Description

Monitors the OSPF router operational status and also monitors the statistics like Rate of OSPF neighbors, Rate of OSPF adjacent neighbors.

Prerequisites

SNMP should be enabled in end device and device should support Juniper-OSPF-MIB OIDs and SNMP credentials should be attached against the device in portal.

How to Apply: This template is All instance selection based. It will not ask user to select any instance(s) while assigning it to a device.

Metric Parameters

Metric Parameters
ParameterDescription
Frequency
  • Frequency is the interval in which you want to probe and collect metric data from the target device/resource
  • Frequency is defined in minutes (min).
  • Warning ThresholdIf the metric value satisfies the condition defined along with Warning Threshold value, then a notification is sent to the user.
    Critical ThresholdIf the metric value satisfies the condition defined along with Critical Threshold value, then a notification is sent to the user.
    AlertThe alert value can be set to either Yes or No. If it is Yes, then an alert message is sent to the user.

    Metrics

    juniper.ospf.interface.neighbors.rate

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.4874.2.2.14.1.7.1.4
    ExpressionNULL
    DescriptionMonitors the rate of OSPF neighbors from this interface. [OIDs: 1.3.6.1.2.1.14.7.1.1, 1.3.6.1.4.1.4874.2.2.14.1.7.1.4]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameJuniper Inerface OSPF-Specific Characteristics
    Unitpsec

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical Operator
    Critical Threshold
    Critical Repeat Count
    AlertNoYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    juniper.ospf.interface.adjacent.neighbors.rate

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.4874.2.2.14.1.7.1.5
    ExpressionNULL
    DescriptionRate of OSPF adjacent neighbors from this interface. [OIDs: 1.3.6.1.2.1.14.7.1.1, 1.3.6.1.4.1.4874.2.2.14.1.7.1.5]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameJuniper Inerface OSPF-Specific Characteristics
    Unitpsec

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical Operator
    Critical Threshold
    Critical Repeat Count
    AlertNoYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    juniper.ospf.router.status

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.4874.2.2.14.1.1.35.0
    ExpressionNULL
    DescriptionIt checks whether this router is operational or not. [OID: 1.3.6.1.4.1.4874.2.2.14.1.1.35]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameJuniper OSPF Router Status
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    Filter
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical OperatorEQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold2[{"1":"Operational"},{"2":"Not-Operational"}]
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph