Description

This template is applicable for storage processor. Monitors the storage processor resources.

Prerequisites

The device should be added using integrations. Gateway should be up and running. Storage Array should be reachable from Gateway. Storage Array and its resources should be in managed state.

Metric Parameters

Metric Parameters
ParameterDescription
Frequency
  • Frequency is the interval in which you want to probe and collect metric data from the target device/resource
  • Frequency is defined in minutes (min).
  • Warning ThresholdIf the metric value satisfies the condition defined along with Warning Threshold value, then a notification is sent to the user.
    Critical ThresholdIf the metric value satisfies the condition defined along with Critical Threshold value, then a notification is sent to the user.
    AlertThe alert value can be set to either Yes or No. If it is Yes, then an alert message is sent to the user.

    Metrics

    emc.vnxe.storageprocessor.readblocks

    Metric Details

    Metric Details
    Applicable forSTORAGE_ARRAY_PROCESSOR
    DescriptionBlocks read from this SP. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /metrics/value/rt -path sp.*.storage.summary show -interval 10 -count 1 -expand -output csv
    CategoryEMC VNXe
    Collector TypeGateway
    Monitor NameG2 - EMC VNXe Storage Processor Monitor
    Unitpsec

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency15Manual
    Filter
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical Operator
    Critical Threshold
    Critical Repeat Count
    AlertNoYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    emc.vnxe.storageprocessor.readbytes

    Metric Details

    Metric Details
    Applicable forSTORAGE_ARRAY_PROCESSOR
    DescriptionNumber of bytes read from this SP. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /metrics/value/rt -path sp.*.storage.summary show -interval 10 -count 1 -expand -output csv
    CategoryEMC VNXe
    Collector TypeGateway
    Monitor NameG2 - EMC VNXe Storage Processor Monitor
    UnitKBps

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency15Manual
    Filter
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical Operator
    Critical Threshold
    Critical Repeat Count
    AlertNoYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    emc.vnxe.storageprocessor.reads

    Metric Details

    Metric Details
    Applicable forSTORAGE_ARRAY_PROCESSOR
    DescriptionReads from this SP. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /metrics/value/rt -path sp.*.storage.summary show -interval 10 -count 1 -expand -output csv
    CategoryEMC VNXe
    Collector TypeGateway
    Monitor NameG2 - EMC VNXe Storage Processor Monitor
    Unitpsec

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency15Manual
    Filter
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical Operator
    Critical Threshold
    Critical Repeat Count
    AlertNoYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    emc.vnxe.storageprocessor.status

    Metric Details

    Metric Details
    Applicable forSTORAGE_ARRAY_PROCESSOR
    DescriptionStatus of the Storage Processor. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /env/sp show -output csv
    CategoryEMC VNXe
    Collector TypeGateway
    Monitor NameG2 - EMC VNXe Storage Processor Monitor
    UnitNULL

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency15Manual
    Filter
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical Operator
    Critical Threshold
    Critical Repeat Count
    AlertNoYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    emc.vnxe.storageprocessor.totalbytes

    Metric Details

    Metric Details
    Applicable forSTORAGE_ARRAY_PROCESSOR
    DescriptionTotal number of read and write bytes on this sp. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /metrics/value/rt -path sp.*.storage.summary show -interval 10 -count 1 -expand -output csv
    CategoryEMC VNXe
    Collector TypeGateway
    Monitor NameG2 - EMC VNXe Storage Processor Monitor
    UnitKBps

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency15Manual
    Filter
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical Operator
    Critical Threshold
    Critical Repeat Count
    AlertNoYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    emc.vnxe.storageprocessor.totalcalls

    Metric Details

    Metric Details
    Applicable forSTORAGE_ARRAY_PROCESSOR
    DescriptionTotal number of read and write requests on this SP. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /metrics/value/rt -path sp.*.storage.summary show -interval 10 -count 1 -expand -output csv
    CategoryEMC VNXe
    Collector TypeGateway
    Monitor NameG2 - EMC VNXe Storage Processor Monitor
    Unitpsec

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency15Manual
    Filter
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical Operator
    Critical Threshold
    Critical Repeat Count
    AlertNoYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    emc.vnxe.storageprocessor.writeblocks

    Metric Details

    Metric Details
    Applicable forSTORAGE_ARRAY_PROCESSOR
    DescriptionBlocks write to this SP. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /metrics/value/rt -path sp.*.storage.summary show -interval 10 -count 1 -expand -output csv
    CategoryEMC VNXe
    Collector TypeGateway
    Monitor NameG2 - EMC VNXe Storage Processor Monitor
    Unitpsec

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency15Manual
    Filter
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical Operator
    Critical Threshold
    Critical Repeat Count
    AlertNoYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    emc.vnxe.storageprocessor.writebytes

    Metric Details

    Metric Details
    Applicable forSTORAGE_ARRAY_PROCESSOR
    DescriptionNumber of bytes write to this SP. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /metrics/value/rt -path sp.*.storage.summary show -interval 10 -count 1 -expand -output csv
    CategoryEMC VNXe
    Collector TypeGateway
    Monitor NameG2 - EMC VNXe Storage Processor Monitor
    UnitKBps

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency15Manual
    Filter
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical Operator
    Critical Threshold
    Critical Repeat Count
    AlertNoYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    emc.vnxe.storageprocessor.writes

    Metric Details

    Metric Details
    Applicable forSTORAGE_ARRAY_PROCESSOR
    DescriptionWrites to this SP. Command is : /opt/emc/uemcli-1.5.4.1.0027/bin/uemcli.sh -d <ip-address> -port 443 -u <scope/username> -p <password> -sslPolicy accept -t 240 -noheader /metrics/value/rt -path sp.*.storage.summary show -interval 10 -count 1 -expand -output csv
    CategoryEMC VNXe
    Collector TypeGateway
    Monitor NameG2 - EMC VNXe Storage Processor Monitor
    Unitpsec

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency15Manual
    Filter
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical Operator
    Critical Threshold
    Critical Repeat Count
    AlertNoYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph