Description

Monitors the cumulative statistics like the total number of Area Border Routers reachable within this area, the total number of Autonomous System Border Routers reachable within this area, the number of times that the intra-area route table has been calculated using this area’s link state database, the total number of link state advertisements in this area’s link state database, excluding AS-external LSAs of one of the router’s attached areas and also neighbor statistics like neighbor state, events count and re transmission queue length.

Prerequisites

SNMP should be enabled in end device and device should support OSPF-MIB OIDs and SNMP credentials should be attached against the device in portal.

How to Apply: This template is All instance selection based. It will not ask user to select any instance(s) while assigning it to a device.

Metric Parameters

Metric Parameters
ParameterDescription
Frequency
  • Frequency is the interval in which you want to probe and collect metric data from the target device/resource
  • Frequency is defined in minutes (min).
  • Warning ThresholdIf the metric value satisfies the condition defined along with Warning Threshold value, then a notification is sent to the user.
    Critical ThresholdIf the metric value satisfies the condition defined along with Critical Threshold value, then a notification is sent to the user.
    AlertThe alert value can be set to either Yes or No. If it is Yes, then an alert message is sent to the user.

    Metrics

    ospf.area.bdr.reachableroutercount

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.2.1.14.2.1.5
    ExpressionNULL
    DescriptionThe total number of Area Border Routers reachable within this area. This is initially zero and is calculated in each Shortest Path First (SPF) pass. [OID: 1.3.6.1.2.1.14.2.1.5]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameOSPF Area
    UnitNone

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical Operator
    Critical Threshold
    Critical Repeat Count
    AlertNoYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    ospf.area.autonomous.sbr.reachablerouters

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.2.1.14.2.1.6
    ExpressionNULL
    DescriptionThe total number of Autonomous System Border Routers reachable within this area. This is initially zero and is calculated in each SPF pass. [OID: 1.3.6.1.2.1.14.2.1.6]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameOSPF Area
    UnitNone

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical Operator
    Critical Threshold
    Critical Repeat Count
    AlertNoYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    ospf.spf.runs.count

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.2.1.14.2.1.4
    ExpressionNULL
    DescriptionThe number of times that the intra-area route table has been calculated using this area's link state database. This is typically done using Dijkstra's algorithm. [OID: 1.3.6.1.2.1.14.2.1.4]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameOSPF Area
    UnitNone

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical Operator
    Critical Threshold
    Critical Repeat Count
    AlertNoYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    ospf.area.lsa.count

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.2.1.14.2.1.7
    ExpressionNULL
    DescriptionThe total number of link state advertisements in this area's link state database, excluding AS-external LSAs. [OID: 1.3.6.1.2.1.14.2.1.7]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameOSPF Area
    UnitNone

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical Operator
    Critical Threshold
    Critical Repeat Count
    AlertNoYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    ospf.neighbor.state

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.2.1.14.10.1.3,
    1.3.6.1.2.1.14.10.1.6
    ExpressionospfNbrState
    DescriptionMonitors the state of the relationship with this neighbor. Possible values are 1- down, 2- attempt, 3- init, 4- twoWay, 5- exchangeStart, 6- exchange, 7- loading, 8- full. [OIDs: 1.3.6.1.2.1.14.10.1.6, 1.3.6.1.2.1.14.10.1.1, 1.3.6.1.2.1.14.10.1.3]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameOSPF Neighbor Monitors
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    FilterNULLNot Applicable
    Warning OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold2,3,5,6,7[{"1":"down"},{"2":"attempt"},{"3":"init"},{"4":"twoWay"},{"5":"exchangeStart"},{"6":"exchange"},{"7":"loading"},{"8":"full"}]
    Warning Repeat Count11-12
    Critical OperatorEQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold1[{"1":"down"},{"2":"attempt"},{"3":"init"},{"4":"twoWay"},{"5":"exchangeStart"},{"6":"exchange"},{"7":"loading"},{"8":"full"}]
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    OSPF Neighbor State

    OSPF Neighbor State

    ospf.neighbor.events.count

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.2.1.14.10.1.7,
    1.3.6.1.2.1.14.1.28.0
    ExpressionospfNbrEvents
    Description
    Monitors the number of times this neighbor relationship has changed state or an error has occurred. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ospfDiscontinuityTime. [OIDs: 1.3.6.1.2.1.14.10.1.7, 1.3.6.1.2.1.14.1.28.0]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameOSPF Neighbor Monitors
    Unitpsec

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical Operator
    Critical Threshold
    Critical Repeat Count
    AlertNoYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    OSPF Neighbor Event Count

    OSPF Neighbor Event Count

    ospf.neighbor.retransque.length

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.2.1.14.10.1.8
    ExpressionNULL
    DescriptionMonitors the current length of the re-transmission queue. [OID: 1.3.6.1.2.1.14.10.1.8]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameOSPF Neighbor Monitors
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical Operator
    Critical Threshold
    Critical Repeat Count
    AlertNoYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    OSPF Neighbor Retransmission Queue Length

    OSPF Retransmission Queue Length