Description
Monitors the hardware parameters of Hitachi disk controllers and disk units such as fan, power supply, processor state, cache and environment. Tested on USP V = RAID600. sysObjectID: enterprises.116.3.11.4.1.1
Prerequisites
SNMP should be enabled in end device and device should support HM800MIB OIDs and SNMP credentials should be attached against the device in portal.
How to Apply: This template is All instance selection based. It will not ask user to select any instance(s) while assigning it to a device.
Metric Parameters
| Parameter | Description |
|---|---|
| Frequency | |
| Warning Threshold | If the metric value satisfies the condition defined along with Warning Threshold value, then a notification is sent to the user. |
| Critical Threshold | If the metric value satisfies the condition defined along with Critical Threshold value, then a notification is sent to the user. |
| Alert | The alert value can be set to either Yes or No. If it is Yes, then an alert message is sent to the user. |
Metrics
hitachi.disk.controller.hardware.processor
Metric Details
| Applicable for | Device |
| SNMP OID | 1.3.6.1.4.1.116.5.11.4.1.1.6.1.2 |
| Expression | NULL |
| Description | This monitor provides the status of the hardware (HW) disk controller (DKC) processor. The possible status values are 1- No Error, 2- Acute, 3- Serious, 4- Moderate, 5- Service. [OID: 1.3.6.1.4.1.116.5.11.4.1.1.6.1.2] |
| Category | SNMP monitors |
| Collector Type | Gateway |
| Monitor Name | Hitachi Disk Controller (DKC) Hardware Monitor |
| Unit |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 5 | 1 – 1440 (mins) |
| Filter | NULL | Not Applicable |
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
| Critical Threshold | 3 | [{"1":"NoError"},{"2":"Acute"},{"3":"Serious"},{"4":"Moderate"},{"5":"Service"}] |
| Critical Repeat Count | 2 | 1-12 |
| Alert | Yes | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
hitachi.disk.controller.hardware.powersupply
Metric Details
| Applicable for | Device |
| SNMP OID | 1.3.6.1.4.1.116.5.11.4.1.1.6.1.6 |
| Expression | NULL |
| Description | This monitor provides the status of the hardware (HW) disk controller (DKC) power supply. The possible status values are 1- No Error , 2- Acute , 3- Serious , 4- Moderate , 5- Service. [OID: 1.3.6.1.4.1.116.5.11.4.1.1.6.1.6] |
| Category | SNMP monitors |
| Collector Type | Gateway |
| Monitor Name | Hitachi Disk Controller (DKC) Hardware Monitor |
| Unit |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 5 | 1 – 1440 (mins) |
| Filter | NULL | Not Applicable |
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
| Critical Threshold | 3 | [{"1":"NoError"},{"2":"Acute"},{"3":"Serious"},{"4":"Moderate"},{"5":"Service"}] |
| Critical Repeat Count | 2 | 1-12 |
| Alert | Yes | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
hitachi.disk.controller.hardware.cache
Metric Details
| Applicable for | Device |
| SNMP OID | 1.3.6.1.4.1.116.5.11.4.1.1.6.1.4 |
| Expression | NULL |
| Description | This monitor provides the status of the hardware (HW) disk controller (DKC) cache. The possible status values are 1- No Error , 2- Acute , 3- Serious , 4- Moderate , 5- Service. [OID: 1.3.6.1.4.1.116.5.11.4.1.1.6.1.4] |
| Category | SNMP monitors |
| Collector Type | Gateway |
| Monitor Name | Hitachi Disk Controller (DKC) Hardware Monitor |
| Unit |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 5 | 1 – 1440 (mins) |
| Filter | NULL | Not Applicable |
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
| Critical Threshold | 3 | [{"1":"NoError"},{"2":"Acute"},{"3":"Serious"},{"4":"Moderate"},{"5":"Service"}] |
| Critical Repeat Count | 2 | 1-12 |
| Alert | Yes | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
hitachi.disk.controller.hardware.fan
Metric Details
| Applicable for | Device |
| SNMP OID | 1.3.6.1.4.1.116.5.11.4.1.1.6.1.8 |
| Expression | NULL |
| Description | This monitor provides the status of the hardware (HW) disk controller (DKC) fan. The possible status values are 1- No Error , 2- Acute , 3- Serious , 4- Moderate , 5- Service. [OID: 1.3.6.1.4.1.116.5.11.4.1.1.6.1.8] |
| Category | SNMP monitors |
| Collector Type | Gateway |
| Monitor Name | Hitachi Disk Controller (DKC) Hardware Monitor |
| Unit |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 5 | 1 – 1440 (mins) |
| Filter | NULL | Not Applicable |
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
| Critical Threshold | 3 | [{"1":"NoError"},{"2":"Acute"},{"3":"Serious"},{"4":"Moderate"},{"5":"Service"}] |
| Critical Repeat Count | 2 | 1-12 |
| Alert | Yes | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
hitachi.disk.controller.hardware.battery
Metric Details
| Applicable for | Device |
| SNMP OID | 1.3.6.1.4.1.116.5.11.4.1.1.6.1.7 |
| Expression | NULL |
| Description | This monitor provides the status of the hardware (HW) disk controller (DKC) battery. The possible status values are 1- No Error , 2- Acute , 3- Serious , 4- Moderate , 5- Service. [OID: 1.3.6.1.4.1.116.5.11.4.1.1.6.1.7] |
| Category | SNMP monitors |
| Collector Type | Gateway |
| Monitor Name | Hitachi Disk Controller (DKC) Hardware Monitor |
| Unit |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 5 | 1 – 1440 (mins) |
| Filter | NULL | Not Applicable |
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
| Critical Threshold | 3 | [{"1":"NoError"},{"2":"Acute"},{"3":"Serious"},{"4":"Moderate"},{"5":"Service"}] |
| Critical Repeat Count | 2 | 1-12 |
| Alert | Yes | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
hitachi.disk.controller.hardware.environment
Metric Details
| Applicable for | Device |
| SNMP OID | 1.3.6.1.4.1.116.5.11.4.1.1.6.1.9 |
| Expression | NULL |
| Description | This monitor provides the status of the hardware (HW) disk controller (DKC) environment. The possible status values are 1- No Error , 2- Acute , 3- Serious , 4- Moderate , 5- Service. [OID: 1.3.6.1.4.1.116.5.11.4.1.1.6.1.9] |
| Category | SNMP monitors |
| Collector Type | Gateway |
| Monitor Name | Hitachi Disk Controller (DKC) Hardware Monitor |
| Unit |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 5 | 1 – 1440 (mins) |
| Filter | NULL | Not Applicable |
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
| Critical Threshold | 3 | [{"1":"NoError"},{"2":"Acute"},{"3":"Serious"},{"4":"Moderate"},{"5":"Service"}] |
| Critical Repeat Count | 2 | 1-12 |
| Alert | Yes | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
hitachi.disk.unit.hardware.environment
Metric Details
| Applicable for | Device |
| SNMP OID | 1.3.6.1.4.1.116.5.11.4.1.1.7.1.4 |
| Expression | NULL |
| Description | This monitor provides the status of the hardware (HW) disk unit (DKU) environment. The possible status values are 1- No Error , 2- Acute , 3- Serious , 4- Moderate , 5- Service. [OID: 1.3.6.1.4.1.116.5.11.4.1.1.7.1.4] |
| Category | SNMP monitors |
| Collector Type | Gateway |
| Monitor Name | Hitachi Disk Unit (DKU) Hardware Monitor |
| Unit |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 5 | 1 – 1440 (mins) |
| Filter | NULL | Not Applicable |
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
| Critical Threshold | 3 | [{"1":"NoError"},{"2":"Acute"},{"3":"Serious"},{"4":"Moderate"},{"5":"Service"}] |
| Critical Repeat Count | 2 | 1-12 |
| Alert | Yes | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
hitachi.disk.unit.hardware.powersupply
Metric Details
| Applicable for | Device |
| SNMP OID | 1.3.6.1.4.1.116.5.11.4.1.1.7.1.2 |
| Expression | NULL |
| Description | This monitor provides the status of the hardware (HW) disk unit (DKU) power supply. The possible status values are 1- No Error , 2- Acute , 3- Serious , 4- Moderate , 5- Service. [OID: 1.3.6.1.4.1.116.5.11.4.1.1.7.1.2] |
| Category | SNMP monitors |
| Collector Type | Gateway |
| Monitor Name | Hitachi Disk Unit (DKU) Hardware Monitor |
| Unit |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 5 | 1 – 1440 (mins) |
| Filter | NULL | Not Applicable |
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
| Critical Threshold | 3 | [{"1":"NoError"},{"2":"Acute"},{"3":"Serious"},{"4":"Moderate"},{"5":"Service"}] |
| Critical Repeat Count | 2 | 1-12 |
| Alert | Yes | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
hitachi.disk.unit.hardware.fan
Metric Details
| Applicable for | Device |
| SNMP OID | 1.3.6.1.4.1.116.5.11.4.1.1.7.1.3 |
| Expression | NULL |
| Description | This monitor provides the status of the hardware (HW) disk unit (DKU) fan. The possible status values are 1- No Error , 2- Acute , 3- Serious , 4- Moderate , 5- Service. [OID: 1.3.6.1.4.1.116.5.11.4.1.1.7.1.3] |
| Category | SNMP monitors |
| Collector Type | Gateway |
| Monitor Name | Hitachi Disk Unit (DKU) Hardware Monitor |
| Unit |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 5 | 1 – 1440 (mins) |
| Filter | NULL | Not Applicable |
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
| Critical Threshold | 3 | [{"1":"NoError"},{"2":"Acute"},{"3":"Serious"},{"4":"Moderate"},{"5":"Service"}] |
| Critical Repeat Count | 2 | 1-12 |
| Alert | Yes | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
hitachi.disk.unit.hardware.drive
Metric Details
| Applicable for | Device |
| SNMP OID | 1.3.6.1.4.1.116.5.11.4.1.1.7.1.5 |
| Expression | NULL |
| Description | This monitor provides the status of the hardware (HW) disk unit (DKU) drive. The possible status values are 1- No Error , 2- Acute , 3- Serious , 4- Moderate , 5- Service. [OID: 1.3.6.1.4.1.116.5.11.4.1.1.7.1.5] |
| Category | SNMP monitors |
| Collector Type | Gateway |
| Monitor Name | Hitachi Disk Unit (DKU) Hardware Monitor |
| Unit |
Possible Inputs
| Metric | Input Value | Range of Values |
|---|---|---|
| Frequency | 5 | 1 – 1440 (mins) |
| Filter | NULL | Not Applicable |
| Warning Operator | ||
| Warning Threshold | ||
| Warning Repeat Count | ||
| Critical Operator | EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
| Critical Threshold | 3 | [{"1":"NoError"},{"2":"Acute"},{"3":"Serious"},{"4":"Moderate"},{"5":"Service"}] |
| Critical Repeat Count | 2 | 1-12 |
| Alert | Yes | Yes/No |
| Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph