Description
Monitors McAfee NSP (Network Security Platform) sensor health, performance statistics, chassis modules (fan, power, temperature) status and sensor packets count that have been sent/received with bad CRC on interface ports.
Prerequisites
SNMP should be enabled in end device and device should support MCAFEE-SENSOR-PERF-MIB, MCAFEE-SENSOR-CONF-MIB OIDs and SNMP credentials should be attached against the device in portal.
How to Apply: This template is All instance selection based. It will not ask user to select any instance(s) while assigning it to a device.
Metric Parameters
Parameter | Description |
---|---|
Frequency | Warning Threshold | If the metric value satisfies the condition defined along with Warning Threshold value, then a notification is sent to the user. |
Critical Threshold | If the metric value satisfies the condition defined along with Critical Threshold value, then a notification is sent to the user. |
Alert | The alert value can be set to either Yes or No. If it is Yes, then an alert message is sent to the user. |
Metrics
mcafee.nsp.sensor.crcerror.pkts.out
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.8962.2.1.3.1.1.3.1.12.2 |
Expression | NULL |
Description | Provides total count of packets that have been sent with bad CRC. [OID: 1.3.6.1.4.1.8962.2.1.3.1.1.3.1.12.2] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | McAfee NSP Sensor Port CRC Errors |
Unit | None |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | 1 – 1440 (mins) |
Filter | NULL | Not Applicable |
Warning Operator | ||
Warning Threshold | ||
Warning Repeat Count | ||
Critical Operator | ||
Critical Threshold | ||
Critical Repeat Count | ||
Alert | No | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
mcafee.nsp.sensor.crcerror.pkts.in
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.8962.2.1.3.1.1.3.1.6.2 |
Expression | NULL |
Description | Provides total count of packets that have been received with bad CRC. [OID: 1.3.6.1.4.1.8962.2.1.3.1.1.3.1.6.2] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | McAfee NSP Sensor Port CRC Errors |
Unit | None |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | 1 – 1440 (mins) |
Filter | NULL | Not Applicable |
Warning Operator | ||
Warning Threshold | ||
Warning Repeat Count | ||
Critical Operator | ||
Critical Threshold | ||
Critical Repeat Count | ||
Alert | No | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
mcafee.nsp.sensor.avg.tcp.and.udp.flows
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.8962.2.1.3.1.1.6.1.1.2 |
Expression | NULL |
Description | Gives the average percentage of the used TCP and UDP flows across all PEs. [OID: 1.3.6.1.4.1.8962.2.1.3.1.1.6.1.1.2] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | McAfee NSP Sensor Monitoring |
Unit | % |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | 1 – 1440 (mins) |
Filter | ||
Warning Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Warning Threshold | 70 | 0-100 |
Warning Repeat Count | 1 | 1-12 |
Critical Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 80 | 0-100 |
Critical Repeat Count | 1 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
mcafee.nsp.sensor.avg.ip.fragment.flows
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.8962.2.1.3.1.1.6.1.3.2 |
Expression | NULL |
Description | Gives the average percentage of the used IP Fragment flows across all PEs. [OID: 1.3.6.1.4.1.8962.2.1.3.1.1.6.1.3.2] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | McAfee NSP Sensor Monitoring |
Unit | % |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | 1 – 1440 (mins) |
Filter | ||
Warning Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Warning Threshold | 70 | 0-100 |
Warning Repeat Count | 1 | 1-12 |
Critical Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 80 | 0-100 |
Critical Repeat Count | 1 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
mcafee.nsp.sensor.avg.icmp.flow
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.8962.2.1.3.1.1.6.1.5.2 |
Expression | NULL |
Description | Gives average percentage of the used ICMP flows across all PEs. [OID: 1.3.6.1.4.1.8962.2.1.3.1.1.6.1.5.2] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | McAfee NSP Sensor Monitoring |
Unit | % |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | 1 – 1440 (mins) |
Filter | ||
Warning Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Warning Threshold | 70 | 0-100 |
Warning Repeat Count | 1 | 1-12 |
Critical Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 80 | 0-100 |
Critical Repeat Count | 1 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
mcafee.nsp.sensor.avg.ssl.flow
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.8962.2.1.3.1.1.6.1.7.2 |
Expression | NULL |
Description | Gives the average percentage of the used SSL flows across all PEs. [OID: 1.3.6.1.4.1.8962.2.1.3.1.1.6.1.7.2] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | McAfee NSP Sensor Monitoring |
Unit | % |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | 1 – 1440 (mins) |
Filter | ||
Warning Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Warning Threshold | 70 | 0-100 |
Warning Repeat Count | 1 | 1-12 |
Critical Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 80 | 0-100 |
Critical Repeat Count | 1 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
mcafee.nsp.sensor.avg.fragment.reassembly.buffer
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.8962.2.1.3.1.1.6.1.9.2 |
Expression | NULL |
Description | Gives the average percentage of the used fragment reassembly buffers across all PEs. [OID: 1.3.6.1.4.1.8962.2.1.3.1.1.6.1.9.2] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | McAfee NSP Sensor Monitoring |
Unit | % |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | 1 – 1440 (mins) |
Filter | ||
Warning Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Warning Threshold | 70 | 0-100 |
Warning Repeat Count | 1 | 1-12 |
Critical Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 80 | 0-100 |
Critical Repeat Count | 1 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
mcafee.nsp.sensor.avg.packet.buffer
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.8962.2.1.3.1.1.6.1.11.2 |
Expression | NULL |
Description | Gives the average percentage of the used packet buffers across all PEs. [OID: 1.3.6.1.4.1.8962.2.1.3.1.1.6.1.11.2] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | McAfee NSP Sensor Monitoring |
Unit | % |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | 1 – 1440 (mins) |
Filter | ||
Warning Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Warning Threshold | 70 | 0-100 |
Warning Repeat Count | 1 | 1-12 |
Critical Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 80 | 0-100 |
Critical Repeat Count | 1 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
mcafee.nsp.sensor.avg.attack.marker.nodes
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.8962.2.1.3.1.1.6.1.13.2 |
Expression | NULL |
Description | Gives the average percentage of the used attack marker nodes across all PEs. [OID: 1.3.6.1.4.1.8962.2.1.3.1.1.6.1.13.2] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | McAfee NSP Sensor Monitoring |
Unit | % |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | 1 – 1440 (mins) |
Filter | ||
Warning Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Warning Threshold | 70 | 0-100 |
Warning Repeat Count | 1 | 1-12 |
Critical Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 80 | 0-100 |
Critical Repeat Count | 1 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
mcafee.nsp.sensor.avg.shell.marker.nodes
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.8962.2.1.3.1.1.6.1.15.2 |
Expression | NULL |
Description | Gives the average percentage of the used shell marker nodes across all PEs. [OID: 1.3.6.1.4.1.8962.2.1.3.1.1.6.1.15.2] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | McAfee NSP Sensor Monitoring |
Unit | % |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | 1 – 1440 (mins) |
Filter | ||
Warning Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Warning Threshold | 70 | 0-100 |
Warning Repeat Count | 1 | 1-12 |
Critical Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 80 | 0-100 |
Critical Repeat Count | 1 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
mcafee.nsp.primary.power.supply.status
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.8962.2.1.2.1.7.3.0 |
Expression | NULL |
Description | Gives the present state of the primary power supply. Possible values are not-present (0), present-operational (1), present-nonoperational (2). |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | McAfee NSP Sensor Monitoring |
Unit | None |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | 1 – 1440 (mins) |
Filter | ||
Warning Operator | EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Warning Threshold | 0 | [{"0":"not-present"},{"1":"present-operational"},{"2":"present-nonoperational"}] |
Warning Repeat Count | 1 | 1-12 |
Critical Operator | EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 2 | [{"0":"not-present"},{"1":"present-operational"},{"2":"present-nonoperational"}] |
Critical Repeat Count | 1 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | No | Yes/No |
Sample Output
No graph
mcafee.nsp.secondary.power.supply.status
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.8962.2.1.2.1.7.4.0 |
Expression | NULL |
Description | Gives the present status of the secondary power supply. Possible values are not-present (0), present-operational (1), present-nonoperational (2). [OID: 1.3.6.1.4.1.8962.2.1.2.1.7.4.0] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | McAfee NSP Sensor Monitoring |
Unit | None |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | 1 – 1440 (mins) |
Filter | ||
Warning Operator | EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Warning Threshold | 0 | [{"0":"not-present"},{"1":"present-operational"},{"2":"present-nonoperational"}] |
Warning Repeat Count | 1 | 1-12 |
Critical Operator | EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 2 | [{"0":"not-present"},{"1":"present-operational"},{"2":"present-nonoperational"}] |
Critical Repeat Count | 1 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | No | Yes/No |
Sample Output
No graph
mcafee.nsp.fan.status
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.8962.2.1.2.1.7.2.0 |
Expression | NULL |
Description | Gives the present state of the fan status. Possible values are normal (0), abnormal (1). [OID: 1.3.6.1.4.1.8962.2.1.2.1.7.2.0] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | McAfee NSP Sensor Monitoring |
Unit | None |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | 1 – 1440 (mins) |
Filter | ||
Warning Operator | ||
Warning Threshold | ||
Warning Repeat Count | ||
Critical Operator | EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 1 | [{"0":"normal"},{"1":"abnormal"}] |
Critical Repeat Count | 1 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | No | Yes/No |
Sample Output
No graph
mcafee.nsp.temperature.status
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.8962.2.1.2.1.7.1.0 |
Expression | NULL |
Description | Gives the present state of the temperature status. Possible values are normal (0), abnormal (1). [OID: 1.3.6.1.4.1.8962.2.1.2.1.7.1.0] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | McAfee NSP Sensor Monitoring |
Unit | None |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | 1 – 1440 (mins) |
Filter | ||
Warning Operator | ||
Warning Threshold | ||
Warning Repeat Count | ||
Critical Operator | EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 1 | [{"0":"normal"},{"1":"abnormal"}] |
Critical Repeat Count | 1 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | No | Yes/No |
Sample Output
No graph
mcafee.nsp.sensor.avg.load
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.8962.2.1.3.1.1.5.1.1.2 |
Expression | NULL |
Description | Provides average percentage utilization of the sensor processors. [OID: 1.3.6.1.4.1.8962.2.1.3.1.1.5.1.1.2] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | McAfee NSP Sensor Monitoring |
Unit | % |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | 1 – 1440 (mins) |
Filter | ||
Warning Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Warning Threshold | 70 | 0-100 |
Warning Repeat Count | 1 | 1-12 |
Critical Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 80 | 0-100 |
Critical Repeat Count | 1 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
mcafee.nsp.number.of.malwares.blocked
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.8962.2.1.3.1.1.8.1.5.2 |
Expression | NULL |
Description | Provides number of malwares blocked. [OID: 1.3.6.1.4.1.8962.2.1.3.1.1.8.1.5.2] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | McAfee NSP Sensor Monitoring |
Unit | None |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | 1 – 1440 (mins) |
Filter | ||
Warning Operator | ||
Warning Threshold | ||
Warning Repeat Count | ||
Critical Operator | ||
Critical Threshold | ||
Critical Repeat Count | ||
Alert | No | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
mcafee.nsp.malware.protocol.error
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.8962.2.1.3.1.1.8.1.10.2 |
Expression | NULL |
Description | Provides protocol errors count. Nameserver returned malformed reply is called protocol error. [OID: 1.3.6.1.4.1.8962.2.1.3.1.1.8.1.10.2] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | McAfee NSP Sensor Monitoring |
Unit | None |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | 1 – 1440 (mins) |
Filter | ||
Warning Operator | ||
Warning Threshold | ||
Warning Repeat Count | ||
Critical Operator | ||
Critical Threshold | ||
Critical Repeat Count | ||
Alert | No | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
mcafee.nsp.malware.out.of.memory.error
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.8962.2.1.3.1.1.8.1.13.2 |
Expression | NULL |
Description | Provides out of memory errors count while processing request. [OID: 1.3.6.1.4.1.8962.2.1.3.1.1.8.1.13.2] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | McAfee NSP Sensor Monitoring |
Unit | None |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | 1 – 1440 (mins) |
Filter | ||
Warning Operator | ||
Warning Threshold | ||
Warning Repeat Count | ||
Critical Operator | ||
Critical Threshold | ||
Critical Repeat Count | ||
Alert | No | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
mcafee.nsp.sensor.health
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.8962.2.1.2.1.1.13.0 |
Expression | NULL |
Description | Provides the health of the sensor. Uninitialized means that the sensor does not have signatures hence does not detect attacks. Possible values are bad (0), good (1), uninitialized(2). [OID: 1.3.6.1.4.1.8962.2.1.2.1.1.13.0] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | McAfee NSP Sensor Monitoring |
Unit | None |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 15 | 1 – 1440 (mins) |
Filter | ||
Warning Operator | EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Warning Threshold | 2 | [{"0":"bad"},{"1":"good"},{"2":"uninitialized"}] |
Warning Repeat Count | 1 | 1-12 |
Critical Operator | EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 0 | [{"0":"bad"},{"1":"good"},{"2":"uninitialized"}] |
Critical Repeat Count | 1 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | No | Yes/No |
Sample Output
No graph