Description
Monitors the Storage Array Network metrics. This template is applicable for storage array.
Prerequisites
The device should be added using integrations. Gateway should be up and running. Storage Array should be reachable from Gateway. Storage Array and its resources should be in managed state.
Metric Parameters
Parameter | Description |
---|---|
Frequency | Warning Threshold | If the metric value satisfies the condition defined along with Warning Threshold value, then a notification is sent to the user. |
Critical Threshold | If the metric value satisfies the condition defined along with Critical Threshold value, then a notification is sent to the user. |
Alert | The alert value can be set to either Yes or No. If it is Yes, then an alert message is sent to the user. |
Metrics
emc.vnxe.network.bytesin
Metric Details
Applicable for | Device |
Description | Number of octets read from network device. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /metrics/value/rt -path sp.*.net.device show -interval 10 -count 1 -expand -output csv |
Category | EMC VNXe |
Collector Type | Gateway |
Monitor Name | G2 - EMC VNXe Storage Array Network Monitor |
Unit | KBps |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | Manual |
Filter | ||
Warning Operator | ||
Warning Threshold | ||
Warning Repeat Count | ||
Critical Operator | ||
Critical Threshold | ||
Critical Repeat Count | ||
Alert | No | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
emc.vnxe.network.bytesout
Metric Details
Applicable for | Device |
Description | Number of octets written to network device. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /metrics/value/rt -path sp.*.net.device show -interval 10 -count 1 -expand -output csv |
Category | EMC VNXe |
Collector Type | Gateway |
Monitor Name | G2 - EMC VNXe Storage Array Network Monitor |
Unit | KBps |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | Manual |
Filter | ||
Warning Operator | ||
Warning Threshold | ||
Warning Repeat Count | ||
Critical Operator | ||
Critical Threshold | ||
Critical Repeat Count | ||
Alert | No | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
emc.vnxe.network.pktsin
Metric Details
Applicable for | Device |
Description | Number of packets read from network device. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /metrics/value/rt -path sp.*.net.device show -interval 10 -count 1 -expand -output csv |
Category | EMC VNXe |
Collector Type | Gateway |
Monitor Name | G2 - EMC VNXe Storage Array Network Monitor |
Unit | psec |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | Manual |
Filter | ||
Warning Operator | ||
Warning Threshold | ||
Warning Repeat Count | ||
Critical Operator | ||
Critical Threshold | ||
Critical Repeat Count | ||
Alert | No | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
emc.vnxe.network.pktsout
Metric Details
Applicable for | Device |
Description | Number of packets written to network device. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /metrics/value/rt -path sp.*.net.device show -interval 10 -count 1 -expand -output csv |
Category | EMC VNXe |
Collector Type | Gateway |
Monitor Name | G2 - EMC VNXe Storage Array Network Monitor |
Unit | psec |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | Manual |
Filter | ||
Warning Operator | ||
Warning Threshold | ||
Warning Repeat Count | ||
Critical Operator | ||
Critical Threshold | ||
Critical Repeat Count | ||
Alert | No | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph