Description
Monitors disks. This template is applicable for storage array.
Prerequisites
The device should be added using integrations. Gateway should be up and running. Storage Array should be reachable from Gateway. Storage Array and its resources should be in managed state.
Metric Parameters
Parameter | Description |
---|---|
Frequency | Warning Threshold | If the metric value satisfies the condition defined along with Warning Threshold value, then a notification is sent to the user. |
Critical Threshold | If the metric value satisfies the condition defined along with Critical Threshold value, then a notification is sent to the user. |
Alert | The alert value can be set to either Yes or No. If it is Yes, then an alert message is sent to the user. |
Metrics
emc.vnxe.disk.averagequeuelength
Metric Details
Applicable for | Device |
Description | Average Queue Length for the disk. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /metrics/value/rt -path sp.*.physical.disk show -interval 10 -count 1 -expand -output csv |
Category | EMC VNXe |
Collector Type | Gateway |
Monitor Name | G2 - EMC VNXe Storage Array Disk Monitor |
Unit |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | Manual |
Filter | ||
Warning Operator | ||
Warning Threshold | ||
Warning Repeat Count | ||
Critical Operator | ||
Critical Threshold | ||
Critical Repeat Count | ||
Alert | No | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
emc.vnxe.disk.readbytes
Metric Details
Applicable for | Device |
Description | Number of bytes read from this disk. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /metrics/value/rt -path sp.*.physical.disk show -interval 10 -count 1 -expand -output csv |
Category | EMC VNXe |
Collector Type | Gateway |
Monitor Name | G2 - EMC VNXe Storage Array Disk Monitor |
Unit | KBps |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | Manual |
Filter | ||
Warning Operator | ||
Warning Threshold | ||
Warning Repeat Count | ||
Critical Operator | ||
Critical Threshold | ||
Critical Repeat Count | ||
Alert | No | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
emc.vnxe.disk.reads
Metric Details
Applicable for | Device |
Description | Reads from this disk. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /metrics/value/rt -path sp.*.physical.disk show -interval 10 -count 1 -expand -output csv |
Category | EMC VNXe |
Collector Type | Gateway |
Monitor Name | G2 - EMC VNXe Storage Array Disk Monitor |
Unit | psec |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | Manual |
Filter | ||
Warning Operator | ||
Warning Threshold | ||
Warning Repeat Count | ||
Critical Operator | ||
Critical Threshold | ||
Critical Repeat Count | ||
Alert | No | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
emc.vnxe.disk.responsetime
Metric Details
Applicable for | Device |
Description | Average response time for this disk, measured in microseconds. This measures the average time it takes for a disk request to complete. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /metrics/value/rt -path sp.*.physical.disk show -interval 10 -count 1 -expand -output csv |
Category | EMC VNXe |
Collector Type | Gateway |
Monitor Name | G2 - EMC VNXe Storage Array Disk Monitor |
Unit | microsec |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | Manual |
Filter | ||
Warning Operator | ||
Warning Threshold | ||
Warning Repeat Count | ||
Critical Operator | ||
Critical Threshold | ||
Critical Repeat Count | ||
Alert | No | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
emc.vnxe.disk.servicetime
Metric Details
Applicable for | Device |
Description | Average service time for this disk, measured in microseconds. This measures the average time the disk spends on each individual request. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /metrics/value/rt -path sp.*.physical.disk show -interval 10 -count 1 -expand -output csv |
Category | EMC VNXe |
Collector Type | Gateway |
Monitor Name | G2 - EMC VNXe Storage Array Disk Monitor |
Unit | microsec |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | Manual |
Filter | ||
Warning Operator | ||
Warning Threshold | ||
Warning Repeat Count | ||
Critical Operator | ||
Critical Threshold | ||
Critical Repeat Count | ||
Alert | No | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
emc.vnxe.disk.status
Metric Details
Applicable for | Device |
Description | Status of the Disk. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /env/disk show -output csv |
Category | EMC VNXe |
Collector Type | Gateway |
Monitor Name | G2 - EMC VNXe Storage Array Disk Monitor |
Unit | NULL |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | Manual |
Filter | ||
Warning Operator | ||
Warning Threshold | ||
Warning Repeat Count | ||
Critical Operator | ||
Critical Threshold | ||
Critical Repeat Count | ||
Alert | No | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
emc.vnxe.disk.totalcalls
Metric Details
Applicable for | Device |
Description | Total Reads and Writes for this disk. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /metrics/value/rt -path sp.*.physical.disk show -interval 10 -count 1 -expand -output csv |
Category | EMC VNXe |
Collector Type | Gateway |
Monitor Name | G2 - EMC VNXe Storage Array Disk Monitor |
Unit | psec |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | Manual |
Filter | ||
Warning Operator | ||
Warning Threshold | ||
Warning Repeat Count | ||
Critical Operator | ||
Critical Threshold | ||
Critical Repeat Count | ||
Alert | No | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
emc.vnxe.disk.utilization
Metric Details
Applicable for | Device |
Description | Utilization % for this disk. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /metrics/value/rt -path sp.*.physical.disk show -interval 10 -count 1 -expand -output csv |
Category | EMC VNXe |
Collector Type | Gateway |
Monitor Name | G2 - EMC VNXe Storage Array Disk Monitor |
Unit | % |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | Manual |
Filter | ||
Warning Operator | ||
Warning Threshold | ||
Warning Repeat Count | ||
Critical Operator | ||
Critical Threshold | ||
Critical Repeat Count | ||
Alert | No | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
emc.vnxe.disk.writebytes
Metric Details
Applicable for | Device |
Description | Number of bytes written to this disk. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /metrics/value/rt -path sp.*.physical.disk show -interval 10 -count 1 -expand -output csv |
Category | EMC VNXe |
Collector Type | Gateway |
Monitor Name | G2 - EMC VNXe Storage Array Disk Monitor |
Unit | KBps |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | Manual |
Filter | ||
Warning Operator | ||
Warning Threshold | ||
Warning Repeat Count | ||
Critical Operator | ||
Critical Threshold | ||
Critical Repeat Count | ||
Alert | No | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
emc.vnxe.disk.writes
Metric Details
Applicable for | Device |
Description | Writes to this disk. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /metrics/value/rt -path sp.*.physical.disk show -interval 10 -count 1 -expand -output csv |
Category | EMC VNXe |
Collector Type | Gateway |
Monitor Name | G2 - EMC VNXe Storage Array Disk Monitor |
Unit | psec |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | Manual |
Filter | ||
Warning Operator | ||
Warning Threshold | ||
Warning Repeat Count | ||
Critical Operator | ||
Critical Threshold | ||
Critical Repeat Count | ||
Alert | No | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph