Description

Template for Oracle Sun Platform. Monitors Oracle Sun operational status, unknown status, alarm status and ILOM control firmware update status. Tested on SUN BLADE 6000 MODULAR SYSTEM.

Prerequisites

SNMP should be enabled in end device and device should support SUN-PLATFORM-MIB, SUN-ILOM-CONTROL-MIB OIDs and SNMP credentials should be attached against the device in portal.

How to Apply: This template is All instance selection based. It will not ask user to select any instance(s) while assigning it to a device.

Metric Parameters

Metric Parameters
ParameterDescription
Frequency
  • Frequency is the interval in which you want to probe and collect metric data from the target device/resource
  • Frequency is defined in minutes (min).
  • Warning ThresholdIf the metric value satisfies the condition defined along with Warning Threshold value, then a notification is sent to the user.
    Critical ThresholdIf the metric value satisfies the condition defined along with Critical Threshold value, then a notification is sent to the user.
    AlertThe alert value can be set to either Yes or No. If it is Yes, then an alert message is sent to the user.

    Metrics

    oraclefirmware.status

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.42.2.175.102.6.7.0
    ExpressionNULL
    DescriptionThis property indicates the status of a firmware update. If a TFTP error occurred while attempting to upload a new firmware image, the value of this property will be tftpError(1). If the image was uploaded correctly but it did not pass verification, the value of this property will be imageVerificationFailed(2). Otherwise, the status will indicate that the update is inProgress(3) or is a success(4). A firmware update could take as long as 20 minutes. During this time, no other operations should be performed on the device. Upon success, the device will be reset. [OID:1.3.6.1.4.1.42.2.175.102.6.7.0].
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameSun ILOM Control Firmware Status
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency51 – 1440 (mins)
    Filter
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold1,2[{"1":"tftpError"},{"2":"imageVerificationFailed"},{"3":"inProgress"},{"4":"success"},{"5":"other"}]
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    oracle.unknown.status

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.42.2.70.101.1.1.2.1.4
    ExpressionNULL
    DescriptionProvides the unknown status of the managed object. Possible states are 1- True, 2- False.
    [OID: 1.3.6.1.4.1.42.2.70.101.1.1.2.1.4]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameSun Platform Equipment
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency51 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical Operator
    Critical Threshold
    Critical Repeat Count
    AlertNoYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    oracle.alarm.status

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.42.2.70.101.1.1.2.1.3
    ExpressionNULL
    DescriptionIndicates the alarm status of the managed object. Possible values are 1- Critical, 2- Major, 3- Minor, 4- Indeterminate, 5- Warning, 6- Pending, 7- Cleared. [OID: 1.3.6.1.4.1.42.2.70.101.1.1.2.1.3]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameSun Platform Equipment
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency51 – 1440 (mins)
    FilterNULLNot Applicable
    Warning OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold3,4,5[{"1":"Critical"},{"2":"Major"},{"3":"Minor"},{"4":"Interminate"},{"5":"Warning"},{"6":"Pending"},{"7":"Cleared"}]
    Warning Repeat Count11-12
    Critical OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold1,2[{"1":"Critical"},{"2":"Major"},{"3":"Minor"},{"4":"Interminate"},{"5":"Warning"},{"6":"Pending"},{"7":"Cleared"}]
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    operational.state

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.42.2.70.101.1.1.2.1.2,
    1.3.6.1.4.1.42.2.70.101.1.1.2.1.1
    Expressionif(sunPlatEquipmentAdministrativeState==2, sunPlatEquipmentOperationalState,0)
    DescriptionDescribes the Operational State and Administrative state of the managed object and . Possible values are 0:Admin Locked or Shutting down 1: disabled 2: enabled
    [OIDs: 1.3.6.1.4.1.42.2.70.101.1.1.2.1.1, 1.3.6.1.4.1.42.2.70.101.1.1.2.1.2]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameSun Platform Equipment
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency51 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical OperatorEQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold1[{"0":"AdminLockedorShutdown"},{"1":"Disabled"},{"2":"Enabled"}]
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph