Description
Monitors file pools. This template is applicable for file pools only. Check the pool type before applying.
Prerequisites
Resource should be added using integration to apply storage specific templates.
How to Apply: This template is All instance selection based. It will not ask user to select any instance (s) while assigning it to a device.
Metric Parameters
| Parameter | Description |
|---|---|
| Frequency | |
| Warning Threshold | If the metric value satisfies the condition defined along with Warning Threshold value, then a notification is sent to the user. |
| Critical Threshold | If the metric value satisfies the condition defined along with Critical Threshold value, then a notification is sent to the user. |
| Alert | The alert value can be set to either Yes or No. If it is Yes, then an alert message is sent to the user. |
Metrics
emc.vnx.storagepool.availablesize
Metric Details
| Applicable for | Device |
| Description | Storage Pool available capacity. VNX have 3 types of storage pools. File pool, Block pool and Raid pool. If it is file pool OpsRamp uses XML API to calculate this metric. If it is block pool then command is /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 storagepool -list. If it is raid pool command is /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getrg |
| Category | EMC VNX |
| Collector Type | Gateway |
| Monitor Name | G2 - EMC VNX NAS Storage Pool Monitor |
| Unit | GB |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 15 | Manual |
| Filter | NULL | Not Applicable |
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | ||
| Critical Threshold | ||
| Critical Repeat Count | ||
| Alert | No | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
EMC VNX Storage Pool Available Size
emc.vnx.storagepool.utilization
Metric Details
| Applicable for | Device |
| Description | Pool utilization. VNX have 3 types of storage pools. File pool, Block pool and Raid pool. If it is file pool OpsRamp uses XML API to calculate this metric. If it is block pool then command is /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 storagepool -list., If it is raid pool command is /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getrg |
| Category | EMC VNX |
| Collector Type | Gateway |
| Monitor Name | G2 - EMC VNX NAS Storage Pool Monitor |
| Unit | % |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 15 | Manual |
| Filter | NULL | Not Applicable |
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | ||
| Critical Threshold | ||
| Critical Repeat Count | ||
| Alert | No | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
EMC VNX Storage Pool Utilization
emc.vnx.storagepool.status
Metric Details
| Applicable for | Device |
| Description | Displays the information for the current state of the pool. VNX have 3 types of storage pools. File pool, Block pool and Raid pool. If it is file pool OpsRamp uses XML API to calculate this metric. If it is block pool then command is /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 storagepool -list., If it is raid pool command is /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getrg |
| Category | EMC VNX |
| Collector Type | Gateway |
| Monitor Name | G2 - EMC VNX NAS Storage Pool Monitor |
| Unit |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 15 | Manual |
| Filter | NULL | Not Applicable |
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | ||
| Critical Threshold | ||
| Critical Repeat Count | ||
| Alert | No | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
EMC VNX Storage Pool Status
emc.vnx.storagepool.percentfree
Metric Details
| Applicable for | Device |
| Description | The percent of the Pool that is free. VNX have 3 types of storage pools. File pool, Block pool and Raid pool. If it is file pool OpsRamp uses XML API to calculate this metric. If it is block pool then command is /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 storagepool -list., If it is raid pool command is /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 getrg |
| Category | EMC VNX |
| Collector Type | Gateway |
| Monitor Name | G2 - EMC VNX NAS Storage Pool Monitor |
| Unit | % |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 15 | Manual |
| Filter | NULL | Not Applicable |
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | ||
| Critical Threshold | ||
| Critical Repeat Count | ||
| Alert | No | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
