any instance (s) while assigning it to a device.
Metric Parameters
| Parameter | Description |
|---|---|
| Frequency | |
| Warning Threshold | If the metric value satisfies the condition defined along with Warning Threshold value, then a notification is sent to the user. |
| Critical Threshold | If the metric value satisfies the condition defined along with Critical Threshold value, then a notification is sent to the user. |
| Alert | The alert value can be set to either Yes or No. If it is Yes, then an alert message is sent to the user. |
Metrics
emc.clariion.storageprocessor.prctbusy
Metric Details
| Applicable for | Device |
| Description | Indicates percent utilization of the storage processor. Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getall -sp |
| Category | EMC CLARiiON |
| Collector Type | Gateway |
| Monitor Name | G2 - EMC Clariion Storage Processor Monitor |
| Unit | % |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 15 | Manual |
| Filter | NULL | Not Applicable |
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | ||
| Critical Threshold | ||
| Critical Repeat Count | ||
| Alert | No | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
emc.clariion.storageprocessor.prctidle
Metric Details
| Applicable for | Device |
| Description | Indicates the percentage of time the storage processor was idle. Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getall -sp |
| Category | EMC CLARiiON |
| Collector Type | Gateway |
| Monitor Name | G2 - EMC Clariion Storage Processor Monitor |
| Unit | % |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 15 | Manual |
| Filter | NULL | Not Applicable |
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | ||
| Critical Threshold | ||
| Critical Repeat Count | ||
| Alert | No | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
emc.clariion.storageprocessor.totalthroughput
Metric Details
| Applicable for | Device |
| Description | Average number of requests that are passed through the storage processor per second. Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getall -sp |
| Category | EMC CLARiiON |
| Collector Type | Gateway |
| Monitor Name | G2 - EMC Clariion Storage Processor Monitor |
| Unit | psec |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 15 | Manual |
| Filter | NULL | Not Applicable |
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | ||
| Critical Threshold | ||
| Critical Repeat Count | ||
| Alert | No | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
emc.clariion.storageprocessor.readthroughput
Metric Details
| Applicable for | Device |
| Description | Average number of read requests that are passed through the storage processor per second. Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getall -sp |
| Category | EMC CLARiiON |
| Collector Type | Gateway |
| Monitor Name | G2 - EMC Clariion Storage Processor Monitor |
| Unit | psec |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 15 | Manual |
| Filter | NULL | Not Applicable |
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | ||
| Critical Threshold | ||
| Critical Repeat Count | ||
| Alert | No | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
emc.clariion.storageprocessor.writethroughput
Metric Details
| Applicable for | Device |
| Description | Average number of write requests that are passed through the storage processor per second. Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getall -sp |
| Category | EMC CLARiiON |
| Collector Type | Gateway |
| Monitor Name | G2 - EMC Clariion Storage Processor Monitor |
| Unit | psec |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 15 | Manual |
| Filter | NULL | Not Applicable |
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | ||
| Critical Threshold | ||
| Critical Repeat Count | ||
| Alert | No | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
emc.clariion.storageprocessor.status
Metric Details
| Applicable for | Device |
| Description | Status of the Storage Processor. Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getcrus -spa/-spb |
| Category | EMC CLARiiON |
| Collector Type | Gateway |
| Monitor Name | G2 - EMC Clariion Storage Processor Monitor |
| Unit | NULL |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 15 | Manual |
| Filter | NULL | Not Applicable |
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | ||
| Critical Threshold | ||
| Critical Repeat Count | ||
| Alert | No | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
emc.clariion.storageprocessor.readcachestate
Metric Details
| Applicable for | Device |
| Description | Storage Processor Read Cache state. Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getall -sp |
| Category | EMC CLARiiON |
| Collector Type | Gateway |
| Monitor Name | G2 - EMC Clariion Storage Processor Monitor |
| Unit | NULL |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 15 | Manual |
| Filter | NULL | Not Applicable |
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | ||
| Critical Threshold | ||
| Critical Repeat Count | ||
| Alert | No | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
emc.clariion.storageprocessor.writecachestate
Metric Details
| Applicable for | Device |
