Description

Monitors the VPLS BGP RT Row Status, VPLS BGP VE Row Status, VPLS config row status, peer count, operational status, bgp auto discovery row status and VPLS PW Bind Row Status.

Prerequisites

SNMP should be enabled in end device and device should support VPLS-GENERIC-DRAFT-01-MIB, VPLS-BGP-DRAFT-01-MIB OIDs and SNMP credentials should be attached against the device in portal.

How to Apply: This template is All instance selection based. It will not ask user to select any instance(s) while assigning it to a device.

Metric Parameters

Metric Parameters
ParameterDescription
Frequency
  • Frequency is the interval in which you want to probe and collect metric data from the target device/resource
  • Frequency is defined in minutes (min).
  • Warning ThresholdIf the metric value satisfies the condition defined along with Warning Threshold value, then a notification is sent to the user.
    Critical ThresholdIf the metric value satisfies the condition defined along with Critical Threshold value, then a notification is sent to the user.
    AlertThe alert value can be set to either Yes or No. If it is Yes, then an alert message is sent to the user.

    Metrics

    juniper.vpls.bgprte.row.status

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.2636.5.8.1.2.1.2,
    1.3.6.1.4.1.2636.5.8.1.2.1.4, 1.3.6.1.4.1.2636.5.8.1.6.1.4, 1.3.6.1.4.1.2636.5.8.1.6.1.3
    Expressionif ((jnxVplsConfigAdminStatus==1),jnxVplsBgpRteTargetRTRowStatus,0)
    DescriptionMonitors the VPLS BGP route target row status. Possible values are 1- active: which indicates that the conceptual row is available for use by the managed device, 2- notInService: which indicates that the conceptual row exists in the agent, but is unavailable for use by the managed device, 3- notReady: which indicates that the conceptual row exists in the agent, but is missing information necessary in order to be available for use by the managed device, 4- createAndGo: which is supplied by a management station wishing to create a new instance of a conceptual row and to have its status automatically set to active, making it available for use by the managed device, 5- createAndWait: which is supplied by a management station wishing to create a new instance of a conceptual row (but not make it available for use by the managed device), 6- destroy: which is supplied by a management station wishing to delete all of the instances associated with an existing conceptual row. [OIDs: 1.3.6.1.4.1.2636.5.8.1.2.1.2, .3.6.1.4.1.2636.5.8.1.2.1.4, 1.3.6.1.4.1.2636.5.8.1.6.1.3, 1.3.6.1.4.1.2636.5.8.1.6.1.4]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameJuniper VPLS BGP RT Row Status
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical OperatorEQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold6[{"0":"VPLSAdminstrativeyDown"},{"1":"active"},{"2":"notInService"},{"3":"notReady"},{"4":"createAndGo"},{"5":"createAndWait"},{"6":"destroy"}]
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    juniper.vpls.bgpve.row.status

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.2636.5.8.1.2.1.2,
    1.3.6.1.4.1.2636.5.8.1.2.1.4, 1.3.6.1.4.1.2636.5.10.1.2.1.2, 1.3.6.1.4.1.2636.5.10.1.2.1.5
    Expressionif ((jnxVplsConfigAdminStatus==1),jnxVplsBgpVERowStatus,0)
    DescriptionMonitors the VPLS BGP edge device row status. Possible values are 1- active: which indicates that the conceptual row is available for use by the managed device, 2- notInService: which indicates that the conceptual row exists in the agent, but is unavailable for use by the managed device, 3- notReady: which indicates that the conceptual row exists in the agent, but is missing information necessary in order to be available for use by the managed device, 4- createAndGo: which is supplied by a management station wishing to create a new instance of a conceptual row and to have its status automatically set to active, making it available for use by the managed device, 5- createAndWait: which is supplied by a management station wishing to create a new instance of a conceptual row (but not make it available for use by the managed device), 6- destroy: which is supplied by a management station wishing to delete all of the instances associated with an existing conceptual row. [OIDs: 1.3.6.1.4.1.2636.5.8.1.2.1.2, .3.6.1.4.1.2636.5.8.1.2.1.4, 1.3.6.1.4.1.2636.5.10.1.2.1.2, 1.3.6.1.4.1.2636.5.10.1.2.1.5]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameJuniper VPLS BGP VE Row Status
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical OperatorEQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold6[{"0":"VPLSAdminstrativeyDown"},{"1":"active"},{"2":"notInService"},{"3":"notReady"},{"4":"createAndGo"},{"5":"createAndWait"},{"6":"destroy"}]
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    juniper.vpls.config.row.status

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.2636.5.8.1.2.1.12,
    1.3.6.1.4.1.2636.5.8.1.2.1.4
    Expressionif ((jnxVplsConfigAdminStatus==1),jnxVplsConfigRowStatus,0)
    DescriptionMonitors the VPLS configuration row status. Possible values are 1- active: which indicates that the conceptual row is available for use by the managed device, 2- notInService: which indicates that the conceptual row exists in the agent, but is unavailable for use by the managed device, 3- notReady: which indicates that the conceptual row exists in the agent, but is missing information necessary in order to be available for use by the managed device, 4- createAndGo: which is supplied by a management station wishing to create a new instance of a conceptual row and to have its status automatically set to active, making it available for use by the managed device, 5- createAndWait: which is supplied by a management station wishing to create a new instance of a conceptual row (but not make it available for use by the managed device), 6- destroy: which is supplied by a management station wishing to delete all of the instances associated with an existing conceptual row. [OIDs: 1.3.6.1.4.1.2636.5.8.1.2.1.2, 1.3.6.1.4.1.2636.5.8.1.2.1.4, 1.3.6.1.4.1.2636.5.8.1.2.1.12]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameJuniper VPLS Configuration Attributes
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical OperatorEQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold6[{"0":"VPLSAdminstrativeyDown"},{"1":"active"},{"2":"notInService"},{"3":"notReady"},{"4":"createAndGo"},{"5":"createAndWait"},{"6":"destroy"}]
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    juniper.vpls.peer.count

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.2636.5.8.1.3.1.2
    Expressionif ((jnxVplsConfigAdminStatus==1),jnxVplsStatusPeerCount,0)
    DescriptionMonitors the number of peers present in this vpls instance. [OIDs: 1.3.6.1.4.1.2636.5.8.1.2.1.2, 1.3.6.1.4.1.2636.5.8.1.2.1.4, 1.3.6.1.4.1.2636.5.8.1.3.1.2]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameJuniper VPLS Configuration Attributes
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical Operator
    Critical Threshold
    Critical Repeat Count
    AlertNoYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    juniper.vpls.oper.status

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.2636.5.8.1.3.1.1
    Expressionif ((jnxVplsConfigAdminStatus==1),jnxVplsStatusOperStatus,3)
    DescriptionMonitors the current operational state of this VPLS Service. [OIDs: 1.3.6.1.4.1.2636.5.8.1.2.1.2, 1.3.6.1.4.1.2636.5.8.1.2.1.4, 1.3.6.1.4.1.2636.5.8.1.3.1.1]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameJuniper VPLS Configuration Attributes
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical OperatorEQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold2[{"0":"other"},{"1":"up"},{"2":"down"},{"3":"AdminstrativeyDown"}]
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    juniper.vpls.bgpadc.row.status

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.2636.5.8.1.5.1.4
    Expressionif ((jnxVplsConfigAdminStatus==1),jnxVplsBgpADConfigRowStatus,0)
    DescriptionMonitors the VPLS BGP auto discovery config row status. Possible values are 1- active: which indicates that the conceptual row is available for use by the managed device, 2- notInService: which indicates that the conceptual row exists in the agent, but is unavailable for use by the managed device, 3- notReady: which indicates that the conceptual row exists in the agent, but is missing information necessary in order to be available for use by the managed device, 4- createAndGo: which is supplied by a management station wishing to create a new instance of a conceptual row and to have its status automatically set to active, making it available for use by the managed device, 5- createAndWait: which is supplied by a management station wishing to create a new instance of a conceptual row (but not make it available for use by the managed device), 6- destroy: which is supplied by a management station wishing to delete all of the instances associated with an existing conceptual row. [OID: 1.3.6.1.4.1.2636.5.8.1.5.1.4]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameJuniper VPLS Configuration Attributes
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical OperatorEQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold6[{"0":"VPLSAdminstrativeyDown"},{"1":"active"},{"2":"notInService"},{"3":"notReady"},{"4":"createAndGo"},{"5":"createAndWait"},{"6":"destroy"}]
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    juniper.vpls.pwbind.row.status

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.2636.5.8.1.2.1.2,
    1.3.6.1.4.1.2636.5.8.1.2.1.4, 1.3.6.1.4.1.2636.5.8.1.4.1.3, 1.3.6.1.4.1.2636.5.8.1.4.1.5
    Expressionif ((jnxVplsConfigAdminStatus==1),jnxVplsPwBindRowStatus,0)
    DescriptionMonitors the Pseudo Wires bind row status. Possible values are 1- active: which indicates that the conceptual row is available for use by the managed device, 2- notInService: which indicates that the conceptual row exists in the agent, but is unavailable for use by the managed device, 3- notReady: which indicates that the conceptual row exists in the agent, but is missing information necessary in order to be available for use by the managed device, 4- createAndGo: which is supplied by a management station wishing to create a new instance of a conceptual row and to have its status automatically set to active, making it available for use by the managed device, 5- createAndWait: which is supplied by a management station wishing to create a new instance of a conceptual row (but not make it available for use by the managed device), 6- destroy: which is supplied by a management station wishing to delete all of the instances associated with an existing conceptual row. [OIDs: 1.3.6.1.4.1.2636.5.8.1.4.1, 1.3.6.1.4.1.2636.5.8.1.4.1.5, 1.3.6.1.4.1.2636.5.8.1.2.1.2, .3.6.1.4.1.2636.5.8.1.2.1.4]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameJuniper VPLS PW Bind Row Status
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical OperatorEQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold6[{"0":"VPLSAdminstrativeyDown"},{"1":"active"},{"2":"notInService"},{"3":"notReady"},{"4":"createAndGo"},{"5":"createAndWait"},{"6":"destroy"}]
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph