Description
Monitors Pure Storage Array parameters like array read bandwidth, array write bandwidth in MB per second, array read operations per sec, array write operations per sec, array read latency and array write latency.
Prerequisites
SNMP should be enabled in end device and device should support PURESTORAGE-MIB and SNMP credentials should be attached against the device in portal.
Metric Parameters
Parameter | Description |
---|---|
Frequency | Warning Threshold | If the metric value satisfies the condition defined along with Warning Threshold value, then a notification is sent to the user. |
Critical Threshold | If the metric value satisfies the condition defined along with Critical Threshold value, then a notification is sent to the user. |
Alert | The alert value can be set to either Yes or No. If it is Yes, then an alert message is sent to the user. |
Metrics
pure.array.read.bandwidth
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.40482.4.1.0 |
Expression | (pureArrayReadBandwidth)/1048576 |
Description | Provides information of the array read bandwidth in MB per second. [OID: 1.3.6.1.4.1.40482.4.1.0] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Pure Storage Performance |
Unit | MBps |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 10 | 1 – 1440 (mins) |
Filter | ||
Warning Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Warning Threshold | 1000 | 0..4294967295 |
Warning Repeat Count | 2 | 1-12 |
Critical Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 2000 | 0..4294967295 |
Critical Repeat Count | 2 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
pure.array.write.bandwidth
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.40482.4.2.0 |
Expression | (pureArrayWriteBandwidth)/1048576 |
Description | Provides information of the array write bandwidth in MB per second. [OID: 1.3.6.1.4.1.40482.4.2.0] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Pure Storage Performance |
Unit | MBps |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 10 | 1 – 1440 (mins) |
Filter | ||
Warning Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Warning Threshold | 500 | 0..4294967295 |
Warning Repeat Count | 2 | 1-12 |
Critical Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 1200 | 0..4294967295 |
Critical Repeat Count | 2 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
pure.array.read.io.operations
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.40482.4.3.0 |
Expression | NULL |
Description | Provides information of the array read input output operations per second. [OID: 1.3.6.1.4.1.40482.4.3.0] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Pure Storage Performance |
Unit | psec |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 10 | 1 – 1440 (mins) |
Filter | ||
Warning Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Warning Threshold | 60000 | 0..4294967295 |
Warning Repeat Count | 2 | 1-12 |
Critical Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 90000 | 0..4294967295 |
Critical Repeat Count | 2 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
pure.array.write.io.operations
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.40482.4.4.0 |
Expression | NULL |
Description | Provides information of the array write input output operations per second. [OID: 1.3.6.1.4.1.40482.4.4.0] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Pure Storage Performance |
Unit | psec |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 10 | 1 – 1440 (mins) |
Filter | ||
Warning Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Warning Threshold | 40000 | 0..4294967295 |
Warning Repeat Count | 2 | 1-12 |
Critical Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 60000 | 0..4294967295 |
Critical Repeat Count | 2 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
pure.array.read.latency
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.40482.4.5.0 |
Expression | (pureArrayReadLatency)/1000 |
Description | Provides information of the array read latency in millisecond per operation. [OID: 1.3.6.1.4.1.40482.4.5.0] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Pure Storage Performance |
Unit | ms |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 10 | 1 – 1440 (mins) |
Filter | ||
Warning Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Warning Threshold | 10 | 0 - 2147483647 |
Warning Repeat Count | 2 | 1-12 |
Critical Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 15 | 0 - 2147483647 |
Critical Repeat Count | 2 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph
pure.array.write.latency
Metric Details
Applicable for | Device |
SNMP OID | 1.3.6.1.4.1.40482.4.6.0 |
Expression | (pureArrayWriteLatency)/1000 |
Description | Provides information of the array write latency in millisecond per operation. [OID: 1.3.6.1.4.1.40482.4.6.0] |
Category | SNMP monitors |
Collector Type | Gateway |
Monitor Name | Pure Storage Performance |
Unit | ms |
Possible Inputs
Metric | Input Value | Range of Values |
---|---|---|
Frequency | 10 | 1 – 1440 (mins) |
Filter | ||
Warning Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Warning Threshold | 10 | 0 - 2147483647 |
Warning Repeat Count | 2 | 1-12 |
Critical Operator | GREATER_THAN_EQUAL | Ends with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with |
Critical Threshold | 15 | 0 - 2147483647 |
Critical Repeat Count | 2 | 1-12 |
Alert | Yes | Yes/No |
Graph (Yes/No) | Yes | Yes/No |
Sample Output
No graph