| Description | Storage Processor Write Cache state. Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getall -sp |
| Category | EMC CLARiiON |
| Collector Type | Gateway |
| Monitor Name | G2 - EMC Clariion Storage Processor Monitor |
| Unit | NULL |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 15 | Manual |
| Filter | NULL | Not Applicable |
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | ||
| Critical Threshold | ||
| Critical Repeat Count | ||
| Alert | No | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
emc.clariion.storageprocessor.cablestatus
Metric Details
| Applicable for | Device |
| Description | Storage Processor Cabling status. Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getcrus -cablingspsa/-cablingspsb |
| Category | EMC CLARiiON |
| Collector Type | Gateway |
| Monitor Name | G2 - EMC Clariion Storage Processor Monitor |
| Unit | NULL |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 15 | Manual |
| Filter | NULL | Not Applicable |
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | ||
| Critical Threshold | ||
| Critical Repeat Count | ||
| Alert | No | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
emc.clariion.storageprocessor.cpustatus
Metric Details
| Applicable for | Device |
| Description | Storage Processor CPU status. Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getcrus -cpua/-cpub |
| Category | EMC CLARiiON |
| Collector Type | Gateway |
| Monitor Name | G2 - EMC Clariion Storage Processor Monitor |
| Unit | NULL |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 15 | Manual |
| Filter | NULL | Not Applicable |
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | ||
| Critical Threshold | ||
| Critical Repeat Count | ||
| Alert | No | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
emc.clariion.storageprocessor.fanstatus
Metric Details
| Applicable for | Device |
| Description | Storage Processor Fan status. Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getcrus -fana/-fanb |
| Category | EMC CLARiiON |
| Collector Type | Gateway |
| Monitor Name | G2 - EMC Clariion Storage Processor Monitor |
| Unit | NULL |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 15 | Manual |
| Filter | NULL | Not Applicable |
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | ||
| Critical Threshold | ||
| Critical Repeat Count | ||
| Alert | No | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
emc.clariion.storageprocessor.lccstatus
Metric Details
| Applicable for | Device |
| Description | Storage Processor link control card status. Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getcrus -lcca/-lccb |
| Category | EMC CLARiiON |
| Collector Type | Gateway |
| Monitor Name | G2 - EMC Clariion Storage Processor Monitor |
| Unit | NULL |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 15 | Manual |
| Filter | NULL | Not Applicable |
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | ||
| Critical Threshold | ||
| Critical Repeat Count | ||
| Alert | No | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
emc.clariion.storageprocessor.spsstatus
Metric Details
| Applicable for | Device |
| Description | Storage Processor standby power supply status. Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getcrus -spsa/-spsb |
| Category | EMC CLARiiON |
| Collector Type | Gateway |
| Monitor Name | G2 - EMC Clariion Storage Processor Monitor |
| Unit | NULL |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 15 | Manual |
| Filter | NULL | Not Applicable |
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | ||
| Critical Threshold | ||
| Critical Repeat Count | ||
| Alert | No | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
emc.clariion.storageprocessor.powerstatus
Metric Details
| Applicable for | Device |
| Description | Storage Processor power status. Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getcrus -all |
| Category | EMC CLARiiON |
| Collector Type | Gateway |
| Monitor Name | G2 - EMC Clariion Storage Processor Monitor |
| Unit | NULL |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 15 | Manual |
| Filter | NULL | Not Applicable |
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | ||
| Critical Threshold | ||
| Critical Repeat Count | ||
| Alert | No | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
emc.clariion.storageprocessor.fault-led-status
Metric Details
| Applicable for | Device |
| Description | Status of fault LED. Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getall -sp |
| Category | EMC CLARiiON |
| Collector Type | Gateway |
| Monitor Name | G2 - EMC Clariion Storage Processor Monitor |
| Unit | NULL |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 15 | Manual |
| Filter | NULL | Not Applicable |
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | ||
| Critical Threshold | ||
| Critical Repeat Count | ||
| Alert | No | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
emc.clariion.storageprocessor.statistics-logging-status
Metric Details
| Applicable for | Device |
| Description | Status of Statistics Logging. This serve for performance monitoring. Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getall -sp |
| Category | EMC CLARiiON |
| Collector Type | Gateway |
| Monitor Name | G2 - EMC Clariion Storage Processor Monitor |
| Unit | NULL |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 15 | Manual |
| Filter | NULL | Not Applicable |
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | ||
| Critical Threshold | ||
| Critical Repeat Count | ||
| Alert | No | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
emc.clariion.storageprocessor.responsetime
Metric Details
| Applicable for | Device |
| Description | Amount of time it takes for a storage processor to process an input-output request. Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getall -sp. Formula : Response time : 1000 * (Queue length/throughput) |
| Category | EMC CLARiiON |
| Collector Type | Gateway |
| Monitor Name | G2 - EMC Clariion Storage Processor Monitor |
| Unit | ms |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 15 | Manual |
| Filter | NULL | Not Applicable |
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | ||
| Critical Threshold | ||
| Critical Repeat Count | ||
| Alert | No | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
emc.clariion.storageprocessor.totalwrites
Metric Details
| Applicable for | Device |
| Description | Number of write operations performed by the storage processor. Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getall -sp |
| Category | EMC CLARiiON |
| Collector Type | Gateway |
| Monitor Name | G2 - EMC Clariion Storage Processor Monitor |
| Unit | NULL |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 15 | Manual |
| Filter | NULL | Not Applicable |
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | ||
| Critical Threshold | ||
| Critical Repeat Count | ||
| Alert | No | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
emc.clariion.storageprocessor.totalreads
Metric Details
| Applicable for | Device |
| Description | Number of read operations to the storage processor. Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getall -sp |
| Category | EMC CLARiiON |
| Collector Type | Gateway |
| Monitor Name | G2 - EMC Clariion Storage Processor Monitor |
| Unit | NULL |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 15 | Manual |
| Filter | NULL | Not Applicable |
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | ||
| Critical Threshold | ||
| Critical Repeat Count | ||
| Alert | No | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
emc.clariion.storageprocessor.servicetime
Metric Details
| Applicable for | Device |
| Description | The total time spent to serve the request. Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getall -sp. Formula : Service time = 1000 * (Utilization/throughput) |
| Category | EMC CLARiiON |
| Collector Type | Gateway |
| Monitor Name | G2 - EMC Clariion Storage Processor Monitor |
| Unit | ms |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 15 | Manual |
| Filter | NULL | Not Applicable |
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | ||
| Critical Threshold | ||
| Critical Repeat Count | ||
| Alert | No | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
emc.clariion.storageprocessor.blocksread
Metric Details
| Applicable for | Device |
| Description | Number of blocks transferred for read operations. Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getall -sp |
| Category | EMC CLARiiON |
| Collector Type | Gateway |
| Monitor Name | G2 - EMC Clariion Storage Processor Monitor |
| Unit | NULL |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 15 | Manual |
| Filter | NULL | Not Applicable |
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | ||
| Critical Threshold | ||
| Critical Repeat Count | ||
| Alert | No | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
emc.clariion.storageprocessor.blockswritten
Metric Details
| Applicable for | Device |
| Description | Number of blocks transferred for write operations. Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getall -sp |
| Category | EMC CLARiiON |
| Collector Type | Gateway |
| Monitor Name | G2 - EMC Clariion Storage Processor Monitor |
| Unit | NULL |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 15 | Manual |
| Filter | NULL | Not Applicable |
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | ||
| Critical Threshold | ||
| Critical Repeat Count | ||
| Alert | No | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
emc.clariion.storageprocessor.averagebusy-queuelength
Metric Details
| Applicable for | Device |
| Description | The average number of outstanding requests. Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getall -sp. Formula : Average Busy Queue Length : (Sum Queue Lengths - (Number arrivals With Non Zero Queue / 2)) / (Read Throughput [IO/s] + Write Throughput [IO/s]) |
| Category | EMC CLARiiON |
| Collector Type | Gateway |
| Monitor Name | G2 - EMC Clariion Storage Processor Monitor |
| Unit | NULL |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 15 | Manual |
| Filter | NULL | Not Applicable |
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | ||
| Critical Threshold | ||
| Critical Repeat Count | ||
| Alert | No | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph