Description
Monitors LUNs. This template is applicable for storage array LUN.
Prerequisites
Resource should be added using integration to apply storage specific templates.
How to Apply: This template is All instance selection based. It will not ask user to select any instance (s) while assigning it to a device.
Metric Parameters
| Parameter | Description |
|---|---|
| Frequency | |
| Warning Threshold | If the metric value satisfies the condition defined along with Warning Threshold value, then a notification is sent to the user. |
| Critical Threshold | If the metric value satisfies the condition defined along with Critical Threshold value, then a notification is sent to the user. |
| Alert | The alert value can be set to either Yes or No. If it is Yes, then an alert message is sent to the user. |
Metrics
emc.vnx.lun.totalthroughput
Metric Details
| Applicable for | Device |
| Description | Average number of requests that are passed through the LUN per second. Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 lun -list / getlun -all |
| Category | EMC VNX |
| Collector Type | Gateway |
| Monitor Name | G2 - EMC VNX LUN Monitor |
| Unit | psec |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 15 | Manual |
| Filter | NULL | Not Applicable |
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | ||
| Critical Threshold | ||
| Critical Repeat Count | ||
| Alert | No | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
EMC VNX LUN Total Throughput
emc.vnx.lun.readthroughput
Metric Details
| Applicable for | Device |
| Description | Average number of read requests that are passed through the LUN per second. Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 lun -list / getlun -all |
| Category | EMC VNX |
| Collector Type | Gateway |
| Monitor Name | G2 - EMC VNX LUN Monitor |
| Unit | psec |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 15 | Manual |
| Filter | NULL | Not Applicable |
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | ||
| Critical Threshold | ||
| Critical Repeat Count | ||
| Alert | No | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
EMC VNX LUN Read Throughput
emc.vnx.lun.writethroughput
Metric Details
| Applicable for | Device |
| Description | Average number of write requests that are passed through the LUN per second. Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 lun -list / getlun -all |
| Category | EMC VNX |
| Collector Type | Gateway |
| Monitor Name | G2 - EMC VNX LUN Monitor |
| Unit | psec |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 15 | Manual |
| Filter | NULL | Not Applicable |
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | ||
| Critical Threshold | ||
| Critical Repeat Count | ||
| Alert | No | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
EMC VNX LUN Write Throughput
emc.vnx.lun.status
Metric Details
| Applicable for | Device |
| Description | Displays the status of the lun. Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 lun -list / getlun -all |
| Category | EMC VNX |
| Collector Type | Gateway |
| Monitor Name | G2 - EMC VNX LUN Monitor |
| Unit | NULL |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 15 | Manual |
| Filter | NULL | Not Applicable |
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | ||
| Critical Threshold | ||
| Critical Repeat Count | ||
| Alert | No | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
EMC VNX LUN Status
emc.vnx.lun.writebandwidth
Metric Details
| Applicable for | Device |
| Description | The total read bandwidth for the LUN. Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 lun -list / getlun -all |
| Category | EMC VNX |
| Collector Type | Gateway |
| Monitor Name | G2 - EMC VNX LUN Monitor |
| Unit | MBps |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 15 | Manual |
| Filter | NULL | Not Applicable |
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | ||
| Critical Threshold | ||
| Critical Repeat Count | ||
| Alert | No | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
EMC VNX LUN Write Bandwidth
emc.vnx.lun.readbandwidth
Metric Details
| Applicable for | Device |
| Description | The total read bandwidth for the LUN. Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 lun -list / getlun -all |
| Category | EMC VNX |
| Collector Type | Gateway |
| Monitor Name | G2 - EMC VNX LUN Monitor |
| Unit | MBps |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 15 | Manual |
| Filter | NULL | Not Applicable |
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | ||
| Critical Threshold | ||
| Critical Repeat Count | ||
| Alert | No | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
EMC VNX LUN Read Bandwidth
emc.vnx.lun.totalbandwidth
Metric Details
| Applicable for | Device |
| Description | The total bandwidth for the LUN. Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 lun -list / getlun -all |
| Category | EMC VNX |
| Collector Type | Gateway |
| Monitor Name | G2 - EMC VNX LUN Monitor |
| Unit | MBps |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 15 | Manual |
| Filter | NULL | Not Applicable |
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | ||
| Critical Threshold | ||
| Critical Repeat Count | ||
| Alert | No | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
EMC VNX LUN Total Bandwidth
emc.vnx.lun.trespasses-spa
Metric Details
| Applicable for | Device |
| Description | The number of trespasses by SPA for the LUN. Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 lun -list / getlun -all |
| Category | EMC VNX |
| Collector Type | Gateway |
| Monitor Name | G2 - EMC VNX LUN Monitor |
| Unit | NULL |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 15 | Manual |
| Filter | NULL | Not Applicable |
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | ||
| Critical Threshold | ||
| Critical Repeat Count | ||
| Alert | No | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
EMC VNX LUN SPA Tres Passes
emc.vnx.lun.trespasses-spb
Metric Details
| Applicable for | Device |
| Description | The number of trespasses by SPB for the LUN. Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 lun -list / getlun -all |
| Category | EMC VNX |
| Collector Type | Gateway |
| Monitor Name | G2 - EMC VNX LUN Monitor |
| Unit | NULL |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 15 | Manual |
| Filter | NULL | Not Applicable |
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | ||
| Critical Threshold | ||
| Critical Repeat Count | ||
| Alert | No | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
EMC VNX LUN SPB Tres Passes
emc.vnx.lun.trespasses
Metric Details
| Applicable for | Device |
| Description | The total number of trespasses for the LUN. Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 lun -list / getlun -all |
| Category | EMC VNX |
| Collector Type | Gateway |
| Monitor Name | G2 - EMC VNX LUN Monitor |
| Unit | NULL |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 15 | Manual |
| Filter | NULL | Not Applicable |
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | ||
| Critical Threshold | ||
| Critical Repeat Count | ||
| Alert | No | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
EMC VNX LUN Tres Passes
emc.vnx.lun.trespasses-pasthour
Metric Details
| Applicable for | Device |
| Description | The number of trespasses for the LUN in the past hour. Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 lun -list / getlun -all |
| Category | EMC VNX |
| Collector Type | Gateway |
| Monitor Name | G2 - EMC VNX LUN Monitor |
| Unit | NULL |
Possible Inputs
emc.vnx.lun.trespasses-pasthour
Sample Output
EMC VNX LUN Tres Passes Past Hour
emc.vnx.lun.trespasses-state
Metric Details
| Applicable for | Device |
| Description | State of the LUN Trespass. Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 lun -list / getlun -all |
| Category | EMC VNX |
| Collector Type | Gateway |
| Monitor Name | G2 - EMC VNX LUN Monitor |
| Unit | NULL |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 15 | Manual |
| Filter | NULL | Not Applicable |
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | ||
| Critical Threshold | ||
| Critical Repeat Count | ||
| Alert | No | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
EMC VNX LUN Tres Passes State
emc.vnx.lun.totalsofterrors
Metric Details
| Applicable for | Device |
| Description | The Soft errors on the LUN. Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 lun -list / getlun -all |
| Category | EMC VNX |
| Collector Type | Gateway |
| Monitor Name | G2 - EMC VNX LUN Monitor |
| Unit | NULL |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 15 | Manual |
| Filter | NULL | Not Applicable |
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | ||
| Critical Threshold | ||
| Critical Repeat Count | ||
| Alert | No | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
emc.vnx.lun.totalharderrors
Metric Details
| Applicable for | Device |
| Description | The Hard errors on the LUN. Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 lun -list / getlun -all |
| Category | EMC VNX |
| Collector Type | Gateway |
| Monitor Name | G2 - EMC VNX LUN Monitor |
| Unit | NULL |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 15 | Manual |
| Filter | NULL | Not Applicable |
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | ||
| Critical Threshold | ||
| Critical Repeat Count | ||
| Alert | No | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
emc.vnx.lun.servicetime
Metric Details
| Applicable for | Device |
| Description | The total time spent to serve the request. |
| Category | EMC VNX |
| Collector Type | Gateway |
| Monitor Name | G2 - EMC VNX LUN Monitor |
| Unit | ms |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 15 | Manual |
| Filter | NULL | Not Applicable |
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | ||
| Critical Threshold | ||
| Critical Repeat Count | ||
| Alert | No | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
EMC VNX LUN Service Time
emc.vnx.lun.percentidle
Metric Details
| Applicable for | Device |
| Description | The percent of time that the LUN is idle. Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 lun -list / getlun -all |
| Category | EMC VNX |
| Collector Type | Gateway |
| Monitor Name | G2 - EMC VNX LUN Monitor |
| Unit | % |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 15 | Manual |
| Filter | NULL | Not Applicable |
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | ||
| Critical Threshold | ||
| Critical Repeat Count | ||
| Alert | No | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
EMC VNX LUN Percent Idle
emc.vnx.lun.percentbusy
Metric Details
| Applicable for | Device |
| Description | The percent of time that the LUN is busy. Command : /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 lun -list / getlun -all |
| Category | EMC VNX |
| Collector Type | Gateway |
| Monitor Name | G2 - EMC VNX LUN Monitor |
| Unit | % |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 15 | Manual |
| Filter | NULL | Not Applicable |
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | ||
| Critical Threshold | ||
| Critical Repeat Count | ||
| Alert | No | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
EMC VNX LUN Percent Busy
emc.vnx.lun.capacity
Metric Details
| Applicable for | Device |
| Description | The capacity of the LUN in Gigabytes. |
| Category | EMC VNX |
| Collector Type | Gateway |
| Monitor Name | G2 - EMC VNX LUN Monitor |
| Unit | GB |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 15 | Manual |
| Filter | NULL | Not Applicable |
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | ||
| Critical Threshold | ||
| Critical Repeat Count | ||
| Alert | No | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
