Description
Monitors the NFS data store metrics. This template is applicable for storage array.
Prerequisites
The device should be added using integrations. Gateway should be up and running. Storage Array should be reachable from Gateway. Storage Array and its resources should be in managed state.
Metric Parameters
| Parameter | Description |
|---|---|
| Frequency | Warning Threshold | If the metric value satisfies the condition defined along with Warning Threshold value, then a notification is sent to the user. |
| Critical Threshold | If the metric value satisfies the condition defined along with Critical Threshold value, then a notification is sent to the user. |
| Alert | The alert value can be set to either Yes or No. If it is Yes, then an alert message is sent to the user. |
Metrics
emc.vnxe.nfsdatastore.availablesize
Metric Details
| Applicable for | Device |
| Description | NFS Data Store Available Size. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /stor/prov/vmware/nfs show -output csv |
| Category | EMC VNXe |
| Collector Type | Gateway |
| Monitor Name | G2 - EMC VNXe Storage Array NFS Datastore Monitor |
| Unit | GB |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 15 | Manual |
| Filter | ||
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | ||
| Critical Threshold | ||
| Critical Repeat Count | ||
| Alert | No | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
emc.vnxe.nfsdatastore.status
Metric Details
| Applicable for | Device |
| Description | Status of the NFS Data store. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /stor/prov/vmware/nfs show -output csv |
| Category | EMC VNXe |
| Collector Type | Gateway |
| Monitor Name | G2 - EMC VNXe Storage Array NFS Datastore Monitor |
| Unit | NULL |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 15 | Manual |
| Filter | ||
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | ||
| Critical Threshold | ||
| Critical Repeat Count | ||
| Alert | No | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
emc.vnxe.nfsdatastore.utilization
Metric Details
| Applicable for | Device |
| Description | NFS Data Store Utilization. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /stor/prov/vmware/nfs show -output csv |
| Category | EMC VNXe |
| Collector Type | Gateway |
| Monitor Name | G2 - EMC VNXe Storage Array NFS Datastore Monitor |
| Unit | % |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 15 | Manual |
| Filter | ||
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | ||
| Critical Threshold | ||
| Critical Repeat Count | ||
| Alert | No | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph