Description
Template to monitors Liebert system health parameters like Dehumidifying State, Heating State, Cooling Capacity, Cooling State, Humidifying State, System State, humidity value and temperature value. [Validated on Liebert IS-UNITY-DP Communications Card. SysObjId: 1.3.6.1.4.1.476.1.42]
Prerequisites
SNMP should be enabled in end device and device should support LIEBERT-GP-ENVIRONMENTAL-MIB and SNMP credentials should be attached against the device in portal.
How to Apply: This template is All instance selection based. It will not ask user to select any instance(s) while assigning it to a device.
Metric Parameters
Parameter | Description |
---|---|
Frequency | Warning Threshold | If the metric value satisfies the condition defined along with Warning Threshold value, then a notification is sent to the user. |
Critical Threshold | If the metric value satisfies the condition defined along with Critical Threshold value, then a notification is sent to the user. |
Alert | The alert value can be set to either Yes or No. If it is Yes, then an alert message is sent to the user. |
Metrics
vertiv.liebert.humidity.value
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.476.1.42.3.4.2.2.3.1.3, 1.3.6.1.4.1.476.1.42.3.4.2.2.3.1.2 |
Expression | lgpEnvHumidityMeasurementRel |
Description | It monitors the measured humidity value. Units: percent Relative Humidity. [LIEBERT-GP-ENVIRONMENTAL-MIB::lgpEnvHumidityMeasurementRel - 1.3.6.1.4.1.476.1.42.3.4.2.2.3.1.3, lgpEnvHumidityDescrRel - 1.3.6.1.4.1.476.1.42.3.4.2.2.3.1.2] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Liebert Environmental Humidity |
Unit | % |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 5 | 1 – 1440 (mins) |
Filter | NULL | Not Applicable |
Warning Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Warning Threshold | 80 | 0-100 |
Warning Repeat Count | 1 | 1-12 |
Critical Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 100 | 0-100 |
Critical Repeat Count | 1 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
vertiv.liebert.system.state
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.476.1.42.3.4.3.1.0 |
Expression | NULL |
Description | It monitors the present state of the Liebert system. Possible state values are 1: on, 2: off, 3: standby. [LIEBERT-GP-ENVIRONMENTAL-MIB::lgpEnvStateSystem - 1.3.6.1.4.1.476.1.42.3.4.3.1.0] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Liebert Environmental States |
Unit |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 5 | 1 – 1440 (mins) |
Filter | ||
Warning Operator | IN_LIST | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Warning Threshold | 2,3 | [{"1":"on"},{"2":"off"},{"3":"standby"}] |
Warning Repeat Count | 1 | 1-12 |
Critical Operator | ||
Critical Threshold | ||
Critical Repeat Count | ||
Alert | Yes | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
vertiv.liebert.cooling.state
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.476.1.42.3.4.3.2.0 |
Expression | NULL |
Description | It monitors the present state of the cooling subsystem. Possible state values are 1:On, 2:Off. [LIEBERT-GP-ENVIRONMENTAL-MIB::lgpEnvStateCooling - 1.3.6.1.4.1.476.1.42.3.4.3.2.0] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Liebert Environmental States |
Unit |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 5 | 1 – 1440 (mins) |
Filter | ||
Warning Operator | EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Warning Threshold | 2 | [{"1":"on"},{"2":"off"}] |
Warning Repeat Count | 1 | 1-12 |
Critical Operator | ||
Critical Threshold | ||
Critical Repeat Count | ||
Alert | Yes | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
vertiv.liebert.heating.state
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.476.1.42.3.4.3.3.0 |
Expression | NULL |
Description | It monitors the present state of the heating subsystem. Possible state values are 1:On, 2:Off. [LIEBERT-GP-ENVIRONMENTAL-MIB::lgpEnvStateHeating - 1.3.6.1.4.1.476.1.42.3.4.3.3.0] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Liebert Environmental States |
Unit |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 5 | 1 – 1440 (mins) |
Filter | ||
Warning Operator | EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Warning Threshold | 2 | [{"1":"on"},{"2":"off"}] |
Warning Repeat Count | 1 | 1-12 |
Critical Operator | ||
Critical Threshold | ||
Critical Repeat Count | ||
Alert | Yes | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
vertiv.liebert.humidifier.state
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.476.1.42.3.4.3.4.0 |
Expression | NULL |
Description | It monitors the present state of the humidifier subsystem. Possible state values are 1: on, 2: off. [LIEBERT-GP-ENVIRONMENTAL-MIB::lgpEnvStateHumidifying 1.3.6.1.4.1.476.1.42.3.4.3.4.0] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Liebert Environmental States |
Unit |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 5 | 1 – 1440 (mins) |
Filter | ||
Warning Operator | EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Warning Threshold | 2 | [{"1":"on"},{"2":"off"}] |
Warning Repeat Count | 1 | 1-12 |
Critical Operator | ||
Critical Threshold | ||
Critical Repeat Count | ||
Alert | Yes | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
vertiv.liebert.dehumidifier.state
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.476.1.42.3.4.3.5.0 |
Expression | NULL |
Description | It monitors the present state of the dehumidifier subsystem. Possible state values are 1:on, 2:off. [LIEBERT-GP-ENVIRONMENTAL-MIB::lgpEnvStateDehumidifying - 1.3.6.1.4.1.476.1.42.3.4.3.5.0] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Liebert Environmental States |
Unit |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 5 | 1 – 1440 (mins) |
Filter | ||
Warning Operator | EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Warning Threshold | 2 | [{"1":"on"},{"2":"off"}] |
Warning Repeat Count | 1 | 1-12 |
Critical Operator | ||
Critical Threshold | ||
Critical Repeat Count | ||
Alert | Yes | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
vertiv.liebert.cooling.capacity
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.476.1.42.3.4.3.9.0 |
Expression | NULL |
Description | It monitors the percentage of the cooling capacity presently in use. [LIEBERT-GP-ENVIRONMENTAL-MIB::lgpEnvStateCoolingCapacity - 1.3.6.1.4.1.476.1.42.3.4.3.9.0] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Liebert Environmental States |
Unit | % |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 5 | 1 – 1440 (mins) |
Filter | ||
Warning Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Warning Threshold | 80 | 0-100 |
Warning Repeat Count | 1 | 1-12 |
Critical Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 90 | 0-100 |
Critical Repeat Count | 1 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
vertiv.liebert.temperature.value
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.476.1.42.3.4.1.2.3.1.3, 1.3.6.1.4.1.476.1.42.3.4.1.2.3.1.2 |
Expression | lgpEnvTemperatureMeasurementDegF |
Description | It monitors the measured temperature value. Units: degrees Fahrenheit. [LIEBERT-GP-ENVIRONMENTAL-MIB::lgpEnvTemperatureDescrDegF - 1.3.6.1.4.1.476.1.42.3.4.1.2.3.1.2 lgpEnvTemperatureMeasurementDegF - 1.3.6.1.4.1.476.1.42.3.4.1.2.3.1.3] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Liebert Environmental Temperature |
Unit | F |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 5 | 1 – 1440 (mins) |
Filter | NULL | Not Applicable |
Warning Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Warning Threshold | 90 | |
Warning Repeat Count | 1 | 1-12 |
Critical Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 100 | |
Critical Repeat Count | 1 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph