Description

It monitors hardware status parameters like Fan, Voltage, Temperature, CPU Board, CPU Cache Volume, CPU Physical, Driver and Volume. Also it monitors basic performance parameters like Memory and CPU utilization.

Prerequisites

SNMP should be enabled in end device and device should support ESM-CPU-MIB, ESM-DRIVER-MIB, ESM-ENVIRONMENT-MIB, ESM-VOLUME-MIB OIDs and SNMP credentials should be attached against the device in portal.

How to Apply: This template is All instance selection based. It will not ask user to select any instance(s) while assigning it to a device.

Metric Parameters

Metric Parameters
ParameterDescription
Frequency
  • Frequency is the interval in which you want to probe and collect metric data from the target device/resource
  • Frequency is defined in minutes (min).
  • Warning ThresholdIf the metric value satisfies the condition defined along with Warning Threshold value, then a notification is sent to the user.
    Critical ThresholdIf the metric value satisfies the condition defined along with Critical Threshold value, then a notification is sent to the user.
    AlertThe alert value can be set to either Yes or No. If it is Yes, then an alert message is sent to the user.

    Metrics

    nec.cpu.board.status

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.119.2.2.4.4.2.2.3.2.1.5
    ExpressionNULL
    DescriptionThe current status of each CPU board. Possible values for this monitor (1- Other, 2- Unknown, 3- Normal, 4- Warning, 5- Fatal, 6- Non-recoverable, 7- In-test, 8- Degraded, 9- Disabled, 10- Down, 11- Standby). Generates warning alert if value in (1,2,4,7,9,11) and generates critical alert if value in (5,6,8,10).
    [OID: 1.3.6.1.4.1.119.2.2.4.4.2.2.3.2.1.5 ]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameNEC CPU Board Status
    UnitNone

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency101 – 1440 (mins)
    FilterNULLNot Applicable
    Warning OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold1,2,4,7,9,11[{"1":"other"},{"2":"unknown"},{"3":"normal"},{"4":"warning"},{"5":"fatal"},{"6":"non-recoverable"},{"7":"in-test"},{"8":"degraded"},{"9":"disabled"},{"10":"down"},{"11":"standby"}]
    Warning Repeat Count11-12
    Critical OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold5,6,8,10[{"1":"other"},{"2":"unknown"},{"3":"normal"},{"4":"warning"},{"5":"fatal"},{"6":"non-recoverable"},{"7":"in-test"},{"8":"degraded"},{"9":"disabled"},{"10":"down"},{"11":"standby"}]
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)NoYes/No

    Sample Output

    No graph

    nec.cpu.cache.status

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.119.2.2.4.4.2.2.2.2.1.8
    ExpressionNULL
    DescriptionThe current status of each CPU cache. Possible values for this monitor (1- Other, 2- Unknown, 3- Normal, 4- Warning, 5- Fatal, 6- Non-recoverable, 7- In-test, 8- Degraded, 9- Disabled, 10- Down, 11- Standby). Generates warning alert if value in (1,2,4,7,9,11) and generates critical alert if value in (5,6,8,10).
    [OID: 1.3.6.1.4.1.119.2.2.4.4.2.2.2.2.1.8]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameNEC CPU Cache Status
    UnitNone

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency101 – 1440 (mins)
    FilterNULLNot Applicable
    Warning OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold1,2,4,7,9,11[{"1":"other"},{"2":"unknown"},{"3":"normal"},{"4":"warning"},{"5":"fatal"},{"6":"non-recoverable"},{"7":"in-test"},{"8":"degraded"},{"9":"disabled"},{"10":"down"},{"11":"standby"}]
    Warning Repeat Count11-12
    Critical OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold5,6,8,10[{"1":"other"},{"2":"unknown"},{"3":"normal"},{"4":"warning"},{"5":"fatal"},{"6":"non-recoverable"},{"7":"in-test"},{"8":"degraded"},{"9":"disabled"},{"10":"down"},{"11":"standby"}]
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)NoYes/No

    Sample Output

    No graph

    nec.cpu.physical.status

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.119.2.2.4.4.2.2.4.2.1.7
    ExpressionNULL
    DescriptionThe current status of each CPU. Possible values for this monitor (1- Other, 2- Unknown, 3- Normal, 4- Warning, 5- Fatal, 6- Non-recoverable, 7- In-test, 8- Degraded, 9- Disabled, 10- Down, 11- Standby).
    [OID: 1.3.6.1.4.1.119.2.2.4.4.2.2.4.2.1.7]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameNEC CPU Physical Status
    UnitNone

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency101 – 1440 (mins)
    FilterNULLNot Applicable
    Warning OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold1,2,4,7,9,11[{"1":"other"},{"2":"unknown"},{"3":"normal"},{"4":"warning"},{"5":"fatal"},{"6":"non-recoverable"},{"7":"in-test"},{"8":"degraded"},{"9":"disaled"},{"10":"down"},{"11":"standby"}]
    Warning Repeat Count11-12
    Critical OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold5,6,8,10[{"1":"other"},{"2":"unknown"},{"3":"normal"},{"4":"warning"},{"5":"fatal"},{"6":"non-recoverable"},{"7":"in-test"},{"8":"degraded"},{"9":"disaled"},{"10":"down"},{"11":"standby"}]
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)NoYes/No

    Sample Output

    No graph

    nec.cpu.utilization

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.119.2.2.4.4.2.2.1.22.1.21
    ExpressionNULL
    DescriptionThe individual CPU average load as a percentage during the last 5 minutes. Default warning threshold: 80%, Critical threshold: 90%. [OID:1.3.6.1.4.1.119.2.2.4.4.2.2.1.22.1.21]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameNEC CPU Utilization
    Unit%

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency51 – 1440 (mins)
    FilterNULLNot Applicable
    Warning OperatorGREATER_THAN_EQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold800-100
    Warning Repeat Count21-12
    Critical OperatorGREATER_THAN_EQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold900-100
    Critical Repeat Count21-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    nec.driver.status

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.119.2.2.4.4.17.2.2.1.5
    ExpressionNULL
    DescriptionThe current status of the driver. Possible values for this monitor(1: Other, 2: Unknown, 3: Running, 4: Suspended, 5: Disabled, 6: Stopped, 7: Start-pending, 8: Stop-pending, 9: Suspend-pending, 10: Continue-pending). Generates warning alert if value in (1,2,7,8,9,10) and generates critical alert if value in (4,5,6).
    [OIDs: 1.3.6.1.4.1.119.2.2.4.4.17.2.2.1.2, 1.3.6.1.4.1.119.2.2.4.4.17.2.2.1.5]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameNEC Driver Status
    UnitNone

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency101 – 1440 (mins)
    FilterNULLNot Applicable
    Warning OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold1,2,7,8,9,10[{"1":"other"},{"2":"unknown"},{"3":"running"},{"4":"suspended"},{"5":"disabled"},{"6":"stopped"},{"7":"start-pending"},{"8":"stop-pending"},{"9":"suspend-pending"},{"10":"continue-pending"}]
    Warning Repeat Count11-12
    Critical OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold4,5,6[{"1":"other"},{"2":"unknown"},{"3":"running"},{"4":"suspended"},{"5":"disabled"},{"6":"stopped"},{"7":"start-pending"},{"8":"stop-pending"},{"9":"suspend-pending"},{"10":"continue-pending"}]
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)NoYes/No

    Sample Output

    No graph

    nec.fan.status

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.119.2.2.4.4.10.2.3.2.1.3
    ExpressionNULL
    DescriptionThe current status of this fan. Possible values for this monitor (1: Other, 2: Unknown, 3: Normal, 4: Warning, 5: Fatal, 6: Non-recoverable, 7: In-test, 8: Degraded, 9: Disabled, 10- Down). Generates warning alert if value in (1,2,4,7,9) and generates critical alert if value in (5,6,8,10).
    [OIDs: 1.3.6.1.4.1.119.2.2.4.4.10.2.3.2.1.2, 1.3.6.1.4.1.119.2.2.4.4.10.2.3.2.1.3]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameNEC Fan Status
    UnitNone

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency101 – 1440 (mins)
    FilterNULLNot Applicable
    Warning OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold1,2,4,7,9[{"1":"other"},{"2":"unknown"},{"3":"normal"},{"4":"warning"},{"5":"fatal"},{"6":"non-recoverable"},{"7":"in-test"},{"8":"degraded"},{"9":"disabled"},{"10":"down"}]
    Warning Repeat Count11-12
    Critical OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold5,6,8,10[{"1":"other"},{"2":"unknown"},{"3":"normal"},{"4":"warning"},{"5":"fatal"},{"6":"non-recoverable"},{"7":"in-test"},{"8":"degraded"},{"9":"disabled"},{"10":"down"}]
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)NoYes/No

    Sample Output

    No graph

    nec.physical.mem.util

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.119.2.2.4.4.4.2.1.1.0,
    1.3.6.1.4.1.119.2.2.4.4.4.2.1.3.0
    ExpressionNULL
    Descriptionif(mempTotalSize == 0,0,((mempUsedSize / mempTotalSize) * 100))
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameNEC Memory Utilization
    Unit%

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency51 – 1440 (mins)
    Filter
    Warning OperatorGREATER_THAN_EQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold800-100
    Warning Repeat Count21-12
    Critical OperatorGREATER_THAN_EQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold900-100
    Critical Repeat Count21-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    nec.virtual.mem.util

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.119.2.2.4.4.4.2.2.1.0,
    1.3.6.1.4.1.119.2.2.4.4.4.2.2.2.0
    Expressionif(memvTotal== 0,0,(memvUsed / memvTotal) * 100)
    DescriptionThe total virtual memory utilization in percentage. Total [OID: 1.3.6.1.4.1.119.2.2.4.4.4.2.2.1.0], Used
    [OID: 1.3.6.1.4.1.119.2.2.4.4.4.2.2.2.0].
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameNEC Memory Utilization
    Unit%

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency51 – 1440 (mins)
    Filter
    Warning OperatorGREATER_THAN_EQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold800-100
    Warning Repeat Count21-12
    Critical OperatorGREATER_THAN_EQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold900-100
    Critical Repeat Count21-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    nec.overall.cpu.util

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.119.2.2.4.4.2.2.1.9.0
    ExpressionNULL
    DescriptionThe overall CPU average load as a percentage during the last 5 minutes. Default warning threshold: 80%, Critical threshold: 90%. [OID: 1.3.6.1.4.1.119.2.2.4.4.2.2.1.9.0]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameNEC Overall CPU Utilization
    Unit%

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency51 – 1440 (mins)
    Filter
    Warning OperatorGREATER_THAN_EQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold800-100
    Warning Repeat Count21-12
    Critical OperatorGREATER_THAN_EQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold900-100
    Critical Repeat Count21-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    nec.temperature.status

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.119.2.2.4.4.10.2.1.2.1.5,
    1.3.6.1.4.1.119.2.2.4.4.10.2.1.2.1.3
    ExpressionenvTempStatus
    DescriptionThe current status of the temperature monitored by this thermal sensor. Possible values for this monitor (1: Other, 2: Unknown, 3: Normal, 4: Warning, 5: Fatal, 6: Non-recoverable, 7: In-test, 8: Degraded, 9: Disabled, 10- Down). Generates warning alert if value in (1,2,4,7,9) and generates critical alert if value in (5,6,8,10).
    [OIDs: 1.3.6.1.4.1.119.2.2.4.4.10.2.1.2.1.2, 1.3.6.1.4.1.119.2.2.4.4.10.2.1.2.1.3, 1.3.6.1.4.1.119.2.2.4.4.10.2.1.2.1.5]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameNEC Temperature Status
    UnitNone

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency101 – 1440 (mins)
    FilterNULLNot Applicable
    Warning OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold1,2,4,7,9[{"1":"other"},{"2":"unknown"},{"3":"normal"},{"4":"warning"},{"5":"fatal"},{"6":"non-recoverable"},{"7":"in-test"},{"8":"degraded"},{"9":"disabled"},{"10":"down"}]
    Warning Repeat Count11-12
    Critical OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold5,6,8,10[{"1":"other"},{"2":"unknown"},{"3":"normal"},{"4":"warning"},{"5":"fatal"},{"6":"non-recoverable"},{"7":"in-test"},{"8":"degraded"},{"9":"disabled"},{"10":"down"}]
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)NoYes/No

    Sample Output

    No graph

    nec.temperature.unit

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.119.2.2.4.4.10.2.1.2.1.4
    ExpressionNULL
    DescriptionThe temperature unit for the current temperature.
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameNEC Temperature Status
    UnitNone

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency101 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical Operator
    Critical Threshold
    Critical Repeat Count
    AlertNoYes/No
    Graph (Yes/No)NoYes/No

    Sample Output

    No graph

    nec.voltage.status

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.119.2.2.4.4.10.2.2.2.1.4,
    1.3.6.1.4.1.119.2.2.4.4.10.2.2.2.1.3
    ExpressionenvVoltageStatus
    DescriptionThe current status of the voltage monitored by the voltage sensor. Possible values for this monitor (1: Other, 2: Unknown, 3: Normal, 4: Warning, 5: Fatal, 6: Non-recoverable, 7: In-test, 8: Degraded, 9: Disabled, 10- Down). Generates warning alert if value in (1,2,4,7,9) and generates critical alert if value in (5,6,8,10).
    [OIDs: 1.3.6.1.4.1.119.2.2.4.4.10.2.2.2.1.2, 1.3.6.1.4.1.119.2.2.4.4.10.2.2.2.1.4, 1.3.6.1.4.1.119.2.2.4.4.10.2.2.2.1.3]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameNEC Voltage Status
    UnitNone

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency101 – 1440 (mins)
    FilterNULLNot Applicable
    Warning OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold1,2,4,7,9[{"1":"other"},{"2":"unknown"},{"3":"normal"},{"4":"warning"},{"5":"fatal"},{"6":"non-recoverable"},{"7":"in-test"},{"8":"degraded"},{"9":"disabled"},{"10":"down"}]
    Warning Repeat Count11-12
    Critical OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold5,6,8,10[{"1":"other"},{"2":"unknown"},{"3":"normal"},{"4":"warning"},{"5":"fatal"},{"6":"non-recoverable"},{"7":"in-test"},{"8":"degraded"},{"9":"disabled"},{"10":"down"}]
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)NoYes/No

    Sample Output

    No graph

    nec.volume.status

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.119.2.2.4.4.29.2.3.1.2
    ExpressionNULL
    DescriptionState of volume. Possible values for this monitor (1: Other, 2: Unknown, 3: Normal, 4: Warning, 5: Fatal, 6: Non-recoverable, 7: In-test, 8: Degraded, 9: Disabled, 10- Down). Generates warning alert if value in (1,2,4,7,9) and generates critical alert if value in (5,6,8,10). [OID: 1.3.6.1.4.1.119.2.2.4.4.29.2.3.1.2]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameNEC Volume Status
    UnitNone

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency101 – 1440 (mins)
    FilterNULLNot Applicable
    Warning OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold1,2,4,7,9[{"1":"other"},{"2":"unknown"},{"3":"normal"},{"4":"warning"},{"5":"fatal"},{"6":"non-recoverable"},{"7":"in-test"},{"8":"degraded"},{"9":"disabled"},{"10":"down"}]
    Warning Repeat Count11-12
    Critical OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold5,6,8,10[{"1":"other"},{"2":"unknown"},{"3":"normal"},{"4":"warning"},{"5":"fatal"},{"6":"non-recoverable"},{"7":"in-test"},{"8":"degraded"},{"9":"disabled"},{"10":"down"}]
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)NoYes/No

    Sample Output

    No graph