Description

Monitors Adaptec Universal Storage (AUS) parameters such as array status, installed memory, battery status, controller status and controller overall status, S.M.A.R.T. status and device status. Validated on the IBM eserver xSeries 346 -[884015U]-Object Id:1.3.6.1.4.1.311.1.1.3.1.2.

Prerequisites

SNMP should be enabled in end device and device should support ADAPTEC-UNIVERSAL-STORAGE-MIB OIDs and SNMP credentials should be attached against the device in portal.

How to Apply: This template is All instance selection based. It will not ask user to select any instance(s) while assigning it to a device.

Metric Parameters

Metric Parameters
ParameterDescription
Frequency
  • Frequency is the interval in which you want to probe and collect metric data from the target device/resource
  • Frequency is defined in minutes (min).
    • Warning ThresholdIf the metric value satisfies the condition defined along with Warning Threshold value, then a notification is sent to the user.
    Critical ThresholdIf the metric value satisfies the condition defined along with Critical Threshold value, then a notification is sent to the user.
    AlertThe alert value can be set to either Yes or No. If it is Yes, then an alert message is sent to the user.

    Metrics

    aus.array.status

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.795.14.1.1000.1.1.11
    ExpressionNULL
    DescriptionMonitors the current health of this array. Possible values are 1- unknown, 2- other, 3- okay, 4- warning, 5- failure. [OID: 1.3.6.1.4.1.795.14.1.1000.1.1.11]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameAUS Array Status
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency51 – 1440 (mins)
    FilterNULLNot Applicable
    Warning OperatorEQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold4[{"1":"unknown"},{"2":"other"},{"3":"okay"},{"4":"warning"},{"5":"failure"}]
    Warning Repeat Count11-12
    Critical OperatorEQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold5[{"1":"unknown"},{"2":"other"},{"3":"okay"},{"4":"warning"},{"5":"failure"}]
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    aus.array.type

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.795.14.1.1000.1.1.4
    ExpressionNULL
    DescriptionRAID level used by this array.
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameAUS Array Status
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency51 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical Operator
    Critical Threshold
    Critical Repeat Count
    AlertNoYes/No
    Graph (Yes/No)NoYes/No

    Sample Output

    No graph

    aus.array.state

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.795.14.1.1000.1.1.12
    ExpressionNULL
    DescriptionMonitors the current health of this array. Possible values are 1- unknown, 2- other, 3- optimal, 4- quickInited, 5- impacted, 6- degraded, 7- failed, 8- compacted. [OID: 1.3.6.1.4.1.795.14.1.1000.1.1.12]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameAUS Array Status
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency51 – 1440 (mins)
    FilterNULLNot Applicable
    Warning OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold5,8[{"1":"unknown"},{"2":"other"},{"3":"optimal"},{"4":"quickInited"},{"5":"impacted"},{"6":"degraded"},{"7":"failed"},{"8":"compacted"}]
    Warning Repeat Count11-12
    Critical OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold6,7[{"1":"unknown"},{"2":"other"},{"3":"optimal"},{"4":"quickInited"},{"5":"impacted"},{"6":"degraded"},{"7":"failed"},{"8":"compacted"}]
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    aus.controller.installed.memory

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.795.14.1.201.1.1.12,
    1.3.6.1.4.1.795.14.1.201.1.1.7
    ExpressionausControllerInstalledMemory
    DescriptionMonitors the memory installed on this controller in megabytes. [OID: 1.3.6.1.4.1.795.14.1.201.1.1.12]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameAUS Controller Monitors
    UnitMB

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency51 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical Operator
    Critical Threshold
    Critical Repeat Count
    AlertNoYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    aus.controller.battery.status

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.795.14.1.201.1.1.14
    ExpressionNULL
    DescriptionMonitors the status of battery for this controller. [OID: 1.3.6.1.4.1.795.14.1.201.1.1.14]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameAUS Controller Monitors
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency51 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical OperatorEQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold6[{"1":"unknown"},{"2":"other"},{"3":"notApplicable"},{"4":"notInstalled"},{"5":"okay"},{"6":"failed"},{"7":"charging"},{"8":"discharging"},{"9":"inMaintenanceMode"}]
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    aus.controller.oper.status

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.795.14.1.201.1.1.15
    ExpressionNULL
    DescriptionMonitors the operational status of this controller. Possible values are 1- unknown, 2- other, 3- okay, 4- warning, 5- failure. [OID: 1.3.6.1.4.1.795.14.1.201.1.1.15]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameAUS Controller Monitors
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency51 – 1440 (mins)
    FilterNULLNot Applicable
    Warning OperatorEQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold4[{"1":"unknown"},{"2":"other"},{"3":"okay"},{"4":"warning"},{"5":"failure"}]
    Warning Repeat Count11-12
    Critical OperatorEQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold5[{"1":"unknown"},{"2":"other"},{"3":"okay"},{"4":"warning"},{"5":"failure"}]
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    aus.controller.overall.status

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.795.14.1.201.1.1.16
    ExpressionNULL
    DescriptionMonitors the overall operational status of this controller and its children. This is the 'worst' status of the controller status and that of all arrays and un-arrayed devices attached to this controller. Possible values are 1- unknown, 2- other, 3- okay, 4- warning, 5- failure.
    [OID: 1.3.6.1.4.1.795.14.1.201.1.1.16]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameAUS Controller Monitors
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency51 – 1440 (mins)
    FilterNULLNot Applicable
    Warning OperatorEQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold4[{"1":"unknown"},{"2":"other"},{"3":"okay"},{"4":"warning"},{"5":"failure"}]
    Warning Repeat Count11-12
    Critical OperatorEQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold5[{"1":"unknown"},{"2":"other"},{"3":"okay"},{"4":"warning"},{"5":"failure"}]
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    aus.device.oper.status

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.795.14.1.400.1.1.11
    ExpressionNULL
    DescriptionMonitors the operational status of the device. Possible values are 1- unknown, 2- other, 3- okay, 4- warning, 5- failure. [OID: 1.3.6.1.4.1.795.14.1.400.1.1.11]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameAUS Device Status
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency51 – 1440 (mins)
    FilterNULLNot Applicable
    Warning OperatorEQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold4[{"1":"unknown"},{"2":"other"},{"3":"okay"},{"4":"warning"},{"5":"failure"}]
    Warning Repeat Count11-12
    Critical OperatorEQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold5[{"1":"unknown"},{"2":"other"},{"3":"okay"},{"4":"warning"},{"5":"failure"}]
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    aus.device.type

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.795.14.1.400.1.1.4
    ExpressionNULL
    DescriptionGives the device type for this device.
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameAUS Device Status
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency51 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical Operator
    Critical Threshold
    Critical Repeat Count
    AlertNoYes/No
    Graph (Yes/No)NoYes/No

    Sample Output

    No graph

    aus.storage.smart.status

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.795.14.1.410.1.1.8,
    1.3.6.1.4.1.795.14.1.410.1.1.2
    ExpressionausStorageDeviceSmartStatus
    DescriptionMonitors the S.M.A.R.T. status of this storage device. Possible values are 1- unknown, 2- notSupported, 3- notEnabled, 4- okay, 5- errorPredicted. [OID: 1.3.6.1.4.1.795.14.1.410.1.1.8]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameAUS Storage SMART Status
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency51 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical OperatorEQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold5[{"1":"unknown"},{"2":"notSupported"},{"3":"notEnabled"},{"4":"okay"},{"5":"errorPredicted"}]
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph