Description
Monitors fast caches. This template is applicable for storage array.
Prerequisites
Resource should be added using integration to apply storage specific templates.
How to Apply: This template is All instance selection based. It will not ask user to select any instance (s) while assigning it to a device.
Metric Parameters
Parameter | Description |
---|---|
Frequency | |
Warning Threshold | If the metric value satisfies the condition defined along with Warning Threshold value, then a notification is sent to the user. |
Critical Threshold | If the metric value satisfies the condition defined along with Critical Threshold value, then a notification is sent to the user. |
Alert | The alert value can be set to either Yes or No. If it is Yes, then an alert message is sent to the user. |
Metrics
emc.vnx.fastcache.state
Metric Details
Applicable for | Device |
Description | State of the Fast Cache. Command: /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 cache -fast -info -status -perfData |
Category | EMC VNX |
Collector Type | Gateway |
Monitor Name | G2 - EMC VNX SAN Storage Array Fast Cache Monitor |
Unit | NULL |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | Manual |
Filter | NULL | Not Applicable |
Warning Operator | ||
Warning Threshold | ||
Warning Repeat Count | ||
Critical Operator | ||
Critical Threshold | ||
Critical Repeat Count | ||
Alert | No | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
emc.vnx.fastcache.percentdirtyspa
Metric Details
Applicable for | Device |
Description | The Fast Cache Percentage Dirty for Storage Processor A. Command: /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 cache -fast -info -status -perfData |
Category | EMC VNX |
Collector Type | Gateway |
Monitor Name | G2 - EMC VNX SAN Storage Array Fast Cache Monitor |
Unit | % |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | Manual |
Filter | NULL | Not Applicable |
Warning Operator | ||
Warning Threshold | ||
Warning Repeat Count | ||
Critical Operator | ||
Critical Threshold | ||
Critical Repeat Count | ||
Alert | No | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
emc.vnx.fastcache.percentdirtyspb
Metric Details
Applicable for | Device |
Description | The Fast Cache Percentage Dirty for Storage Processor B. Command: /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 cache -fast -info -status -perfData |
Category | EMC VNX |
Collector Type | Gateway |
Monitor Name | G2 - EMC VNX SAN Storage Array Fast Cache Monitor |
Unit | % |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | Manual |
Filter | NULL | Not Applicable |
Warning Operator | ||
Warning Threshold | ||
Warning Repeat Count | ||
Critical Operator | ||
Critical Threshold | ||
Critical Repeat Count | ||
Alert | No | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
emc.vnx.fastcache.size
Metric Details
Applicable for | Device |
Description | The size of the fast cache. Command: /opt/Navisphere/bin/naviseccli -h <ip-address> -User <user-name> -Password <password> -Scope 0 cache -fast -info -status -perfData |
Category | EMC VNX |
Collector Type | Gateway |
Monitor Name | G2 - EMC VNX SAN Storage Array Fast Cache Monitor |
Unit | GB |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | Manual |
Filter | NULL | Not Applicable |
Warning Operator | ||
Warning Threshold | ||
Warning Repeat Count | ||
Critical Operator | ||
Critical Threshold | ||
Critical Repeat Count | ||
Alert | No | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output