Description

It monitors the CPU metrics. This template is applicable for storage array.

Prerequisites

The resource should be added using integrations. Gateway should be up and running. Storage Array should be reachable from Gateway. Storage Array and its resources should be in managed state.

Metric Parameters

Metric Parameters
ParameterDescription
Frequency
  • Frequency is the interval in which you want to probe and collect metric data from the target device/resource
  • Frequency is defined in minutes (min).
  • Warning ThresholdIf the metric value satisfies the condition defined along with Warning Threshold value, then a notification is sent to the user.
    Critical ThresholdIf the metric value satisfies the condition defined along with Critical Threshold value, then a notification is sent to the user.
    AlertThe alert value can be set to either Yes or No. If it is Yes, then an alert message is sent to the user.

    Metrics

    emc.vnxe.cpu.summaryutilization

    Metric Details

    Metric Details
    Applicable forDevice
    DescriptionCPU Summary Utilization. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /metrics/value/rt -path sp.*.cpu show -interval 10 -count 1 -expand -output csv
    CategoryEMC VNXe
    Collector TypeGateway
    Monitor NameG2 - EMC VNXe Storage Array CPU Monitor
    Unit%

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency15Manual
    Filter
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical Operator
    Critical Threshold
    Critical Repeat Count
    AlertNoYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    emc.vnxe.cpu.uptime

    Metric Details

    Metric Details
    Applicable forDevice
    DescriptionTime since boot up in seconds. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /metrics/value/rt -path sp.*.cpu show -interval 10 -count 1 -expand -output csv
    CategoryEMC VNXe
    Collector TypeGateway
    Monitor NameG2 - EMC VNXe Storage Array CPU Monitor
    Units

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency15Manual
    Filter
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical Operator
    Critical Threshold
    Critical Repeat Count
    AlertNoYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph