Description

Monitors the DF RAID command statistics like number of received read/write commands, read/write hit commands and read/write hit rate to the LUN and to the internal LUN. Also it monitors the write date rate in the cache memory. [Hitachi-DF-RAID-LAN-MIB.mib]

Prerequisites

SNMP should be enabled in end device and device should support Hitachi-DF-RAID-LAN-MIB OIDs and SNMP credentials should be attached against the device in portal.

How to Apply: This template is All instance selection based. It will not ask user to select any instance(s) while assigning it to a device.

Metric Parameters

Metric Parameters
ParameterDescription
Frequency
  • Frequency is the interval in which you want to probe and collect metric data from the target device/resource
  • Frequency is defined in minutes (min).
    • Warning ThresholdIf the metric value satisfies the condition defined along with Warning Threshold value, then a notification is sent to the user.
    Critical ThresholdIf the metric value satisfies the condition defined along with Critical Threshold value, then a notification is sent to the user.
    AlertThe alert value can be set to either Yes or No. If it is Yes, then an alert message is sent to the user.

    Metrics

    hitachi.df.cache.write.data.rate

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.116.5.11.1.2.4.1
    ExpressionNULL
    DescriptionRepresents the write data rate in the cache memory. [OID: 1.3.6.1.4.1.116.5.11.1.2.4.1]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameHitachi DF Cache Memory Write Data Rate
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency51 – 1440 (mins)
    Filter
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical Operator
    Critical Threshold
    Critical Repeat Count
    AlertNoYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    hitachi.df.internal.lun.received.read.commands

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.116.5.11.1.2.7.1.1.2
    ExpressionNULL
    DescriptionRepresents the number of received read commands to the internal LUN.
    [OIDs: 1.3.6.1.4.1.116.5.11.1.2.7.1.1.1, 1.3.6.1.4.1.116.5.11.1.2.7.1.1.2]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameHitachi DF Internal LUN Command Statistics
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency51 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical Operator
    Critical Threshold
    Critical Repeat Count
    AlertNoYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    hitachi.df.internal.lun.read.hit.commands

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.116.5.11.1.2.7.1.1.3
    ExpressionNULL
    DescriptionRepresents the number of read hit commands to the internal LUN.
    [OIDs: 1.3.6.1.4.1.116.5.11.1.2.7.1.1.1, 1.3.6.1.4.1.116.5.11.1.2.7.1.1.3]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameHitachi DF Internal LUN Command Statistics
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency51 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical Operator
    Critical Threshold
    Critical Repeat Count
    AlertNoYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    hitachi.df.internal.lun.read.hit.rate

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.116.5.11.1.2.7.1.1.4
    ExpressionNULL
    DescriptionRepresents the read hit rate to the internal LUN. [OIDs: 1.3.6.1.4.1.116.5.11.1.2.7.1.1.1, 1.3.6.1.4.1.116.5.11.1.2.7.1.1.4]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameHitachi DF Internal LUN Command Statistics
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency51 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical Operator
    Critical Threshold
    Critical Repeat Count
    AlertNoYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    hitachi.df.internal.lun.received.write.commands

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.116.5.11.1.2.7.1.1.5
    ExpressionNULL
    DescriptionRepresents the number of received write commands to the internal LUN.
    [OIDs: 1.3.6.1.4.1.116.5.11.1.2.7.1.1.1, 1.3.6.1.4.1.116.5.11.1.2.7.1.1.5]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameHitachi DF Internal LUN Command Statistics
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency51 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical Operator
    Critical Threshold
    Critical Repeat Count
    AlertNoYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    hitachi.df.internal.lun.write.hit.commands

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.116.5.11.1.2.7.1.1.6
    ExpressionNULL
    DescriptionRepresents the number of write hit commands to the internal LUN.
    [OIDs: 1.3.6.1.4.1.116.5.11.1.2.7.1.1.1, 1.3.6.1.4.1.116.5.11.1.2.7.1.1.6]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameHitachi DF Internal LUN Command Statistics
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency51 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical Operator
    Critical Threshold
    Critical Repeat Count
    AlertNoYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    hitachi.df.internal.lun.write.hit.rate

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.116.5.11.1.2.7.1.1.7
    ExpressionNULL
    DescriptionRepresents the write hit rate to the internal LUN. [OIDs: 1.3.6.1.4.1.116.5.11.1.2.7.1.1.1, 1.3.6.1.4.1.116.5.11.1.2.7.1.1.7]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameHitachi DF Internal LUN Command Statistics
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency51 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical Operator
    Critical Threshold
    Critical Repeat Count
    AlertNoYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    hitachi.df.lun.received.read.commands

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.116.5.11.1.2.3.1.1.2
    ExpressionNULL
    DescriptionRepresents the number of received read commands. [OIDs: 1.3.6.1.4.1.116.5.11.1.2.3.1.1.1, 1.3.6.1.4.1.116.5.11.1.2.3.1.1.2]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameHitachi DF LUN Command Statistics
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency51 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical Operator
    Critical Threshold
    Critical Repeat Count
    AlertNoYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    hitachi.df.lun.read.hit.commands

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.116.5.11.1.2.3.1.1.3
    ExpressionNULL
    DescriptionRepresents the number of read hit commands to LUN. [OIDs: 1.3.6.1.4.1.116.5.11.1.2.3.1.1.1, 1.3.6.1.4.1.116.5.11.1.2.3.1.1.3]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameHitachi DF LUN Command Statistics
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency51 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical Operator
    Critical Threshold
    Critical Repeat Count
    AlertNoYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    hitachi.df.lun.read.hit.rate

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.116.5.11.1.2.3.1.1.4
    ExpressionNULL
    DescriptionRepresents the read hit rate to LUN. [OIDs: 1.3.6.1.4.1.116.5.11.1.2.3.1.1.1, 1.3.6.1.4.1.116.5.11.1.2.3.1.1.4]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameHitachi DF LUN Command Statistics
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency51 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical Operator
    Critical Threshold
    Critical Repeat Count
    AlertNoYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    hitachi.df.lun.received.write.commands

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.116.5.11.1.2.3.1.1.5
    ExpressionNULL
    DescriptionRepresents the number of received write commands. [OIDs: 1.3.6.1.4.1.116.5.11.1.2.3.1.1.1, 1.3.6.1.4.1.116.5.11.1.2.3.1.1.5]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameHitachi DF LUN Command Statistics
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency51 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical Operator
    Critical Threshold
    Critical Repeat Count
    AlertNoYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    hitachi.df.lun.write.hit.commands

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.116.5.11.1.2.3.1.1.6
    ExpressionNULL
    DescriptionRepresents the number of write hit commands to LUN. [OIDs: 1.3.6.1.4.1.116.5.11.1.2.3.1.1.1, 1.3.6.1.4.1.116.5.11.1.2.3.1.1.6]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameHitachi DF LUN Command Statistics
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency51 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical Operator
    Critical Threshold
    Critical Repeat Count
    AlertNoYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    hitachi.df.lun.write.hit.rate

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.116.5.11.1.2.3.1.1.7
    ExpressionNULL
    DescriptionRepresents the write hit rate to LUN. [OIDs: 1.3.6.1.4.1.116.5.11.1.2.3.1.1.1, 1.3.6.1.4.1.116.5.11.1.2.3.1.1.7]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameHitachi DF LUN Command Statistics
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency51 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical Operator
    Critical Threshold
    Critical Repeat Count
    AlertNoYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph