Description
Applicable on all series like the EX series, SRX series, J series, MX series and M series. Monitors CPU utilization, memory utilization, buffer utilization, CPU load, temperature, operational state, FRU state and device uptime.
Prerequisites
SNMP should be enabled in end device and device should support JUNIPER-MIB OIDs and SNMP credentials should be attached against the device in portal.
How to Apply: This template is All instance selection based and Automatic select instance based. It will not ask user to select any instance (s) while assigning it to a device.
Metric Parameters
Parameter | Description |
---|---|
Frequency | Warning Threshold | If the metric value satisfies the condition defined along with Warning Threshold value, then a notification is sent to the user. |
Critical Threshold | If the metric value satisfies the condition defined along with Critical Threshold value, then a notification is sent to the user. |
Alert | The alert value can be set to either Yes or No. If it is Yes, then an alert message is sent to the user. |
Metrics
system.uptime
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.2.1.1.3.0 |
Expression | sysUpTime/100 |
Description | The time since the SNMP agent in the system was last re-initialized.[OID : 1.3.6.1.2.1.1.3.0] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | System Uptime |
Unit | s |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | 1 – 1440 (mins) |
Filter | ||
Warning Operator | ||
Warning Threshold | ||
Warning Repeat Count | ||
Critical Operator | LESS_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 1800 | |
Critical Repeat Count | 1 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
kernel.memory.util
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.2636.3.1.16.0 |
Expression | NULL |
Description | The percentage of kernel memory used of this subject. 0 if unavailable or inapplicable. |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Juniper Kernel Memory Utilization |
Unit | % |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | 1 – 1440 (mins) |
Filter | ||
Warning Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Warning Threshold | 80 | 0-100 |
Warning Repeat Count | 1 | 1-12 |
Critical Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 90 | 0-100 |
Critical Repeat Count | 1 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
juniper.common.app.storageutilization
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.2636.3.31.1.1.1.1 |
Expression | NULL |
Description | The amount of the storage used by each file system on the router in percentage. [OIDs: 1.3.6.1.2.1.25.2.3.1.2, 1.3.6.1.2.1.25.2.3.1.3, 1.3.6.1.4.1.2636.3.31.1.1.1.1] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Juniper Storage Utilization |
Unit | % |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | 1 – 1440 (mins) |
Filter | hrStorageType In string list 1.3.6.1.2.1.25.2.1.4,1.3.6.1.2.1.25.2.1.9 Name Regex match .(ad|da)d+. | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Warning Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Warning Threshold | 80 | 0-100 |
Warning Repeat Count | 1 | 1-12 |
Critical Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 90 | 0-100 |
Critical Repeat Count | 1 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
cpu.utilization
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.2636.3.1.13.1.8 |
Expression | NULL |
Description | Monitors CPU usage by the Routing Engine. Zero if unavailable or inapplicable |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Juniper CPU Monitor |
Unit | % |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | 1 – 1440 (mins) |
Filter | Name Regex match (.Routing Engine.|.FPC.) | |
Warning Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Warning Threshold | 80 | 0-100 |
Warning Repeat Count | 2 | 1-12 |
Critical Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 90 | 0-100 |
Critical Repeat Count | 2 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
cpu.load
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.2636.3.1.13.1.21 |
Expression | NULL |
Description | Routing Engine load averages for the last 5 min. This value needs to be correlated with CPU usage. A value lesser than 100 indicates normal operation. A value in the range of 100-300 along with a CPU utilization of greater than 70% could require some inv. |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Juniper CPU Monitor |
Unit | % |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | 1 – 1440 (mins) |
Filter | Name Regex match (.Routing Engine.|.FPC.) | |
Warning Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Warning Threshold | 100 | |
Warning Repeat Count | 1 | 1-12 |
Critical Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 300 | |
Critical Repeat Count | 1 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
memory.utilization
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.2636.3.1.13.1.12, 1.3.6.1.4.1.2636.3.1.13.1.15 |
Expression | jnxOperatingHeap |
Description | Indicates the heap utilization and memory size. Zero if unavailable or inapplicable. [OIDs: 1.3.6.1.4.1.2636.3.1.13.1.12, 1.3.6.1.4.1.2636.3.1.13.1.15] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Juniper Memory Monitor |
Unit | % |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | 1 – 1440 (mins) |
Filter | Name Regex match (.Routing Engine.|.FPC.) | |
Warning Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Warning Threshold | 80 | 0-100 |
Warning Repeat Count | 1 | 1-12 |
Critical Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 90 | 0-100 |
Critical Repeat Count | 1 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
juniper.buffer.utilization
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.2636.3.1.13.1.11 |
Expression | NULL |
Description | The buffer pool utilization in percentage. Zero if unavailable or inapplicable [OIDs:1.3.6.1.4.1.2636.3.1.13.1.5, 1.3.6.1.4.1.2636.3.1.13.1.11] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Juniper Memory Monitor |
Unit | % |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | 1 – 1440 (mins) |
Filter | Name Regex match (.Routing Engine.|.FPC.) | |
Warning Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Warning Threshold | 90 | 0-100 |
Warning Repeat Count | 1 | 1-12 |
Critical Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 95 | 0-100 |
Critical Repeat Count | 1 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
juniper.buffer.free
Metric Details
Applicable for | Device |
SNMP OID | NULL |
Expression | (1-(jnxOperatingBuffer/100))*(jnxOperatingMemory*1000000) |
Description | Monitors the buffer pool free. [OID: 1.3.6.1.4.1.2636.3.1.13.1.11, 1.3.6.1.4.1.2636.3.1.13.1.15] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Juniper Memory Monitor |
Unit | Bytes |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | 1 – 1440 (mins) |
Filter | Name Regex match (.Routing Engine.|.FPC.) | |
Warning Operator | ||
Warning Threshold | ||
Warning Repeat Count | ||
Critical Operator | ||
Critical Threshold | ||
Critical Repeat Count | ||
Alert | No | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
juniper.operational.state
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.2636.3.1.13.1.6 |
Expression | NULL |
Description | Indicates the operating state of this subject. Possible values are 1- Unknown 2- Running 3- Ready 4- Reset 5- Running at full speed 6- Down 7- Standby [OID: 1.3.6.1.4.1.2636.3.1.13.1.5, 1.3.6.1.4.1.2636.3.1.13.1.6] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Juniper Operational Status |
Unit |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | 1 – 1440 (mins) |
Filter | Name Regex no match (^$) | |
Warning Operator | IN_LIST | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Warning Threshold | 1,4 | [{"1":"unknown"},{"2":"running"},{"3":"ready"},{"4":"reset"},{"5":"runningAtFullSpeed"},{"6":"down"},{"7":"standby"}] |
Warning Repeat Count | 1 | 1-12 |
Critical Operator | EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 6 | [{"1":"unknown"},{"2":"running"},{"3":"ready"},{"4":"reset"},{"5":"runningAtFullSpeed"},{"6":"down"},{"7":"standby"}] |
Critical Repeat Count | 1 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
system.temperature
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.2636.3.1.13.1.7 |
Expression | NULL |
Description | Indicates the temperature sensor value. [OID: 1.3.6.1.4.1.2636.3.1.13.1.7] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Juniper Temperature Monitor |
Unit | C |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | 1 – 1440 (mins) |
Filter | Name Regex match (.Routing Engine.|.PEM.|.FPC.) | |
Warning Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Warning Threshold | 38 | 0 - 4294967295 |
Warning Repeat Count | 1 | 1-12 |
Critical Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 40 | 0 - 4294967295 |
Critical Repeat Count | 1 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
juniper.fru.state
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.2636.3.1.15.1.8 |
Expression | NULL |
Description | Represents the FRU state. Possible states are 1- Unknown 2- Empty, 3- Present, 4- Ready 5- AnnounceOnline, 6- Online, 7- AnnounceOffline, 8- Offline, 9- Diagnostic, 10- Standby. [OIDs: 1.3.6.1.4.1.2636.3.1.15.1.5, 1.3.6.1.4.1.2636.3.1.15.1.6, 1.3.6.1.4.1.2636.3.1.15.1.8, 1.3.6.1.4.1.2636.3.1.15.1.9]. |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Juniper FRU Status |
Unit |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | 1 – 1440 (mins) |
Filter | Name Regex no match (^$) | |
Warning Operator | IN_LIST | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Warning Threshold | 1,7 | [{"1":"unknown"},{"2":"empty"},{"3":"present"},{"4":"ready"},{"5":"announceOnline"},{"6":"online"},{"7":"anounceOffline"},{"8":"offline"},{"9":"diagnostic"},{"10":"standby"}] |
Warning Repeat Count | 1 | 1-12 |
Critical Operator | EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 8 | [{"1":"unknown"},{"2":"empty"},{"3":"present"},{"4":"ready"},{"5":"announceOnline"},{"6":"online"},{"7":"anounceOffline"},{"8":"offline"},{"9":"diagnostic"},{"10":"standby"}] |
Critical Repeat Count | 1 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
juniper.fru.type
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.2636.3.1.15.1.6 |
Expression | NULL |
Description | The FRU type for this subject. [OID: 1.3.6.1.4.1.2636.3.1.15.1.6] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Juniper FRU Status |
Unit |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | 1 – 1440 (mins) |
Filter | Name Regex no match (^$) | |
Warning Operator | ||
Warning Threshold | ||
Warning Repeat Count | ||
Critical Operator | ||
Critical Threshold | ||
Critical Repeat Count | ||
Alert | No | Yes/No |
Graph (Yes/No) | No | Yes/No |
Sample Output
No graph
juniper.virtualchassis.fru.temperature
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.2636.3.1.15.1.9 |
Expression | NULL |
Description | Monitors the temperature in Celsius (degrees C) of this juniper switch. The value of this monitor is zero if unavailable or inapplicable. [OIDs: 1.3.6.1.4.1.2636.3.1.15.1.5, 1.3.6.1.4.1.2636.3.1.15.1.9] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Juniper FRU Temperature |
Unit | C |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | 1 – 1440 (mins) |
Filter | Name Regex match (.Routing Engine.|.PEM.|.FPC.) | |
Warning Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Warning Threshold | 48 | 0 - 4294967295 |
Warning Repeat Count | 1 | 1-12 |
Critical Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 52 | 0 - 4294967295 |
Critical Repeat Count | 1 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output