Description
This template monitors the NFS metrics. This template is applicable for storage array.
Prerequisites
The resource should be added using integrations. Gateway should be up and running. Storage Array should be reachable from Gateway. Storage Array and its resources should be in managed state.
Metric Parameters
Parameter | Description |
---|---|
Frequency | Warning Threshold | If the metric value satisfies the condition defined along with Warning Threshold value, then a notification is sent to the user. |
Critical Threshold | If the metric value satisfies the condition defined along with Critical Threshold value, then a notification is sent to the user. |
Alert | The alert value can be set to either Yes or No. If it is Yes, then an alert message is sent to the user. |
Metrics
emc.vnxe.nfs.readavgsize
Metric Details
Applicable for | Device |
Description | Average NFS read size. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /metrics/value/rt -path sp.*.nfs.basic show -interval 10 -count 1 -expand -output csv |
Category | EMC VNXe |
Collector Type | Gateway |
Monitor Name | G2 - EMC VNXe Storage Array NFS Monitor |
Unit | KB |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | Manual |
Filter | ||
Warning Operator | ||
Warning Threshold | ||
Warning Repeat Count | ||
Critical Operator | ||
Critical Threshold | ||
Critical Repeat Count | ||
Alert | No | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
emc.vnxe.nfs.readbytes
Metric Details
Applicable for | Device |
Description | Number of NFS bytes read. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /metrics/value/rt -path sp.*.nfs.basic show -interval 10 -count 1 -expand -output csv |
Category | EMC VNXe |
Collector Type | Gateway |
Monitor Name | G2 - EMC VNXe Storage Array NFS Monitor |
Unit | KBps |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | Manual |
Filter | ||
Warning Operator | ||
Warning Threshold | ||
Warning Repeat Count | ||
Critical Operator | ||
Critical Threshold | ||
Critical Repeat Count | ||
Alert | No | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
emc.vnxe.nfs.reads
Metric Details
Applicable for | Device |
Description | Number of NFS read operations. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /metrics/value/rt -path sp.*.nfs.basic show -interval 10 -count 1 -expand -output csv |
Category | EMC VNXe |
Collector Type | Gateway |
Monitor Name | G2 - EMC VNXe Storage Array NFS Monitor |
Unit | psec |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | Manual |
Filter | ||
Warning Operator | ||
Warning Threshold | ||
Warning Repeat Count | ||
Critical Operator | ||
Critical Threshold | ||
Critical Repeat Count | ||
Alert | No | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
emc.vnxe.nfs.writeavgsize
Metric Details
Applicable for | Device |
Description | Average NFS write size. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /metrics/value/rt -path sp.*.nfs.basic show -interval 10 -count 1 -expand -output csv |
Category | EMC VNXe |
Collector Type | Gateway |
Monitor Name | G2 - EMC VNXe Storage Array NFS Monitor |
Unit | KB |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | Manual |
Filter | ||
Warning Operator | ||
Warning Threshold | ||
Warning Repeat Count | ||
Critical Operator | ||
Critical Threshold | ||
Critical Repeat Count | ||
Alert | No | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
emc.vnxe.nfs.writebytes
Metric Details
Applicable for | Device |
Description | Number of NFS bytes write. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /metrics/value/rt -path sp.*.nfs.basic show -interval 10 -count 1 -expand -output csv |
Category | EMC VNXe |
Collector Type | Gateway |
Monitor Name | G2 - EMC VNXe Storage Array NFS Monitor |
Unit | KBps |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | Manual |
Filter | ||
Warning Operator | ||
Warning Threshold | ||
Warning Repeat Count | ||
Critical Operator | ||
Critical Threshold | ||
Critical Repeat Count | ||
Alert | No | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
emc.vnxe.nfs.writes
Metric Details
Applicable for | Device |
Description | Number of NFS write operations. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /metrics/value/rt -path sp.*.nfs.basic show -interval 10 -count 1 -expand -output csv |
Category | EMC VNXe |
Collector Type | Gateway |
Monitor Name | G2 - EMC VNXe Storage Array NFS Monitor |
Unit | psec |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | Manual |
Filter | ||
Warning Operator | ||
Warning Threshold | ||
Warning Repeat Count | ||
Critical Operator | ||
Critical Threshold | ||
Critical Repeat Count | ||
Alert | No | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph